Download Sharp AR-FX12 Specifications
Transcript
[00]COVER.fm 1 ページ 2004年10月26日 火曜日 午後3時41分 CODE : 00ZARFX12/A1E LASER PRINTER OPTIONS FAX EXPANSION KIT (For North America) MODEL AR-FX12 OPTION AR-MM9 CONTENTS [1] PRODUCT OUTLINE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 1 [2] CONFIGURATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 1 [3] SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 1 [4] EXTERNAL VIEWS AND INTERNAL STRUCTURES . . . . . . . 4 - 1 [5] UNPACKING AND INSTALLATION. . . . . . . . . . . . . . . . . . . . . . 5 - 1 [6] SIMULATIONS, FAX SOFTWARE SWITCH. . . . . . . . . . . . . . . 6 - 1 [7] MACHINE OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 1 [8] ELECTRICAL SECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 1 Parts marked with “ “ are important for maintaining the safety of the set. Be sure to replace these parts with specified ones for maintaining the safety and performance of the set. SHARP CORPORATION This document has been published to be used for after sales service only. The contents are subject to change without notice. [co]CONTENTS.fm 1 ページ 2004年10月26日 火曜日 午後3時41分 CONTENTS [1] PRODUCT OUTLINE . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 [6] SIMULATIONS, FAX SOFTWARE SWITCH 1. Entering the simulation mode . . . . . . . . . . . . . . . . . . . . 6-1 [2] CONFIGURATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 2. Switching the simulation mode . . . . . . . . . . . . . . . . . . . 6-1 3. Canceling the simulation mode . . . . . . . . . . . . . . . . . . . 6-1 4. Simulation list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1 [3] SPECIFICATIONS 1. FAX function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1 [4] EXTERNAL VIEWS AND INTERNAL STRUCTURES 1. Operation panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1 2. FAX mode (Condition setting screen). . . . . . . . . . . . . . 4-2 3. PWB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4 5. Detail of simulations . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-4 6. FAX software switch . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-25 [7] MACHINE OPERATION 1. Key operator program . . . . . . . . . . . . . . . . . . . . . . . . . . 7-1 2. Originals that can be faxed . . . . . . . . . . . . . . . . . . . . . . 7-2 3. Own number sending . . . . . . . . . . . . . . . . . . . . . . . . . . 7-3 4. Quick On-line . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-3 [5] UNPACKING AND INSTALLATION . . . . . . . . . . . . . . . . . 5-1 5. Trouble codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-4 [8] ELECTRICAL SECTION 1. Block Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-1 2. Actual Wiring Diagram . . . . . . . . . . . . . . . . . . . . . . . . . 8-2 3. Circuit Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-3 4. Part Layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-19 [01]OUTLINE ・ CONFIGU.fm 1 ページ 2004年10月26日 火曜日 午後3時42分 [1] PRODUCT OUTLINE This unit provides the FAX function and the PC-FAX function when installed to the following machines: Machines to install this unit : •AR-M355U/M455U •AR-M351U/M451U •AR-M355N/M455N •AR-M351N/M451N [2] CONFIGURATION Extended memory <AR-MM9> * Installed to FAX I/F PWB. FAX I/F PWB *1 FAX Interface cable FAX-BOX unit <AR-FX12> *1) Installed to the machine MFP controller PWB. AR-FX12 PRODUCT OUTLINE • CONFIGURATION 1-1 [03]SPECIFICATIONS.fm 1 ページ 2004年10月26日 火曜日 午後3時42分 [3] SPECIFICATIONS F. Plural destinations specifications 1. FAX function A. Mode Scanner (Scan to E-mail, Scan to Sharpdesk, Scan to FTP, Scan to HDD), FAX, Internet FAX B. Support system Mode Support server Scanner SMTP Server FTP Server Internet FAX POP Server SMTP Server ESMTP Server FAX --- C. Support image Mode Fail system Compression system Scanner TIFF, PDF • No compression • G3(First dimension) *1 • G4 *2 Internet FAX FAX TIFF-F, TIFF-FX --MH, MMR MH, MR, MMR, JBIG *1) G3 (First dimension) = MH(Modified Huffman) *2) G4 = MMR (Modified MR) Scanner Internet FAX FAX Specified by one-touch, group, or direct destination input (*). U model: Group, interface broadcast, total 100 items N model: Group, interface broadcast, total 5000 items O (FTP/Desktop: Broadcast is disabled.) Sequential send --request FAX O ) are for U model Mode Scanner Internet FAX Corresponds to 256 gradations. O * Direct destination input: Input by 10-key or soft keyboard other than one touch. * For broadcast including FAX , it is the FAX resolution. * For broadcast of the internet FAX and the scanner, it is the internet FAX resolution. * The compression type of broadcast conforms to the key operation setting. G. Function Values in ( D. Image process Mode Half-tone reproduction Density adjustment Image quality selection Resolution (Differs depending on the file type/ send method). Mode Destination specifications Number of items which can be registered by direct destination input Broadcast send Scanner Send Memory send function Automatic + 5 steps Half-tone ON/OFF (*) is inhibited. On-hook --Memory send is performed when the upper limit value is set. Internet FAX FAX O --- O Quick online send --- O Direct send --- Only when on-hook Automatic reduction send --- O A3 A3 B4 Rotational send O E. Destination specification Values in ( ) are for the U model Zoom send O (Only fixed size fixed size. Rotation is disable for some combinations.) Mode LDAP Destination specifications One-touch destination registration items Group Recall mode Error --- O Busy --- --- 200 x 200dpi* 200 x 100dpi* 300 x 300dpi 200 x 200dpi 400 x 400dpi 200 x 400dpi 600 x 600dpi 400 x 400dpi --- 600 x 600dpi Normal text (203.2x97.8dpi)* Fine (203.2 x 195.6dpi) Super fine (203.2 x 391dpi) Ultra fine (406.4 x 391dpi) --- Scanner Internet FAX FAX O (Can be registered as one-touch address.) Specified by input of one-touch, group, and direct destination. Total Max. 999 (500) items. Sub total of 200 (100) items (FTP and desktop) of them O 500 (300) items can be registered as one-touch dial and direct input. Program O (8 items) Direct Soft keyboard Input by 10-key, destination input # key, * key Chain dial --Common with (Direct pause, up to 64 destination digits input) Resend Calls the previous destination. Reduction Calls the destination registration number by 10-key destination input. selection B4 A4 A4 O Number of times and time are set by the key operations. Book document send O Long size document send O O File division send O --- Send size limitation O O Number of items Max. 999 items (500) of senders which can be registered Receive Automatic receive --function Manual receive --Memory receive O O --- O Fixed size --reduction receive O Specified size zoom receive --- Rotational receive --- AR-FX12 SPECIFICATIONS 3-1 O Max. 800mm O --- [03]SPECIFICATIONS.fm 2 ページ 2004年10月26日 火曜日 午後3時42分 Mode Scanner Receive Division receive function Internet FAX FAX --- Conditions setting by key operation Duplex receive --- Conditions setting by key operations 2 in 1 receive --- Address/domain specification receive enable --- O (50 items) --- Address/domain specification receive disable --- O (50 items) Specified number only Mode Other External TEL connection remote --- O Answering TEL connection --- X (PAT counter measure) Transfer function when output is disable --- Automatic boot mode --- O Special Time specification O function Paling receive --- Scanner PC send --- Mode Electrical transmission time Scanner Modem speed --- Mutual transmission Communication line --- --- O --- O O ECM Cover function --- --- X I. Record size Sender print --- O Page division O Page connection X Confidential (Remote machine) --- Interface broadcast specification --- Large scale document mode O Center erase O 2 in 1 O Card shot Report/ List Communication function report list Address/TEL number table Mode Max. record width Record size Scanner Internet FAX 293mm --- A3 - A5,11" x 17" - 5.5" x 8.5" O (F code system) Mode Sub address Pass code O O O O ID • Sender address table --- Sender table O (Sender registration table) Confidential box check table --- O (Integrated with the memory box table). Interface group table --- O (Integrated with the memory box table). Program table O X Listed on the key operation list. AR-FX12 SPECIFICATIONS 3-2 FAX 2sec range (Super G3/JBIG) 6 sec range (G3 ECM) 33.6kbps 2.4kbps Automatic Fall back Super G3 / G3 --- J. F code communication Group table PC-FAX Public telephone line (PSTN), Private branch exchange (PBX), F net O O (F code system) O X Internet FAX --- --- X PC-iFAX H. Transmission system --- O O (FAX mode only) --In case of an error, an output may be made. --- Edge erase FAX Memory content cleat notification table Bulletin board send Send message Internet FAX Report/ Send reservation X List table function Memory box table --- Scanner ----- FAX Internet FAX FAX O O [04]ETERNALVIEWS.fm 1 ページ 2004年10月26日 火曜日 午後3時42分 [4] EXTERNAL VIEWS AND INTERNAL STRUCTURES 1. Operation panel Model Key name Description in this manual AR-M355N/ AR-M455N Described in the configuration where the optional fax expansion kit (AR-FX12) is installed on the AR-M355N/AR-M455N models. AR-M355U/ AR-M455U No functions related to document filing or Internet fax reception are described in this manual. 1 Touch panel (following page) 2 3 4 5 6 7 8 • Messages and keys appear in the touch panel. Touch the displayed keys to select functions and enter settings. • When a key in the touch panel is touched, a beep sounds and the key is highlighted. • Keys that cannot be selected in a screen are grayed out. If touched, a double-beep will sound to alert you that the key cannot be selected. Mode select keys Use these keys to change modes. [IMAGE SEND] Press to switch to fax mode. The main screen of fax mode will appear. The screen that appears when this key is selected can key be changed with "Default display settings" in the key operator programs. Numeric keys Use to enter fax numbers, sub-addresses, passcodes, and numerical settings. [C] key (clear key) Use to clear a mistake when entering fax numbers, sub-addresses, passcodes, and numerical settings. One digit is cleared each time you press the key.When an original is being scanned, this key can also be used to cancel scanning. [CA] key Use to cancel a transmission or programming operation. When this key is pressed, the operation is canceled and you return to (clear all key) the main screen described on the following page. This key is also used to cancel resolution, paper size and special mode settings. [ ] key This is used to produce tone signals when you are on a pulse dial line. [START] key Press to begin scanning an original for fax transmission. AR-FX12 EXTERNAL VIEWS AND INTERNAL STRUCTURES 4-1 [04]ETERNALVIEWS.fm 2 ページ 2004年10月26日 火曜日 午後3時42分 2. FAX mode (Condition setting screen) The condition settings screen of fax mode is displayed by pressing the [IMAGE SEND] key while the document filing mode (printer mode), copy mode, or job status screen appears in the touch panel. In the explanations that follow, it is assumed that the initial screen that appears after pressing the [IMAGE SEND] key is the condition settings screen (shown below). If you have set the display to show the address book screen (following page) when the [IMAGE SEND] key is pressed, touch the [CONDITION SETTINGS] key in the address book screen to display the condition settings screen. "Default display settings" in the key operator programs can be used to select whether the condition settings screen (below) appears or the address book screen (next page) appears when the [IMAGE SEND] key is pressed. • When the network scanner option is installed, you can select whether the "E-MAIL/FTP" screen or the "INTERNET FAX" screen appears when the [IMAGE SEND] key is pressed (the selection is made in the key operator programs). A. Condition setting screen The display is initially set (factory setting) to show the following condition setting screen as the initial screen. READY TO SEND. AUTO EXPOSURE SPEAKER RESEND FAX MODE SWITCH ADDRESS BOOK ADDRESS REVIEW STANDARD RESOLUTION SPECIAL MODES SUB ADDRESS AUTO ORIGINAL 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 FILE AUTO RECEPTION FAX MEMORY:100% QUICK FILE Message display [MODE SWITCH] key Messages appear here to indicate the current status of the machine. The icon at left indicates fax mode. Use this key when the network scanner option is installed to switch between the "E-MAIL/FTP" and "INTERNET FAX" screens [ ] key (Speed dial key) When a one-touch dial key or group key is stored in the address book, the machine automatically assigns it a 3-digit number. This key and the Speed Dial number can be used to abbreviate the transmission procedure. [SPEAKER] key Touch the [SPEAKER] key to dial and transmit a fax manually. During dialing it changes into the [PAUSE] key, and after pressing the [SUB ADDRESS] key it changes into the [SPACE] key. [RESEND] key Touch this key to redial the number most recently dialed with the numeric keys or a one-touch dial key. After dialing, this key changes into the [NEXT ADDRESS] key. [ADDRESS BOOK] key Touch this key to display the address book screen (next page). Touch this key when you want to use an auto-dial number (one-touch dialing or group dialing). [ADDRESS REVIEW] key When performing a broadcast transmission, touch this key to check your selected destinations. The selected destinations will appear and any unneeded destinations can be deleted. [SPECIAL MODES] key Touch this key to select one of the following special functions: •Edge erase •Dual page scan •Timer transmission •2in1 •Card shot •Job build mode •Polling •Memory box •Program •Transaction report [FILE] key* Touch this key to store a document image that you are transmitting in the hard disk (this includes selecting a user name, file name, and location). [QUICK FILE] key* Touch this key to store a document image that you are transmitting in the temporary storage folder. Memory and reception mode This shows the amount of fax memory that is free and the currently selected reception mode. display [SUB ADDRESS] key Touch this key to enter a sub-address and passcode when using F-code transmission. Two-sided scanning icon Icons appear here when you touch the [ORIGINAL] key and select two-sided scanning. The icons can be touched to display open function selection screens. [ORIGINAL] key Touch this key when you wish to manually set the size of the original to be scanned or scan both sides of the original. [RESOLUTION] key Touch this key to change the resolution setting for the original to be scanned. The selected resolution setting will be highlighted above the key. The initial factory setting is [STANDARD]. [EXPOSURE] key Touch this key to change the exposure setting for the original to be scanned. The selected exposure setting will be highlighted above the key. The initial factory setting is AUTO. Special mode icon display When a special mode such as polling or dual page scan is selected, a special mode icon appears here. * Can only be used on the AR-M355N/AR-M455N. The AR-M355U/AR-M455U models do not have this function. AR-FX12 EXTERNAL VIEWS AND INTERNAL STRUCTURES 4-2 [04]ETERNALVIEWS.fm 3 ページ 2004年10月26日 火曜日 午後3時42分 B. Address book screen (alphabetically ordered) The screen below appears initially when the address book is set as the initial screen using "Default display settings" in the key operator programs. • The screen below is the alphabetical index screen. You can also have the user index screen appear initially. • The screen appears as shown below when the network scanner option is not installed. READY TO SEND. A B C D E F G H FREQUENT USE ABCD RESEND SPEAKER EFGHI CONDITION SETTINGS 1/2 ADDRESS REVIEW GLOBAL ADDRESS SEARCH JKLMN OPQRST UVWXYZ ABC GROUP 1 One-touch key display 2 3 4 5 6 This shows the one-touch keys that have been stored on the selected "index card". The key type is indicated by the icon at the right. One-touch keys in which a fax number is stored are indicated by a " " icon. The display is initially set to show 6 keys. This can be changed to 8 or 12 using the key operator program. Display illustrations in this manual show the display set to eight keys. Display switching keys When more one-touch keys are stored than can be displayed in one screen, touch the " " keys to change screens. [CONDITION SETTINGS] key This displays the condition settings screen (previous page), which is used to set various conditions. [GLOBAL ADDRESS Touch this key to search for a fax number on an LDAP server. SEARCH] key [ABC GROUP] key Touch this key to switch between the alphabetical index and the group index. Index keys One-touch key destinations are stored on each of these index cards (alphabetical index or group index). Each time the selected tab is touched, the key display order changes from the order of storing (the initial display order), to ascending order, to descending order. As this is done, the icon on the tab indicates the current display order. Storing or order (initially selected) FREQUENT USE ABCD Ascending order FREQUENT USE ABCD Descending order FREQUENT USE ABCD Group indexes make it possible to store one-touch keys by group with an assigned name for easy reference. This is done with the custom settings. Frequently used onetouch key destinations can be stored on the FREQUENT USE card for convenient access. NOTE When the network scanner option is installed and a destination other than a fax numbers is stored in a one-touch key, one of the following icons will appear. : Scan to E-mail destination : Internet fax destination : Scan to FTP destination : Scan to Desktop destination : Multiple destinations (Scan to E-mail, fax, etc.) AR-FX12 EXTERNAL VIEWS AND INTERNAL STRUCTURES 4-3 [04]ETERNALVIEWS.fm 4 ページ 2004年10月26日 火曜日 午後3時42分 3. PWB 3 2 1 6 5 4 1 2 3 4 5 6 Modem control PWB FAX FLASH ROM PWB FAX power PWB TEL/LIU PWB FAX I/F PWB (Installed to the machine side) FAX extended memory (Installed to FAX I/F PWB) FAX communication control FAX control program Supplies power to the FAX unit. TEL line communication control Connection between FAX and MFP controller <AR-MM9> AR-FX12 EXTERNAL VIEWS AND INTERNAL STRUCTURES 4-4 [05]UNPACKINGANDINSTALLATION.fm 1 ページ 2004年10月26日 火曜日 午後3時43分 [5] UNPACKING AND INSTALLATION <Before installation> • For installation of AR-FX12, the control PWB unit and the scanner unit must have been installed. • Start installation after checking that the COMMUNICATION indictor on the operation panel is neither lit nor blinking. 3)Remove the FAX I/F cover. Remove the two screws that secure the FAX I/F cover of the control PWB unit and remove the FAX I/F cover. <Procedure for mounting additional memory (AR-MM9)> * If mounting of additional memory is not needed, proceed to step 5. 4)Mount the additional memory. Mount the additional memory to the socket located on the back side of the interface PWB unit. 5)Attach the fax interface PWB unit. 1)Turn off the power switch of the main unit. Then remove the power plug of the main unit from the outlet. Connect the fax interface PWB unit to the fax interface PWB connector (100 pins) of the control PWB unit and secure it with two screws C. 2)Pull out the control PWB unit. <1>Remove the scanner cable from the control PWB unit. 6)Reattach the control PWB unit. <1>Reattach the control PWB unit to the main unit. <2>Connect the flat cable that has been removed in step 2)-<4> to the connector. <3>Push the control PWB unit into the main unit and secure it with the five screws. <2>Remove the five screws that secure the control PWB unit to the main unit. <3>Hold the two grips and pull out the control PWB unit until it is stopped by the stopper. <4>Remove the connector of the flat cable. <5>While unlocking the stopper with your finger, pull the control PWB unit to remove it from the main unit. AR-FX12 UNPACKING AND INSTALLATION 5-1 [05]UNPACKINGANDINSTALLATION.fm 2 ページ 2004年10月26日 火曜日 午後3時43分 7)Attach the fax box unit. 11)Set the destination for the main unit. <1>Secure screw A to the rack. <2>Fit the positioning hole located on the side facing fax box unit to screw A, slide the fax box unit toward the rack, and secure the rack and the fax box unit using two screws B. • Be sure to set the destination for the main unit before setting the destination for the fax. <1>Switch the operation panel to the copy mode and use the key operation [P], [*], [C], and [*] to enter the simulation mode. <2>Use the 10-key pad to enter [26] in the main code entry screen and press the [START] key. <3>The sub-code list is displayed. Use the 10-key pad to enter [6] and press the [START] key. 8)Connect the fax power supply connector. <1>Ensure that the fax power switch is set to “OFF”. <2>Remove the screw from the connector cover for connection of the fax power supply connector of the main unit and remove the connector cover. <3>Connect the fax power supply connector to the connector of the main unit. <4>Secure the connector by lightening the three screws on the connector. <4>Select the desired destination from the destination list by entering the number and press the [START] key. When you press the [START] key, this machine will be rebooted and will start with the setting of the selected destination for the main unit. Example: To set the UK as the destination, select it from the destination list by entering [7] and press the [START] key. 9)Connect the connector. Connect the fax interface cable to the fax box unit and the control PWB unit. Connect the scanner cable that has been removed in step 2. 12)Set the destination for the fax. <1>Switch the operation panel to the copy mode and use the key operation [P], [*], [C], and [*] to enter the simulation mode. <2>Use the 10-key pad to enter [66] in the main code entry screen and press the [START] key. <3>Use the 10-key pad to enter [2] in the sub-code entry screen and press the [START] key. 10)Turn on the power switches of the main unit. Insert the power plug of the main unit to the outlet and turn on the power switch of the main unit and the fax power switch of the box unit. AR-FX12 UNPACKING AND INSTALLATION 5-2 [05]UNPACKINGANDINSTALLATION.fm 3 ページ 2004年10月26日 火曜日 午後3時43分 <4>Select the desired destination from the destination list (separate table 1) by entering the number using the 10-key pad and press the [START] key. (For example, to set the UK as the destination, enter [10110100] using the 10-key pad and then press the [START] key. <4>Use the 10-key pad to enter [1] in the submenu screen and press the [START] key. <5>The screen shown below is displayed and memory clear operation is executed. <5>Check the destination in the following screen. If the destination is correct, enter [1] (YES) using the 10-key pad and press the [START] key. <6>After several minutes, memory clear operation will be completed and then this machine will be automatically rebooted. 14)Connect the line cable to the fax box unit. <6>Press the [CA] key. * This machine will be rebooted and will start with the setting of the selected destination for the fax. Connect the line cable to the fax box unit. As shown in the figure, insert the FAX cable terminal (with the core attached) into the FAX box unit. Separate table 1: Setting value of destination for fax Destination FAX Software SW No.1 - 8 U.S.A 1 0 1 1 0 1 0 AUSTRALIA 0 0 0 0 1 0 0 1 1 NEWZEALAND 0 1 1 1 1 1 1 0 U.K. 1 0 1 1 0 1 0 0 FRANCE 0 0 1 1 1 1 0 1 GERMANY 0 0 0 0 0 1 0 0 SWEDEN 1 0 1 0 0 1 0 1 13)Clear the image memory. • If an additional memory (AR-MM9) has been mounted, be sure to carry out this step. If no additional memory has been mounted, this step is not necessary. <1>Switch the operation panel to the copy mode and use the key operation [P], [*], [C], and [*] to enter the simulation mode. <2>Use the 10-key pad to enter [66] in the main code entry screen and press the [START] key. <3>Use the 10-key pad to enter [10] in the sub-code entry screen and press the [START] key. AR-FX12 UNPACKING AND INSTALLATION 5-3 [06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 1 ページ 2004年10月26日 火曜日 午後3時44分 [6] SIMULATIONS, FAX SOFTWARE SWITCH 1. Entering the simulation mode a. Normal mode Enter the copy mode and perform the following procedures. [P] [*] [C] [*] [Main code] [START] [Sub code] [START] b. FAX mode Enter the copy mode and perform the following procedures. [9] [*] [8] [#] [7] 2. Switching the simulation mode Press [USER SETTING] to return to the code entry screen. 3. Canceling the simulation mode Press CA key to cancel the simulation mode. 4. Simulation list Code Function (Content) Purpose Section Item Main Sub 22 5 Used to check the ROM version of each unit (section). Other Software 6 Used to print the list of adjustments and setup data (simulations, FAX soft switches, counters). Adjustment, setup, operation data output, check (print) Data 11 Used to check the use frequency of FAX. (send/receive) (Only when FAX is installed.) Adjustment, setup, operation data output, check (display) FAX Data FAX Counter 23 2 24 10 Used to clear the FAX counter. (After completion of maintenance, this counter must be cleared.) (Only when FAX is installed.) Jam/Trouble data print Data clear 46 12 Used to adjust the print density in the FAX mode (all modes). An adjustment with this simulation affects all the copy density adjustment values. (Only when FAX is installed) Adjustment Picture quality 13 Used to adjust the print density in the FAX mode (Standard mode). (Only when FAX is installed.) Adjustment Picture quality 14 Used to adjust the print density in the FAX mode (Fine mode). (Only when FAX is installed.) Adjustment Picture quality 15 Used to adjust the print density in the FAX mode (Super Fine mode). (Only when FAX is installed.) Adjustment Picture quality 16 Used to adjust the print density in the FAX mode (Ultra Fine mode). (Only when FAX is installed.) Adjustment Picture quality Adjustment Operation 56 1 Data transfer 61 3 Used to adjust laser power (absolute value) in the FAX reception mode. (Only when FAX is installed.) AR-FX12 SIMULATIONS, FAX SOFTWARE SWITCH 6-1 Setup, adjustment data [06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 2 ページ Code 2004年10月26日 火曜日 午後3時44分 Function (Content) Purpose Section Item Main Sub 66 1 Used to set the FAX soft switch function. (Used to utilize the FAX soft switch function.) Setup FAX 2 Used to set the FAX soft switch setup to the default. (Except for the adjustment values) Data clear FAX Data 3 Used to check the operations of FAX PWB memory (read/write). (This adjustment is required when replacing the PWB with a new one.) Operation test, check FAX Data 4 Used to check the operations of data signal output in the FAX data output mode. (Used to check the MODEM operation.) Send level Max. (Only when FAX is installed.) Operation test, check FAX Operation 5 Used to check the operations of data signal output in the FAX Operation test, check data output mode. (Used to check the MODEM operation.)Signals are sent in the send level set with the soft switch. (Only when FAX is installed.) FAX Operation 6 Used to print the confidential password. (Used when the confidential password is forgotten.) (Only when FAX is installed.) User data output, check FAX (display, print) Data 7 Used to print the image memory data (memory send, receive). User data output, check FAX (Only when FAX is installed.) (display, print) Data 8 Used to check the output operation of the FAX sound signals. (Sound output IC operation check) Send level Max. (Only when FAX is installed.) Operation test, check FAX Operation 9 Used to check the output operation of the FAX sound signals. (Sound output IC operation check) (Only when FAX is installed.) Operation test, check FAX Operation 10 Used to clear all data of image memory (memory send, receive). Confidential data are also cleared. (Only when FAX is installed.) User data output, check FAX (display, print) Data 11 Used to check the output operation of FAX G3 mode 300BPS. (Used to check the MODEM operation.) Send level 0dB (Max.) (Only when FAX is installed.) Operation test, check FAX Operation 12 Used to check the output operation of FAX G3 mode 300BPS. Operation test, check (Used to check the MODEM operation.) Signals are sent in the send level set with the soft switch. (Only when FAX is installed.) FAX Operation 13 Used to enter (set) the number for the FAX dial signal output test. (The dial number signal set with this simulation is outputted in the dial signal output test with SIM 66-14~16) (Only when FAX is installed.) Setup FAX Data 14 Used to set the make time in the FAX pulse dial mode (10PPS) Setup and to test the dial signal output. (The dial number signal set with SIM 66-13 is outputted.) Used to check dialing troubles and the operation. (Only when FAX is installed.) FAX Operation 15 Used to set the make time in the FAX pulse dial mode (20PPS) Setup and to test the dial signal output. (The dial number signal set with SIM 66-13 is outputted.) Used to check dialing troubles and the operation. (Only when FAX is installed.) FAX Operation 16 Used to test the dial signal (DTMF) output in the FAX tone dial Setup mode. (The dial number signal set with SIM 66-13 is outputted.) The send level can be set to an optional level. Dialing troubles and operation.(Only when FAX is installed.) FAX Operation 17 Used to test the dial signal (DTMF) output in the Fax tone dial mode. Send level Max. Used to check the operation. (Only when FAX is installed.) Setup FAX Operation 18 Used to test the dial signal (DTMF) in the FAX tone dial mode. Setup The send level set with the soft switch is outputted. Used to check the operation. (Only when FAX is installed.) FAX Operation 19 Used to backup the Address data into the flash Memory (Option FAX memory:AR-MM9) (Only when FAX is installed.) Setup FAX Operation 20 Used to restore the backup data (SIM 66-19) to Address data. (Only when FAX is installed.) Setup FAX Operation AR-FX12 SIMULATIONS, FAX SOFTWARE SWITCH 6-2 [06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 3 ページ Code 2004年10月26日 火曜日 午後3時44分 Function (Content) Purpose Section Item Main Sub 66 21 Used to print the FAX information (registrations, communication Adjustment, setup, management, file management, system errors, protocol). operation data output, (Only when FAX is installed.) check (display, print) FAX 23 Used to download the FAX program. (Only when FAX is installed.) Inhibited FAX 24 Used clear the FAST memory data. (Only when FAX is installed.) Inhibited FAX 25 Used to register the FAX number for MODEM dial-in. (Only when FAX is installed.) Inhibited FAX 26 Used to register the external telephone number for MODEM dial-in. (Only when FAX is installed.) Inhibited FAX 27 Used to register the voice-warp transfer number. (Only when FAX is installed.)(Voice-warp:Japan only) Inhibited FAX 29 Used to clear the Address data. Setup FAX 30 Used to check TEL/LIU status change. Setup FAX Operation 31 Used to set the TEL/LIU status. Setup FAX Operation 32 Used to check received data. Inhibited FAX 33 Used to check signal detection. Inhibited FAX Data Operation 34 Used to measure and display the communication time. Setup FAX Operation 35 Modem program rewriting.(Only when FAX is installed.) Operation test, check FAX Operation 36 Used to check I/F between MFPC and MDMC. Check is made in the data line or the command line. Operation test, check FAX Operation 39 Registration of FAX destination FAX 42 Used to rewrite the program to the PIC installed in the FAX box. To execute this simulation, FAX program writing must be allowed. (Jumper and DIP switch which differ depending on the model) FAX 43 To execute this simulation, FAX program writing must be allowed. (Jumper and DIP switch which differ depending on the model)The adjustment value of PIC are changed and written. The current setting is highlighted beside the item. FAX AR-FX12 SIMULATIONS, FAX SOFTWARE SWITCH 6-3 [06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 4 ページ 2004年10月26日 火曜日 午後3時44分 5. Detail of simulations 22-11 Main code 22 Purpose 22-5 Purpose Function (Content) Other Used to check the ROM version of each unit (section). Section Item Software Operation/Procedure The version of each ROM is displayed. SIMULATION 22-5 ROM VERSION DATA DISPLAY. S/N : 000000000 MFP : 1.00 (LANGUAGE : 1.00) PCU : 1.00 BOOT : SCANNER : 1.00 FAX : FINISHER : 1.00 SADDLE UNIT : 1.00 LCC : INSERTER : 1.00 SIMULATION 22-11 FAX COUNTER DATA DISPLAY. FAX SEND : ******** FAX RECEIVE : ******** FAX OUTPUT : ******** SEND IMAGES : ******** SEND TIME : ********:**:** RECEIVE TIME : ********:**:** 1.00 1.00 <List of display values> 1.00 FAX SEND FAX RECEIVE FAX OUTPUT SEND IMAGES SEND TIME RECEIVE TIME <List of display values> S/N MFP (LANGUAGE) BOOT FAX PCU SCANNER FINISHER SADDLE UNIT LCC INSERTER Adjustment, setup, operation data output, check (display) Function (Content) Used to check the use frequency of FAX. (send/receive) (Only when FAX is installed.) Section FAX Item Data Operation/Procedure The counter data below are displayed. Engine section serial number MFP controller (Language version) MFP controller boot ROM FAX controller PCU controller Scanner controller Finisher controller Saddle unit Side LCC Inserter Number of times of FAX sending Number of times of FAX receiving FAX print quantity Quantity of sending Time for sending Time for receiving 22-6 Purpose Function (Content) Adjustment, setup, operation data output, check (print) Used to print the list of adjustments and setup data (simulations, FAX soft switches, counters). Section Item Data Operation/Procedure The selected data is displayed on the right side of the item. SIMULATION 22-6 DATA PRINT MODE, SELECT SETTING,AND PRESS START. 0. TRAY SELECT :AUTO ONLY 1. PRINT START When "1" is selected, press [START] key. 1 Press [CUSTOM SETTINGS] key or [START] key SIMULATION 22-6 DATA PRINT MODE.. EXECUTING 0 <List of display values> 0 1 TRAY SELECT auto only (no selection) PRINT START AR-FX12 SIMULATIONS, FAX SOFTWARE SWITCH 6-4 [06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 5 ページ 2004年10月26日 火曜日 午後3時44分 Main code 23 Main code 24 23-2 24-10 Purpose Function (Content) Jam/Trouble data print Section Item Operation/Procedure The current selected data is displayed on the side of the menu. Purpose Function (Content) Section Item Operation/Procedure SIMULATION 23-2 JAM/TOROUBLE DATA PRINT MODE. SELECT SETTING, AND PRESS START. 0. TRAY SELECT :AUTO ONLY 1. PRINT START When "1" is selected, press [START] key 1 SIMULATION 24-10 FAX COUNTER DATA CLEAR. SELECT 1-6, AND PRESS START. 1. FAX SEND 2. FAX RECEIVED 3. FAX OUTPUT 4. SEND IMAGES 5. SEND TIME 6. RECEIVE TIME Press [CUSTOM SETTINGS] key or [START] key SIMULATION 23-2 JAM/TOROUBLE DATA PRINT MODE.. EXECUTING . 0.TRAY SELECT :1 1 0 Press [START] key. <List of display values> 0 1 Data clear Used to clear the FAX counter. FAX Counter Select with 10 digit key pad and press START key. The procedure below is executed and the display returns to the original state. 1: Counter is cleared 2: Not cleared TRAY SELECT (Selection disabled) PRINT START Press [CUSTOM SETTINGS] key or [START] key SIMULATION 24-10 FAX SEND COUNTER DATA CLEAR. ARE YOU SURE? 1. YES 2. NO <List of set values> 1 2 3 4 5 6 FAX SEND: Number of times of FAX sending FAX RECEIVE: Number of times of FAX reception FAX OUTPUT: FAX print quantity SEND IMAGES: Sending quantity SEND TIME: Time for sending RECEIVE TIME: Time for reception AR-FX12 SIMULATIONS, FAX SOFTWARE SWITCH 6-5 1 [06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 6 ページ 2004年10月26日 火曜日 午後3時44分 <List of set values 1> 0 1 2 Main code 46 46-12 Purpose Function (Content) Adjustment Used to adjust the print density in the FAX mode (all modes). An adjustment with this simulation affects all the reading density adjustment values. (Only when FAX is installed) Section Item Picture quality Operation/Procedure The exposure mode to be set is selected. (FAX auto adjustment) 1) The current set value is highlighted on the right side of each item. In this screen, be sure to select "1: COPY START." (Set value: 1) 2) Set the exposure level with 10 digit key pad. Press P to store the set value. (Default: 50, set range: 0 - 99) 3) Press START, and copying is started and the set value is stored. (Display value 1) 4) Select a paper feed tray. (Set value 2) Paper feed tray selection Copy start (Default) FAX mode exposure setup <List of display values 1> Normal display ERROR display “NOW PRINTING” DOOR OPEN. JAM PAPER EMPTY. <List of set values 2> 1 2 3 4 5 TRAY1 TRAY2 TRAY3 TRAY4 Manual feed SIMULATION 46-12 EXP. LEVEL SETUP FAX (AUTO SET). SELECT 0-2, AND PRESS START. 0. TRAY SELECT 1. COPY START 1 2. FAX EXP. LEVEL 50 1 Select other than 0 - 1, and press [START] key. Press [CUSTOM SETTINGS] key SIMULATION 46-12 EXP. LEVEL SETUP FAX (AUTO SET),INPUT VALUE 0-99, AND PRESS START. 2. FAX EXP. LEVEL 50 Select 1, and press [START] key. Press [START] key. Press [CUSTOM SETTINGS] key Or copying is terminated. SIMULATION 46-12 EXP. LEVEL SETUP FAX (AUTO SET). NOW PRINTING. Select 0, and press [START] key. Press [START] key or Press [CUSTOM SETTINGS] key SIMULATION 46-12 EXP. LEVEL SETUP FAX (AUTO SET). SELECT 1-5, AND PRESS START. (FEED TRAY) 1. TRAY1 2. TRAY2 3. TRAY3 4. TRAY4 5.BPT 1 AR-FX12 SIMULATIONS, FAX SOFTWARE SWITCH 6-6 [06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 7 ページ 2004年10月26日 火曜日 午後3時44分 <List of set values 1> 46-13 Purpose Function (Content) Adjustment Used to adjust the reading density in the FAX mode (Standard mode). (Only when FAX is installed.) Section Item Picture quality Operation/Procedure The exposure mode to be set is selected. (FAX Standard mode individual adjustment) 1) The current set value is highlighted on the right side of each item. In this screen, be sure to select "1: PRINT START." (Set value: 1) 2) Set the exposure level with 10 digit key pad. Press P to store the set value. (Default: 50, set range: 0 - 99) 3) Press START, and copying is started and the set value is stored. (Display value 1) 4) Select a paper feed tray. (Set value 2) 5) Select an exposure level. (Set value 3) SIMULATION 46-13 EXP. LEVEL SETUP FAX(NORMAL). SELECT 0-8, AND PRESS START. 1 0. TRAY SELECT 1. PRINT START 1 2. EXP LEVEL 50 50 50 3. AUTO 4. 1.0 5. 2.0 6. 3.0 7. 4.0 8. 5.0 50 50 50 1 Select other than 0 - 2, and press [START] key. Press [CUSTOM SETTINGS] key SIMULATION 46-13 EXP. LEVEL SETUP FAX(NORMAL),INPUT VALUE 0-99, AND PRESS START. 4. 1.0 50 Select 1, and press [START] key. 0 1 2 3 4 5 6 7 8 Paper feed tray selection Print start (Default) Exposure level selection Auto Exposure level 1 Exposure level 2 Exposure level 3 Exposure level 4 Exposure level 5 <List of display values 1> Normal display ERROR display “NOW PRINTING” DOOR OPEN. JAM PAPER EMPTY. <List of set values 2> 1 2 3 4 5 TRAY1 TRAY2 TRAY3 TRAY4 Manual feed For the above +20, the machine enters the duplex mode (DS), making duplex copy. <List of set values 3> 3 4 5 6 7 8 Auto Exposure level 1 Exposure level 2 Exposure level 3 Exposure level 4 Exposure level 5 Press [START] key. Press [CUSTOM SETTINGS] key Or copying is terminated. SIMULATION 46-13 EXP. LEVEL SETUP FAX(NORMAL). NOW PRINTING. Select 0, and press [START] key. Press [START] key or Press [CUSTOM SETTINGS] key SIMULATION 46-13 EXP. LEVEL SETUP FAX(NORMAL). SELECT 1-5, AND PRESS START. (FEED TRAY) 1. TRAY1 2. TRAY2 3. TRAY3 4. TRAY4 5. BPT (ABOVE +20: DSPF MODE) 1 Select 2, and press [START] key. Press [START] key or Press [CUSTOM SETTINGS] key SIMULATION 46-13 EXP. LEVEL SETUP FAX(NORMAL). SELECT 3-8, AND PRESS START. (EXP. LEVEL SELECT) 3. AUTO 4. 1.0 5. 2.0 6. 3.0 7. 4.0 8. 5.0 1 AR-FX12 SIMULATIONS, FAX SOFTWARE SWITCH 6-7 [06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 8 ページ 2004年10月26日 火曜日 午後3時44分 <List of set values 1> 46-14 Purpose Function (Content) Adjustment Used to adjust the reading density in the FAX mode (Fine mode). (Only when FAX is installed.) Section Item Picture quality Operation/Procedure The exposure mode to be set is selected. (FAX Fine mode individual adjustment) 1) The current set value is highlighted on the right side of each item. In this screen, be sure to select "1: PRINT START." (Set value: 1) 2) Set the exposure level with 10 digit key pad. Press P to store the set value. (Default: 50, set range: 0 - 99) 3) Press START, and copying is started and the set value is stored. (Display value 1) 4) Select a paper feed tray. (Set value 2) 5) Select an exposure level. (Set value 3) SIMULATION 46-14 EXP. LEVEL SETUP FAX(FINE). SELECT 0-14, AND PRESS START. 1 0. TRAY SELECT 1. PRINT START 1 2. EXP LEVEL 50 50 50 3. AUTO 4. 1.0 5. 2.0 50 50 50 6. 3.0 7. 4.0 8. 5.0 50 9. AUTO(H) 50 10. 1.0(H) 11. 2.0(H) 50 12. 3.0(H) 13. 4.0(H) 14. 5.0(H) 50 50 50 Select other than 0 - 2, and press [START] key. 1 Press [CUSTOM SETTINGS] key. SIMULATION 46-14 EXP. LEVEL SETUP FAX(FINE),INPUT VALUE 0-99, AND PRESS START. 4. 1.0 50 Select 1, and press [START] key. Press [START] key. Press [CUSTOM SETTINGS] key. Or copying is terminated. SIMULATION 46-14 EXP. LEVEL SETUP FAX(FINE). NOW PRINTING. Select 0, and press [START] key. Press [START] key or press [CUSTOME SETTINGS] key. SIMULATION 46-14 EXP. LEVEL SETUP FAX(FINE). SELECT 1-5, AND PRESS START. (FEED TRAY) 1. TRAY1 2. TRAY2 3. TRAY3 4. TRAY4 5. BPT Select 2, and press [START] key. 1 0 Paper feed selection 1 Print start (Default) 2 Exposure level selection 3 Auto 4 Exposure level 1 5 Exposure level 2 6 Exposure level 3 7 Exposure level 4 8 Exposure level 5 <Half tone> 9 Auto 10 Exposure level 1 11 Exposure level 2 12 Exposure level 3 13 Exposure level 4 14 Exposure level 5 <List of display values 1> Normal display ERROR display “NOW PRINTING” DOOR OPEN. JAM PAPER EMPTY. <List of set values 2> 1 2 3 4 5 TRAY1 TRAY2 TRAY3 TRAY4 Manual feed <List of set values 3> 3 Auto 4 Exposure level 1 5 Exposure level 2 6 Exposure level 3 7 Exposure level 4 8 Exposure level 5 <Half tone> 9 Auto 10 Exposure level 1 11 Exposure level 2 12 Exposure level 3 13 Exposure level 4 14 Exposure level 5 Press [START] key or press [CUSTOME SETTINGS] key. SIMULATION 46-14 EXP. LEVEL SETUP FAX(FINE). SELECT 3-14, AND PRESS START. (EXP. LEVEL SELECT) 3. AUTO 4. 1.0 5. 2.0 6. 3.0 7. 4.0 8. 5.0 9. AUTO(H) 10. 1.0(H) 11. 2.0(H) 12. 3.0(H) 13. 4.0(H) 14. 5.0(H) 1 AR-FX12 SIMULATIONS, FAX SOFTWARE SWITCH 6-8 [06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 9 ページ 2004年10月26日 火曜日 午後3時44分 <List of set values 1> 46-15 Purpose Function (Content) Adjustment Used to adjust the reading density in the FAX mode (Super Fine mode). (Only when FAX is installed.) Section Item Picture quality Operation/Procedure The exposure mode to be set is selected. (FAX Super Fine mode individual adjustment) 1) The current set value is highlighted on the right side of each item. In this screen, be sure to select "1: PRINT START." (Set value: 1) 2) Set the exposure level with 10 digit key pad. Press P to store the set value. (Default: 50, set range: 0 - 99) 3) Press START, and copying is started and the set value is stored. (Display value 1) 4) Select a paper feed tray. (Set value 2) 5) Select an exposure level. (Set value 3) SIMULATION 46-15 EXP. LEVEL SETUP FAX(SUPER FINE). SELECT 0-14, AND PRESS START. 1 0. TRAY SELECT 1. PRINT START 1 2. EXP LEVEL 50 50 50 3. AUTO 4. 1.0 5. 2.0 50 50 50 6. 3.0 7. 4.0 8. 5.0 50 9. AUTO(H) 50 10. 1.0(H) 11. 2.0(H) 50 12. 3.0(H) 13. 4.0(H) 14. 5.0(H) 50 50 50 1 Select other than 0 - 2, and press [START] key. Press [CUSTOM SETTINGS] key. SIMULATION 46-15 EXP. LEVEL SETUP FAX(SUPER FINE),INPUT VALUE 0-99, AND PRESS START. 2. AUTO 50 Select 1, and press [START] key. Press [START] key. Press [CUSTOM SETTINGS] key. Or copying is terminated. SIMULATION 46-15 EXP. LEVEL SETUP FAX(SUPER FINE). NOW PRINTING. Select 0, and press [START] key. Press [START] key or press [CUSTOME SETTINGS] key. SIMULATION 46-15 EXP. LEVEL SETUP FAX(SUPER FINE). SELECT 1-5, AND PRESS START. (FEED TRAY) 1. TRAY1 2. TRAY2 3. TRAY3 4. TRAY4 5. BPT 1 Select 2, and press [START] key. 0 Paper feed tray selection 1 Print start (Default) 2 Exposure level selection 3 Auto 4 Exposure level 1 5 Exposure level 2 6 Exposure level 3 7 Exposure level 4 8 Exposure level 5 <Half tone> 9 Auto 10 Exposure level 1 11 Exposure level 2 12 Exposure level 3 13 Exposure level 4 14 Exposure level 5 <List of display values 1> Normal display ERROR display “NOW PRINTING” DOOR OPEN. JAM PAPER EMPTY. <List of set values 2> 1 2 3 4 5 TRAY1 TRAY2 TRAY3 TRAY4 Manual feed <List of set values 3> 3 Auto 4 Exposure level 1 5 Exposure level 2 6 Exposure level 3 7 Exposure level 4 8 Exposure level 5 <Half tone> 9 Auto 10 Exposure level 1 11 Exposure level 2 12 Exposure level 3 13 Exposure level 4 14 Exposure level 5 Press [START] key or press [CUSTOME SETTINGS] key. SIMULATION 46-15 EXP. LEVEL SETUP FAX(SUPER FINE). SELECT 3-14, AND PRESS START. (EXP. LEVEL SELECT) 3. AUTO 4. 1.0 5. 2.0 6. 3.0 7. 4.0 8. 5.0 9. AUTO(H) 10. 1.0(H) 11. 2.0(H) 12. 3.0(H) 13. 4.0(H) 14. 5.0(H) 1 AR-FX12 SIMULATIONS, FAX SOFTWARE SWITCH 6-9 [06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 10 ページ 2004年10月26日 火曜日 午後3時44分 <List of set values 1> 46-16 Purpose Function (Content) Adjustment Used to adjust the reading density in the FAX mode (Ultra Fine mode). (Only when FAX is installed.) Section Item Picture quality Operation/Procedure The exposure mode to be set is selected. (FAX Ultra Fine mode individual adjustment) 1) The current set value is highlighted on the right side of each item. In this screen, be sure to select "1: PRINT START." (Set value: 1) 2) Set the exposure level with 10 digit key pad. Press P to store the set value. (Default: 50, set range: 0 - 99) 3) Press START, and copying is started and the set value is stored. (Display value 1) 4) Select a paper feed tray. (Set value 2) 5) Select an exposure level. (Set value 3) SIMULATION 46-16 EXP. LEVEL SETUP FAX(ULTRA FINE). SELECT 0-14, AND PRESS START. 1 1. PRINT START 0. TRAY SELECT 2. EXP LEVEL 1 50 50 50 3. AUTO 4. 1.0 5. 2.0 50 50 50 6. 3.0 7. 4.0 8. 5.0 50 9. AUTO(H) 50 10. 1.0(H) 11. 2.0(H) 50 12. 3.0(H) 13. 4.0(H) 14. 5.0(H) 50 50 50 1 Select other than 0 - 2, and press [START] key. 0 Paper feed tray selection 1 Print start (Default) 2 Exposure level selection 3 Auto 4 Exposure level 1 5 Exposure level 2 6 Exposure level 3 7 Exposure level 4 8 Exposure level 5 <Half tone> 9 Auto 10 Exposure level 1 11 Exposure level 2 12 Exposure level 3 13 Exposure level 4 14 Exposure level 5 <List of display values 1> Normal display ERROR display “NOW PRINTING” DOOR OPEN. JAM PAPER EMPTY. <List of set values 2> 1 2 3 4 5 TRAY1 TRAY2 TRAY3 TRAY4 Manual feed Press [CUSTOM SETTINGS] key. <List of set values 3> SIMULATION 46-16 EXP. LEVEL SETUP FAX(ULTRA FINE),INPUT VALUE 0-99, AND PRESS START. 2. AUTO 50 Select 1, and press [START] key. Press [START] key. Press [CUSTOM SETTINGS] key. Or copying is terminated. SIMULATION 46-16 EXP. LEVEL SETUP FAX(ULTRA FINE). NOW PRINTING. Select 0, and press [START] key. Press [START] key or press [CUSTOME SETTINGS] key. SIMULATION 46-16 EXP. LEVEL SETUP FAX(ULTRA FINE). SELECT 1-5, AND PRESS START. (FEED TRAY) 1. TRAY1 2. TRAY2 3. TRAY3 4. TRAY4 5. BPT 3 Auto 4 Exposure level 1 5 Exposure level 2 6 Exposure level 3 7 Exposure level 4 8 Exposure level 5 <Half tone> 9 Auto 10 Exposure level 1 11 Exposure level 2 12 Exposure level 3 13 Exposure level 4 14 Exposure level 5 1 Select 2, and press [START] key. Press [START] key or press [CUSTOME SETTINGS] key. SIMULATION 46-16 EXP. LEVEL SETUP FAX(ULTRA FINE). SELECT 3-14, AND PRESS START. (EXP. LEVEL SELECT) 3. AUTO 4. 1.0 5. 2.0 6. 3.0 7. 4.0 8. 5.0 9. AUTO(H) 10. 1.0(H) 11. 2.0(H) 12. 3.0(H) 13. 4.0(H) 14. 5.0(H) 1 AR-FX12 SIMULATIONS, FAX SOFTWARE SWITCH 6-10 [06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 11 ページ 2004年10月26日 火曜日 午後3時44分 Main code 56 Main code 61 56-1 61-3 Purpose Function (Content) Data transfer Section Item Operation/Procedure Used to perform data transfer. Select an item with 10 digit key pad and press START key. The following operation is performed and the display returns to the original state. 1. Data transfer executed 2. Data transfer not executed Purpose Function (Content) SIMULATION 56-1 DATA COPY. SELECT 1 - 7, AND PRESS START. 1.ALL(EEPROM,SRAM,FlashROM) HDD 2.HDD ALL(EEPROM,SRAM,FlashROM) 3.EEPROM HDD 4.HDD EEPROM 5.SRAM(+FAX Memory, +Option Memory) HDD 6.HDD SRAM(+FAX Memory, +Option Memory) 7.FontROM HDD press [START] key Adjustment Used to adjust the scanner (exposure) laser power (absolute value) in the FAX reception mode. (Only when FAX is installed.) Section PCU Item Operation Operation/Procedure Set the laser power in FAX operation. Enter the set value and press START to store it. Set range: 1 ~ 165 Default : (45PPM) 104 (35PPM) 88 SIMULATION 61-3 LASER POWER SETTING (FAX). PRESS START. 1. FAX 5 1 1 Press [CUSTOM SETTINGS] key or [START] key. Press [START] key. SIMULATION 61-3 LASER POWER SETTING (FAX). INPUT VALUE 67-150, AND PRESS START. 1. FAX Press [CUSTOM SETTINGS] key 5 or [START] key SIMULATION 56-1 EEPROM HDD DATA COPY. ARE YOU SURE? 1. YES 2. NO <List of set values> Initial value 1 FAX reception 1 45PPM 104 35PPM 88 Set range 1 ~ 165 <List of display values> 1* 2* 3 4 5* 6* 7 All memory contents are transferred to HDD. (Same operation as 3.5.) The contents of HDD are transferred to all memory. (Same operation as 4.6.) Transfer from EEPROM to HDD Transfer from HDD to EEPROM Transfer from SRAM to HDD.If, however, a FAX memory or an option memory (for FAX) is installed, the contents of the FAX memory are also transferred to HDD. Transfer from HDD to SRAM. If, however, a FAX memory or an option memory (for FAX) is installed, the contents of the FAX memory are also transferred as well as the contents of HDD. Transfer from Font Rom to HDD> * : When the Flash ROM and the OP.Flash ROM are not installed, transfer is not executed. Main code 66 66-1 Purpose Function (Content) Setup Used to set the FAX soft switch function. (Used to utilize the FAX soft switch function.) FAX Section Item Operation/Procedure Set the Fax soft switch. (For details of the soft SW, refer to the AR-FX12 Specifications.) SW1 cannot be changed with this simulation. Entry of 1 - 8 only is effective. 1) Specify the bit to be changed (highlighted) with a number. 2) Press START to rewrite the setting. * SIM 1 cannot be changed with this simulation. SIMULATION 66-1 FAX SOFT SW. SETTING. SELECT 2 - 120, AND PRESS START. 1 Press [START] key. Press [CUSTOM SETTINGS] key or [START] key. SIMULATION 66-1 FAX SOFT SW. SETTING. INPUT DATA No(1-8), AND PRESS START. SOFT SW-2: 1 2 3 4 5 6 7 8 00001001 AR-FX12 SIMULATIONS, FAX SOFTWARE SWITCH 6-11 [06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 12 ページ 2004年10月26日 火曜日 午後3時44分 66-2 66-3 Purpose Function (Content) Purpose Function (Content) Data clear Used to set the FAX soft switch setup to the default. (Except for the adjustment values) Section FAX Item Data Operation/Procedure The current set value of SW1 is displayed. Entry of 1 ~ 8 is effective. 1) Specify the bit to be changed (highlighted) with a number. 2) Select the country code, and press START to rewrite the setting. For the country code, refer to the table below. An entry other than the specified codes is accepted as Japan. * Conforms to Recommendations T.35. 3) Select a number with 10 digit key pad and press START key to execute. 4) The soft switch (excluding the FAX adjustment value) corresponding to the selected country code is cleared. 1: FAX soft SW clear 2: Not clear 5) The selected country is highlighted. SIMULATION 66-2 FAX SOFT SW.CLEAR (WIHTOUT ADJUSTMENT VALUE). INPUT COUNTRY CODE, AND PRESS START. 1 2 3 4 5 6 7 8 00000000 Press [CUSTOM SETTINGS] key. 1 JAPAN 1:YES 2:NO <Country codes> * 1 In repeat, the number of repeat is displayed in a four-digit decimal number as "CHECKING 0001." When 9999 is exceeded, the number returns to 0000. (A space is placed between CHECKING and the number.) SIMULATION 66-2 FAX SOFT SW. CLEAR. ARE YOU SURE? 1 SIMULATION 66-3 FAX PWB MEMORY CHECK. INPUT 1-13, AND PRESS START. 1. All Memory Device Check (once) 2. MFP SRAM (once) 3. MFP SRAM (repeat) 4. MFP FLASH + OP FLASH (once) 5. MFP FLASH + OP FLASH (repeat) 6. MODEM EEPROM (once) 7. MODEM EEPROM (repeat) 8. MODEM SRAM(G/A) (once) 9. MODEM SRAM(G/A) (repeat) 10. MODEM SDRAM1 (once) 11. MODEM SDRAM1 (repeat) 12. MODEM SDRAM2 (once) 13. MODEM SDRAM2 (repeat) Press [START] key. Press [START] key. U.S.A Operation test, check Used to check the operations of FAX PWB memory (read/write). (This adjustment is required when replacing the PWB with a new one.) Section FAX Item Data Operation/Procedure Select an item and press START key to execute. The display goes to the next menu. When "1. All Memory Device Check" is selected, all memory devices are checked only once. The error occurring address or the data line is displayed for each item. When an item with "repeat" is selected, the result is displayed as "NG" or execution is continued until [CUSTOM SETTINGS]) or ([CA] key) is pressed. 0 1 1 0 1 0 1 SIMULATION 66-3 FAX PWB MEMORY CHECK. MFP SRAM: CHECKING MFP FLASH: NO CHECK NO CHECK MODEM EEPROM: NG:A0010000 MODEM SDRAM2(G/A):NO CHECK MODEM CASRAM: NG A11 MODEM SDRAM1: OK The selected number is displayed. 1 Conforms to Advisory Document T.35. When check is "repeat" and [CUSTOM SETTINGS] key is pressed. When Check is "once," the display stops at the report display. When [CUSTM SETTING] key pressed, the display returns to the selection menu of 1 ~ 13. <List of display values> NO CHECK CHECKING OK NG Not checked Checking Check complete OK Check error <Items> MFP SRAM (MFP control PWB) MFP FLASH (FAX I/F PWB) MFP OP.FLASH (FAX I/F PWB) MODEM EEPROM (FAX PWB) MODEM SRAM(G/A) (FAX PWB) MODEM SDRAM1 (FAX PWB) MODEM SDRAM 2(FAX PWB) AR-FX12 SIMULATIONS, FAX SOFTWARE SWITCH 6-12 SRAM FLASH Memory FLASH Memory (AR-MM9) [06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 13 ページ 2004年10月26日 火曜日 午後3時44分 <List of set values> 66-4 Purpose Function (Content) Operation test, check Used to check the operations of data signal output in the FAX data output mode. (Used to check the MODEM operation.) Send level 0db (Max.) (Only when FAX is installed.) Section FAX Item Operation Operation/Procedure Signal output check (level Max.) When CUSTOM SETTING is pressed during execution of this simulation, execution is stopped. Enter a number and press START to change the kind of signal. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 No signal 26.4 V34 31.2 V34 28.8 V34 26.4 V34 24.0 V34 21.6 V34 19.2 V34 16.8 V34 14.4 V34 12.0 V34 9.6 V34 7.2 V34 4.8 V34 2.4 V34 14.4 V33 SIMULATION 66-4 SIGNAL OUTPUT CHECK.(LEVEL MAX) SELECT 1-32, AND PRESS START. 1.NOSIGNAL 2.33.6 V34 3.31.2 V34 4.28.8 V34 5.26.4 V34 6.24.0 V34 7.21.6 V34 8.19.2 V34 9.16.8 V34 10.14.4 V34 11.12.0 V34 12.9.6 V34 13.7.2 V34 14.4.8 V34 15.2.4 V34 16.14.4 V33 17.12.0 V33 18.14.4 V17 19.12.0 V17 20.9.6 V17 21.7.2 V17 22.9.6 V29 23.7.2 V29 24.4.8 V27t 25.2.4 V27t 26.0.3 FLG 27.CED 2100 28.CNG 1100 29.0.3 V21 30.ANSam 31.RINGER 32.No RBT 1 Press [START] key. Press [CUSTOM SETTINGS] key. SIMULATION 66-4 SIGNAL OUTPUT CHECK.(LEVEL MAX) SELECT 1-32, AND PRESS START. EXECUTING... 1.NOSIGNAL 2.33.6 V34 3.31.2 V34 4.28.8 V34 5.26.4 V34 6.24.0 V34 7.21.6 V34 8.19.2 V34 9.16.8 V34 10.14.4 V34 11.12.0 V34 12.9.6 V34 13.7.2 V34 14.4.8 V34 15.2.4 V34 16.14.4 V33 17.12.0 V33 18.14.4 V17 19.12.0 V17 20.9.6 V17 21.7.2 V17 22.9.6 V29 23.7.2 V29 24.4.8 V27t 25.2.4 V27t 26.0.3 FLG 27.CED 2100 28.CNG 1100 29.0.3 V21 30.ANSam 31.RINGER 32.No RBT 1 Same display Select 2 and press [START] key. SIMULATION 66-4 SIGNAL OUTPUT CHECK.(LEVEL MAX) SELECT 1-32, AND PRESS START. EXECUTING... 1.NOSIGNAL 2.33.6 V34 3.31.2 V34 4.28.8 V34 5.26.4 V34 6.24.0 V34 7.21.6 V34 8.19.2 V34 9.16.8 V34 10.14.4 V34 11.12.0 V34 12.9.6 V34 13.7.2 V34 14.4.8 V34 15.2.4 V34 16.14.4 V33 17.12.0 V33 18.14.4 V17 19.12.0 V17 20.9.6 V17 21.7.2 V17 22.9.6 V29 23.7.2 V29 24.4.8 V27t 25.2.4 V27t 26.0.3 FLG 27.CED 2100 28.CNG 1100 29.0.3 V21 30.ANSam 31.RINGER 32.No RBT 2 Press [CUSTOM SETTINGS] key. SIMULATION 66-4 SIGNAL OUTPUT CHECK.(LEVEL MAX) SELECT 1-32, AND PRESS START. 1.NOSIGNAL 2.33.6 V34 3.31.2 V34 4.28.8 V34 5.26.4 V34 6.24.0 V34 7.21.6 V34 8.19.2 V34 9.16.8 V34 10.14.4 V34 11.12.0 V34 12.9.6 V34 13.7.2 V34 14.4.8 V34 15.2.4 V34 16.14.4 V33 17.12.0 V33 18.14.4 V17 19.12.0 V17 20.9.6 V17 21.7.2 V17 22.9.6 V29 23.7.2 V29 24.4.8 V27t 25.2.4 V27t 26.0.3 FLG 27.CED 2100 28.CNG 1100 29.0.3 V21 30.ANSam 31.RINGER 32.No RBT 2 AR-FX12 SIMULATIONS, FAX SOFTWARE SWITCH 6-13 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 12.0 V33 14.4 V17 12.0 V17 9.6 V17 7.2 V17 9.6 V29 7.2 V29 4.8 V27t 2.4 V27t 0.3 FLG CED2100 CNG1100 0.3 V21 ANSam RINGER No RBT [06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 14 ページ 2004年10月26日 火曜日 午後3時44分 <List of set values> 66-5 Purpose Function (Content) Operation test, check Used to check the operations of data signal output in the FAX data output mode. (Used to check the MODEM operation.) Signals are sent in the send level set with the soft switch. (Only when FAX is installed.) Section FAX Item Operation Operation/Procedure Signal output check (Send level is set with the soft SW.) When CUSTOM SETTING is pressed during execution of this simulation, execution is stopped. Enter a number and press START to change the kind of signal. SIMULATION 66-5 SIGNAL OUTPUT CHECK.(SOFT SW.) SELECT 1-32, AND PRESS START. 1.NOSIGNAL 2.33.6 V34 3.31.2 V34 4.28.8 V34 5.26.4 V34 6.24.0 V34 7.21.6 V34 8.19.2 V34 9.16.8 V34 10.14.4 V34 11.12.0 V34 12.9.6 V34 13.7.2 V34 14.4.8 V34 15.2.4 V34 16.14.4 V33 17.12.0 V33 18.14.4 V17 19.12.0 V17 20.9.6 V17 21.7.2 V17 22.9.6 V29 23.7.2 V29 24.4.8 V27t 25.2.4 V27t 26.0.3 FLG 27.CED 2100 28.CNG 1100 29.0.3 V21 30.ANSam 31.RINGER 32.No RBT 1 Press [START] key. Press [CUSTOM SETTINGS] key. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 Purpose Function (Content) User data output, check (display, print) Used to print the confidential pass code. (Used when the confidential pass code is forgotten.) (Only when FAX is installed.) Section FAX Item Data Operation/Procedure The confidential pass code is printed. The currently selected data is displayed on the side of menu. Paper is automatically selected with the size stored in the image memory. SIMULATION 66-5 SIGNAL OUTPUT CHECK.(SOFT SW.) SELECT 1-32, AND PRESS START. EXECUTING... 1.NOSIGNAL 2.33.6 V34 3.31.2 V34 4.28.8 V34 5.26.4 V34 6.24.0 V34 7.21.6 V34 8.19.2 V34 9.16.8 V34 10.14.4 V34 11.12.0 V34 12.9.6 V34 13.7.2 V34 14.4.8 V34 15.2.4 V34 16.14.4 V33 17.12.0 V33 18.14.4 V17 19.12.0 V17 20.9.6 V17 21.7.2 V17 22.9.6 V29 23.7.2 V29 24.4.8 V27t 25.2.4 V27t 26.0.3 FLG 27.CED 2100 28.CNG 1100 29.0.3 V21 30.ANSam 31.RINGER 32.No RBT SIMULATION 66-6 PASS CODE PRINT OUT. PRESS START. 1. PRINT START Enter 1 and press [START] key. When there is no print data, the display return to the original state without printing. (When 1) Select 2 and press [START] key. SIMULATION 66-5 SIGNAL OUTPUT CHECK.(SOFT SW.) SELECT 1-32, AND PRESS START. EXECUTING... 1.NOSIGNAL 2.33.6 V34 3.31.2 V34 4.28.8 V34 5.26.4 V34 6.24.0 V34 7.21.6 V34 8.19.2 V34 9.16.8 V34 10.14.4 V34 11.12.0 V34 12.9.6 V34 13.7.2 V34 14.4.8 V34 15.2.4 V34 16.14.4 V33 17.12.0 V33 18.14.4 V17 19.12.0 V17 20.9.6 V17 21.7.2 V17 22.9.6 V29 23.7.2 V29 24.4.8 V27t 25.2.4 V27t 26.0.3 FLG 27.CED 2100 28.CNG 1100 29.0.3 V21 30.ANSam 31.RINGER 32.No RBT 12.0 V33 14.4 V17 12.0 V17 9.6 V17 7.2 V17 9.6 V29 7.2 V29 4.8 V27t 2.4 V27t 0.3 FLG CED2100 CNG1100 0.3 V21 ANSam RINGER No RBT 66-6 1 Same display No signal 26.4 V34 31.2 V34 28.8 V34 26.4 V34 24.0 V34 21.6 V34 19.2 V34 16.8 V34 14.4 V34 12.0 V34 9.6 V34 7.2 V34 4.8 V34 2.4 V34 14.4 V33 SIMULATION 66-6 PASS CODE PRINT OUT.EXECUTING... 1. PRINT START After completion of printing 2 <Set value> 1 Print start Press [CUSTOM SETTINGS] key. SIMULATION 66-5 SIGNAL OUTPUT CHECK.(SOFT SW.) SELECT 1-32, AND PRESS START. 1.NOSIGNAL 2.33.6 V34 3.31.2 V34 4.28.8 V34 5.26.4 V34 6.24.0 V34 7.21.6 V34 8.19.2 V34 9.16.8 V34 10.14.4 V34 11.12.0 V34 12.9.6 V34 13.7.2 V34 14.4.8 V34 15.2.4 V34 16.14.4 V33 17.12.0 V33 18.14.4 V17 19.12.0 V17 20.9.6 V17 21.7.2 V17 22.9.6 V29 23.7.2 V29 24.4.8 V27t 25.2.4 V27t 26.0.3 FLG 27.CED 2100 28.CNG 1100 29.0.3 V21 30.ANSam 31.RINGER 32.No RBT 2 AR-FX12 SIMULATIONS, FAX SOFTWARE SWITCH 6-14 0 [06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 15 ページ 2004年10月26日 火曜日 午後3時44分 SIMULATION 66-8 MESSAGE OUTPUT CHECK.(LEVEL MAX) SELECT 1-20, AND PRESS START. 1.NONE 2.PAUSE 3.MESSAGE1 4.MESSAGE2 5.MESSAGE3 6.MESSAGE4 7.MESSAGE5 8.MESSAGE6 9.MESSAGE7 10.MESSAGE8 11.MESSAGE9 12.MESSAGE10 13.MESSAGE11 14.MESSAGE12 15.MESSAGE13 16.MESSAGE14 17.MESSAGE15 18.ALARM 19.RINGER 20.EXT.TEL.RINGER 66-7 Purpose Function (Content) User data output, check (display, print) Used to print the image memory data (memory send, receive). (Only when FAX is installed. Section FAX Item Data Operation/Procedure The content of image memory is printed. The paper size is automatically selected with the paper size stored in the image memory. SIMULATION 66-7 IMAGE MEMORY PRINT OUT.PRESS START. 1. PRINT START Select 1 and press [START] key. Press [CUSTOM SETTINGS] key. 0 Same display Select 1 and press [START] key. (When 1 is selected) SIMULATION 66-8 MESSAGE OUTPUT CHECK.(LEVEL MAX) SELECT 1-20, AND PRESS START.EXECUTING... 1.NONE 2.PAUSE 3.MESSAGE1 4.MESSAGE2 5.MESSAGE3 6.MESSAGE4 7.MESSAGE5 8.MESSAGE6 9.MESSAGE7 10.MESSAGE8 11.MESSAGE9 12.MESSAGE10 13.MESSAGE11 14.MESSAGE12 15.MESSAGE13 16.MESSAGE14 17.MESSAGE15 18.ALARM 19.RINGER 20.EXT.TEL.RINGER 1 Select 2 and press [START] key. SIMULATION 66-7 IMAGE MEMORY PRINT OUT.EXECUTING... 1. PRINT START SIMULATION 66-8 MESSAGE OUTPUT CHECK.(LEVEL MAX) SELECT 1-20, AND PRESS START.EXECUTING... 1.NONE 2.PAUSE 3.MESSAGE1 4.MESSAGE2 5.MESSAGE3 6.MESSAGE4 7.MESSAGE5 8.MESSAGE6 9.MESSAGE7 10.MESSAGE8 11.MESSAGE9 12.MESSAGE10 13.MESSAGE11 14.MESSAGE12 15.MESSAGE13 16.MESSAGE14 17.MESSAGE15 18.ALARM 19.RINGER 20.EXT.TEL.RINGER After completion of printing <Set value> 1 2 Print start 2 Press [CUSTOM SETTINGS] key. 66-8 Purpose Function (Content) Operation test, check Used to check the output operation of the FAX sound signals. (Sound output IC operation check) Send level Max. (Only when FAX is installed.) Section FAX Item Operation Operation/Procedure A voice message is outputted. (Level Max.) Enter a number during execution to change the kind of signal. Press START to start sending a voice message. Press CUSTOM SETTINGS to terminate. SIMULATION 66-8 MESSAGE OUTPUT CHECK.(LEVEL MAX) SELECT 1-20, AND PRESS START. 1.NONE 2.PAUSE 3.MESSAGE1 4.MESSAGE2 5.MESSAGE3 6.MESSAGE4 7.MESSAGE5 8.MESSAGE6 9.MESSAGE7 10.MESSAGE8 11.MESSAGE9 12.MESSAGE10 13.MESSAGE11 14.MESSAGE12 15.MESSAGE13 16.MESSAGE14 17.MESSAGE15 18.ALARM 19.RINGER 20.EXT.TEL.RINGER <List of set values> 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 NONE PAUSE MESSAGE1 MESSAGE2 MESSAGE3 MESSAGE4 MESSAGE5 MESSAGE6 MESSAGE7 MESSAGE8 MESSAGE9 MESSAGE10 MESSAGE11 MESSAGE12 MESSAGE13 MESSAGE14 MESSAGE15 ALARM RINGER EXT.TEL.RINGER AR-FX12 SIMULATIONS, FAX SOFTWARE SWITCH 6-15 NONE PAUSE MESSAGE1 MESSAGE2 MESSAGE3 MESSAGE4 MESSAGE5 MESSAGE6 MESSAGE7 MESSAGE8 MESSAGE9 MESSAGE10 MESSAGE11 MESSAGE12 MESSAGE13 MESSAGE14 MESSAGE15 ALARM RINGER EXT.TEL.RINGER 2 [06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 16 ページ 2004年10月26日 火曜日 午後3時44分 <List of set values> 66-9 Purpose Function (Content) Operation test, check Used to check the output operation of the FAX sound signals. (Sound output IC operation check) (Only when FAX is installed.) Section FAX Item Operation Operation/Procedure A voice message is outputted. (Send level is set with SW.) Enter a number during execution to change the kind of signal. Press START to start sending a voice message. Press CUSTOM SETTINGS to terminate. SIMULATION 66-9 MESSAGE OUTPUT CHECK.(SOFT SW.) SELECT 1-20, AND PRESS START. 1.NONE 2.PAUSE 3.MESSAGE1 4.MESSAGE2 5.MESSAGE3 6.MESSAGE4 7.MESSAGE5 8.MESSAGE6 9.MESSAGE7 10.MESSAGE8 11.MESSAGE9 12.MESSAGE10 13.MESSAGE11 14.MESSAGE12 15.MESSAGE13 16.MESSAGE14 17.MESSAGE15 18.ALARM 19.RINGER 20.EXT.TEL.RINGER 2 1 Select 2 and press [START] key. SIMULATION 66-9 MESSAGE OUTPUT CHECK.(SOFT SW.) SELECT 1-20, AND PRESS START.EXECUTING... 1.NONE 2.PAUSE 3.MESSAGE1 4.MESSAGE2 5.MESSAGE3 6.MESSAGE4 7.MESSAGE5 8.MESSAGE6 9.MESSAGE7 10.MESSAGE8 11.MESSAGE9 12.MESSAGE10 13.MESSAGE11 14.MESSAGE12 15.MESSAGE13 16.MESSAGE14 17.MESSAGE15 18.ALARM 19.RINGER 20.EXT.TEL.RINGER Press [CUSTOM SETTINGS] key. NONE PAUSE MESSAGE1 MESSAGE2 MESSAGE3 MESSAGE4 MESSAGE5 MESSAGE6 MESSAGE7 MESSAGE8 MESSAGE9 MESSAGE10 MESSAGE11 MESSAGE12 MESSAGE13 MESSAGE14 MESSAGE15 ALARM RINGER EXT.TEL.RINGER Purpose Function (Content) Press [CUSTOM SETTINGS] key. Same display NONE PAUSE MESSAGE1 MESSAGE2 MESSAGE3 MESSAGE4 MESSAGE5 MESSAGE6 MESSAGE7 MESSAGE8 MESSAGE9 MESSAGE10 MESSAGE11 MESSAGE12 MESSAGE13 MESSAGE14 MESSAGE15 ALARM RINGER EXT.TEL.RINGER 66-10 Select 1 and press [START] key. SIMULATION 66-9 MESSAGE OUTPUT CHECK.(SOFT SW.) SELECT 1-20, AND PRESS START.EXECUTING... 1.NONE 2.PAUSE 3.MESSAGE1 4.MESSAGE2 5.MESSAGE3 6.MESSAGE4 7.MESSAGE5 8.MESSAGE6 9.MESSAGE7 10.MESSAGE8 11.MESSAGE9 12.MESSAGE10 13.MESSAGE11 14.MESSAGE12 15.MESSAGE13 16.MESSAGE14 17.MESSAGE15 18.ALARM 19.RINGER 20.EXT.TEL.RINGER 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 2 User data output, check (display, print) Used to clear all data of image memory (memory send, receive). Confidential data are also cleared. (Only when FAX is installed.) Section FAX Item Data Operation/Procedure The FAX image memory is cleared. 1) Select an item with 10 digit key pad and press START. The following is executed and the display returns to the initial state. 1: Image memory clear 2: Not clear Only the Flash ROM area is cleared. 2) After completion of memory clear, reset. SIMULATION 66-10 IMAGE MEMORY CLEAR. ARE YOU SURE ? 1. YES 2. NO 1 Press [START] key and start clear. SIMULATION 66-10 IMAGE MEMORY CLEAR. EXECUTING... ++++++ During execution of image memory clear, "+" is displayed. When one block or a certain unit of area is cleared, "+" is added. AR-FX12 SIMULATIONS, FAX SOFTWARE SWITCH 6-16 1 [06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 17 ページ 2004年10月26日 火曜日 午後3時44分 66-11 66-12 Purpose Function (Content) Purpose Function (Content) Operation test, check Used to check the output operation of FAX G3 mode 300BPS. (Used to check the MODEM operation.) Send level Max. (Only when FAX is installed.) Section FAX Item Operation Operation/Procedure A signal of 300bps is outputted. (Level Max.) Enter a number during execution to change the kind of signal. Press START to start sending a voice message. Press CUSTOM SETTINGS to terminate. SIMULATION 66-11 300bps SIGNAL OUTPUT.(LEVEL MAX) SELECT 1-6, AND PRESS START. 1.NO SIGNAL 2.11111 3.11110 4.00000 5.010101 6.00001 Setup Used to check the output operation of FAX G3 mode 300BPS. (Used to check the MODEM operation.) Signals are sent in the send level set with the soft switch. (Only when FAX is installed.) Section FAX Item Operation Operation/Procedure A signal of 300bps is outputted. (Send level is set with soft SW.) Enter a number during execution to change the kind of signal. Press CUSTOM SETTINGS to terminate. SIMULATION 66-12 300bps SIGNAL OUTPUT.(SOFT SW.) SELECT 1-6, AND PRESS START. 1.NO SIGNAL 2.11111 3.11110 4.00000 5.010101 6.00001 1 Press [START] key. Press [START] key. Press [CUSTOM SETTINGS] key. SIMULATION 66-11 300bps SIGNAL OUTPUT.(LEVEL MAX) SELECT 1-6, AND PRESS START. EXECUTING... 1.NO SIGNAL 2.11111 3.11110 4.00000 5.010101 6.00001 Same display Press [CUSTOM SETTINGS] key. SIMULATION 66-12 300bps SIGNAL OUTPUT.(SOFT SW.) SELECT 1-6, AND PRESS START. EXECUTING... 1.NO SIGNAL 2.11111 3.11110 4.00000 5.010101 6.00001 1 Select 3 and press [START] key. Same display SIMULATION 66-11 300bps SIGNAL OUTPUT.(LEVEL MAX) SELECT 1-6, AND PRESS START. EXECUTING... 1.NO SIGNAL 2.11111 3.11110 4.00000 5.010101 6.00001 SIMULATION 66-12 300bps SIGNAL OUTPUT.(SOFT SW.) SELECT 1-6, AND PRESS START. EXECUTING... 1.NO SIGNAL 2.11111 3.11110 4.00000 5.010101 6.00001 3 <List of set values> NO SIGNAL 11111 11110 00000 010101 00001 Press [CUSTOM SETTINGS] key. <List of set values> No signal 1 2 3 4 5 6 1 Select 2 and press [START] key. Press [CUSTOM SETTINGS] key. 1 2 3 4 5 6 1 NO SIGNAL 11111 11110 00000 010101 00001 AR-FX12 SIMULATIONS, FAX SOFTWARE SWITCH 6-17 No signal 2 [06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 18 ページ 2004年10月26日 火曜日 午後3時44分 66-13 66-15 Purpose Function (Content) Purpose Function (Content) Setup Used to enter (set) the number for the FAX dial signal output test. (The dial number signal set with this simulation is outputted in the dial signal output test with SIM 66-14~16) (Only when FAX is installed.) Section FAX Item Data Operation/Procedure The dial test number is set. Enter a number with 10 digit key pad, * key, and # key. The upper limit is 20 digits. Press CLEAR to return to the initial state. Press START to register. SIMULATION 66-13 DIAL TEST NUMBER SETTING. INPUT NUMBER AND PRESS START. 0123456789*#01234567 Setup Used to set the make time in the FAX pulse dial mode (20PPS) and to test the dial signal output. (The dial number signal set with SIM 66-13 is outputted.) Used to check dialing troubles and the operation. (Only when FAX is installed.) Section FAX Item Operation Operation/Procedure The dial test is performed. (20PPS output) The make time is set. (Set range : 0-15) When CUSTOM SETTINGS is pressed, the execution is terminated. SIMULATION 66-15 DIAL TEST(20PPS). SELECT 0-1, AND PRESS START. 0. EXECUTE 1.MAKE TIME 7 ; [ +9 ms] 0-9:[0-9], *:[*], #:[# ] 1 Select 0 and Select 1 and press [START] key. Press [CUSTOM SETTINGS] key press [START] key. or [START] key. 66-14 Setup Used to set the make time in the FAX pulse dial mode (10PPS) and to test the dial signal output. (The dial number signal set with SIM 66-13 is outputted.) Used to check dialing troubles and the operation. (Only when FAX is installed.) Section FAX Item Operation Operation/Procedure The dial test is performed. (10PPS output) The make time is set. (Set range : 0-15) When CUSTOM SETTING is pressed, the execution is terminated. SIMULATION 66-15 DIAL TEST(20PPS). SELECT 0-15, AND PRESS START. [1.MAKE TIME] Purpose Function (Content) SIMULATION 66-14 DIAL TEST(10PPS). SELECT 0-1, AND PRESS START. 0. EXECUTE 1.MAKE TIME 7 ; [ +29 ms] Press [CUSTOM SETTINGS] key. SIMULATION 66-15 DIAL TEST(20PPS). EXECUTING... 1.MAKE TIME 7 ; [ +9 ms] <List of set values> 0 1 * Execution Dial pulse make time setup (0 - 15) Dial is send with the setup value of +9ms. 1 Select 0 and Select 1 and press [START] key. Press [CUSTOM SETTINGS] key press [START] key. or [START] key. SIMULATION 66-14 DIAL TEST(10PPS). SELECT 0-15, AND PRESS START. [1.MAKE TIME] 7 Press [CUSTOM SETTINGS] key. SIMULATION 66-14 DIAL TEST(10PPS). EXECUTING... 1.MAKE TIME 7 ; [ +29 ms] <List of set values> 0 1 * 7 Execution Dial pulse make time setup (0 - 15) Dial is send with the setup value of +29ms. AR-FX12 SIMULATIONS, FAX SOFTWARE SWITCH 6-18 [06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 19 ページ 2004年10月26日 火曜日 午後3時44分 66-16 66-17 Purpose Function (Content) Purpose Function (Content) Setup Used to test the dial signal (DTMF) output in the FAX tone dial mode. (The dial number signal set with SIM 66-13 is outputted.) The send level can be set to an optional level. Used to check dialing troubles and the operation. Section FAX Item Operation Operation/Procedure The dial test is performed. (DTMF signal output) 1) The level (dB) setup is made. (Set range: 0 - 15dB) 2) The difference between high group and low group is set. (Set range: 0 - 15) 3) When CUSTOM SETTING is pressed, the execution is terminated. * Setup Used to test the dial signal (DTMF) output in the Fax tone dial mode. Send level Max. Used to check the dial IC operation. (Only when FAX is installed.) Section FAX Item Operation Operation/Procedure The DTMF signal output is checked. (Output level 0) When CUSTOM SETTING is pressed, the execution is terminated. SIMULATION 66-17 DTMF SIGNAL OUTPUT.(LEVEL MAX) INPUT 0 9,* ,#, AND PRESS START. 1 For the set value, refer to the soft SW specifications. Press [START] key. SIMULATION 66-16 DIAL TEST(DTMF). SELECT 0-2, AND PRESS START. 0. EXECUTE 1.HIGH 7 (dB) 2. HIGH-LOW 7 Press [CUSTOM SETTINGS] key. 1 Select 1 or 2 and press [START] key. Press [CUSTOM SETTINGS] key or [START] key. (When 1 is selected) SIMULATION 66-16 DIAL TEST(DTMF). SELECT 0-15, AND PRESS START. 1.HIGH (dB) 7 (When 2 is selected) SIMULATION 66-16 DIAL TEST(DTMF). SELECT 0-15, AND PRESS START. 2. HIGH-LOW Select 0 and press [START] key. (When 0 is selected) Press [CUSTOM SETTINGS] key. SIMULATION 66-16 DIAL TEST(DTMF). EXECUTING... 1.HIGH 7 (dB) 2. HIGH-LOW 7 <List of set values> 0 1 2 HIGH HIGH-LOW 7 Execution High group level High group - low group For the set values, refer to the soft SW specifications. SIMULATION 66-17 DTMF SIGNAL OUTPUT.(LEVEL MAX) EXECUTING... 1 <DTMF signal> 1 - 9, 0, *, # 66-18 Purpose Function (Content) Setup Used to test the dial signal (DTMF) output in the Fax tone dial mode. The send level set with the soft switch is outputted. Used to check the dial IC operation. (Only when FAX is installed.) Section FAX Item Operation Operation/Procedure The DTMF signal output is checked. (Output level is set with soft SW.) When CUSTOM SETTING is pressed, the execution is terminated. SIMULATION 66-18 DTMF SIGNAL OUTPUT.(SOFT SW) INPUT 0 9,* ,#, AND PRESS START. 1 Press [START] key. Press [CUSTOM SETTINGS] key. SIMULATION 66-18 DTMF SIGNAL OUTPUT.(SOFT SW) EXECUTING... <DTMF signal> 1 - 9, 0, *, # AR-FX12 SIMULATIONS, FAX SOFTWARE SWITCH 6-19 1 [06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 20 ページ 2004年10月26日 火曜日 午後3時44分 SIMULATION 66-20 ADDRESS DATA (READ FROM FLASH ROM) ARE YOU SURE ? 1. YES 2. NO 66-19 Purpose Function (Content) Setup Used to backup the Address data (Set values of rapid key dialing) into the flash Memory (AR-MM9). (When FAX is installed and FAX extended memory is installed.) Section FAX Item Operation Operation/Procedure Address data is backed up into Flash ROM. Contents of backup data •One-touch •FTP expansion •Group expansion •Program •User index •Standard sender •I-FAX sender registration •Polling allow number •Memory box •Sender's name •FAX sender •Subject •File name •FAX receive select table •iFAX receive YES/NO The data other than the above are not backed up. SIMULATION 66-19 ADDRESS DATA BACK UP. (WRITE TO FLASH ROM) ARE YOU SURE? 1. YES 2. NO 1 Press [START] key. SIMULATION 66-20 ADDRESS DATA BACK UP. (READ FROM FLASH ROM) EXECUTING... 1 After completion of reading <Set value> 1 2 Read/Write executed Read/Write not executed 66-21 Purpose Adjustment, setup, operation data output, check (display, print) Function (Content) Used to print the FAX information (registrations, communication management, file management, system errors). (Only when FAX is installed.) Section FAX Item Data Operation/Procedure Information related to FAX is printed. 1) Enter the number corresponding to the information(item) to be printed with 10-key. 2) Press [start] key. SIMULATION 66-21 FAX INFORMATION PRINT OUT. SELECT 1-5, AND PRESS START. 1.REGISTERED 2.MANAGEMENT 3.FILE MANAGEMENT 4.SYSTEM ERROR 5.PROTOCOL 1 0 Select other than 0 and press [START] key. Press [START] key. SIMULATION 66-19 ADDRESS DATA BACK UP. (WRITE TO FLASH ROM) EXECUTING... If there is no print data, the display returns to the original state without printing. (When 1) 1 SIMULATION 66-21 FAX INFORMATION PRINT OUT.EXECUTING... 1. REGISTERED After completion of backup <Set values> 1 2 After completion of printing Backup executed No backup <List of set values> 66-20 Purpose Function (Content) Setup Used to restore the backup data (SIM 66-19) to Address data. (When FAX is installed and FAX extended memory is installed.) Section FAX Item Operation Operation/Procedure Address data backed up with SIM 66-19 are read from the option Flash ROM and written into the machine. However, data backed up in the Tiger series cannot be restored to the machine. If an option Flash ROM backed up in the Tiger series is installed, the data in the option Flash ROM are deleted. 1 2 3 4 5 REGISTERED MANAGEMENT FILE MANAGEMENT SYSTEM ERROR PROTOCOL AR-FX12 SIMULATIONS, FAX SOFTWARE SWITCH 6-20 Various registered information Communication management information File management information System error information Protocol information [06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 21 ページ 2004年10月26日 火曜日 午後3時44分 66-23 66-30 Purpose Function (Content) Purpose Function (Content) Operation test, check Used to download the FAX program. (Only when FAX is installed.) Section FAX Item Operation Operation/Procedure The contents of ROM in the option memory (AR-MM9) installing section are copied as FAX program. Setup Used to check TEL/LIU status change. (Only when FAX is installed.) Section FAX Item Operation Operation/Procedure The TEL/LIU status can be checked. The display is highlighted when the status is changed. (This mode is for development, and inhibited in the market.) SIMULATION 66-30 TEL/LIU SENSOR CHECK. HS1 HS2 EXHS RHS SIMULATION 66-23 FAX PROGRAM DOWNLOAD. EJECT PROTECT PIN, AND PRESS START. <List of set values> HS1 HS2 RHS EXHS Press [START] key. SIMULATION 66-23 FAX PROGRAM DOWNLOAD. EXECUTING... Polarity reverse signal Polarity reverse signal Handset hook SW External telephone hook SW 66-31 After normal completion of writing Purpose Function (Content) SIMULATION 66-23 FAX PROGRAM DOWNLOAD. COMPLETE POWER OFF, AND SET PROTECT PIN After failure of writing SIMULATION 66-23 FAX PROGRAM DOWNLOAD. FAIL CHECK PROTECT PIN 66-24 Purpose Function (Content) Operation test, check Used to clear the FAST memory data. (Only when FAX is installed.) Section FAX Item Operation Operation/Procedure 1) Select with 10 digit key pad, press START to execute the following. 1: Fast memory data clear 2: Not clear SIMULATION 66-24 FAST MEMORY DATA CLEAR. ARE YOU SURE ? 1. YES 2. NO Setup Used to set the TEL/LIU status. (Only when FAX is installed.) Section FAX Item Operation Operation/Procedure Entry of only 0 or 1 is effective. Shift the cursor to the bit to enter. Cursor shift keys : :*, : #. The bits are 1, 2, 3, 4, 5, 6, 7, and 8 from the left. The entered bit is highlighted. Press STRT to select the relay. SIMULATION 66-31 TEL/LIU SETTING. INPUT 0 - 1, AND PRESS START. MOVEMENT LEFT: [*] RIGHT: [#] 1. MPXA 2.CION 3. MR 5. S. 6. CML 7. DP 1 2 3 4 5 6 7 8 4. EC 8. 66-32 Purpose Function (Content) Setup Used to check the received data. (Only when FAX is installed.) Section FAX Item Operation Operation/Procedure The fixed data received from the line are checked. (This mode is for production check, and inhibited in the market.) SIMULATION 66-32 RECEIVED DATA CHECK. CHECKING...(OK or NG) 66-29 Purpose Function (Content) Section Item Operation/Procedure Setup Used to clear the Address data. FAX, NWS Operation 1) Select with 10 digit key pad and press START to execute the following. 1: Address data clear 2: Address data not clear SIMULATION 66-29 ADDRESS DATA CLEAR. ARE YOU SURE ? 1. YES 2. NO 10001100 <Display message> CHECKING OK NG Checking Checking complete (Coincided) Checking end (Not coincided) 1 AR-FX12 SIMULATIONS, FAX SOFTWARE SWITCH 6-21 [06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 22 ページ 2004年10月26日 火曜日 午後3時44分 66-33 Purpose Function (Content) Section Item Operation/Procedure 66-35 Setup Used to check signal detection. FAX Operation When the signal is detected, the display is highlighted. Purpose Function (Content) Section Item Operation/Procedure (This mode is for production check, and inhibited in the market.) SIMULATION 66-33 SIGNAL DETECT CHECK. CED BUSY TONE CNG FNET DTMF 66-34 Purpose Function (Content) Setup Used to measure and display the communication time. Section FAX Item Operation Operation/Procedure The time spent for communication is measured. Send/receives are performed in the Standard mode. The communication time is displayed with the simulation. (unit: ms) Operation test, check Modem program rewriting. FAX Operation The modem program in the FAX program is rewritten. 1) Select with 10 digit key pad and press START to execute the following. 1: MODEM program rewrite 2:Not clear 2) Check the loader check sum value. If it is OK, the test is normally completed. If NG, the check sum value (1 byte = hexadecimal) is displayed. 3) If the loader is NG, the MODEM result is also NG. 4) The Modem rewrite result is displayed. SIMULATION 66-35 MODEM PROGRAM RELOAD. ARE YOU SURE ? 1. YES 2. NO Press [START] key. SIMULATION 66-35 MODEM PROGRAM RELOAD. EXECUTING... LOADER...(OK or Check Sum value 1 byte (Hexadecimal)) MODEM...(COMPLETE or NG code 1 byte (Hexadecimal)) SIMULATION 66-34 COMMUNICATION TIME DISPLAY. ***** ms <Setup for send> Communication means Image quality Density ECM Sender record 1 After completion of writing memory transmission Normal Thin ON OFF SIMULATION 66-35 MODEM PROGRAM RELOAD. LOADER...OK MODEM...COMPLETE <Result of MODEM writing> COMPLETE 81 82 83 84 NG AR-FX12 SIMULATIONS, FAX SOFTWARE SWITCH 6-22 Writing completed Check sum error Write error Delete error Verify error Due to loader error [06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 23 ページ 2004年10月26日 火曜日 午後3時44分 66-36 66-39 Purpose Function (Content) Purpose Function (Content) Registration of FAX destination Section FAX Item Operation/Procedure The current destination saved in the EEPROM of FAXBOX is displayed. Entries of 1 - 6 only are valid. Enter the number corresponding to your desired destination. (If no destination is saved in the EERPOM of FAXBOX, "0" is displayed.) 1) Enter the number with the 10-key and press [START] key, and the destination will be written on the FAX. Operation test, check Used to check I/F between MFPC and MDMC. Check is made in the data line or the command line. Section FAX Item Operation Operation/Procedure 1) Select with 10 digit key pad and press START. 2) When check is "repeat," the operation is executed until the result becomes NG or CUSTOM SETTING is pressed. SIMULATION 66-36 MFPC-MDMC I/F CHECK . INPUT 1-8, AND PRESS START. 1. MFPC<-MDMC(DATA once) 2. MFPC->MDMC(DATA once) 3. MFPC<-MDMC(DATA repeat) 4. MFPC->MDMC(DATA repeat) 5. MFPC<-MDMC(CMD once) 6. MFPC->MDMC(CMD once) 7. MFPC<-MDMC(CMD repeat) 8. MFPC->MDMC(CMD repeat) 1 SIMULATION 66-39 FAX DESTINATION SETUP. SELECT 1 - 6, AND PRESS START 0. NO DESTINATION 1. JAPAN 2. U.S.A/CANADA 3. EUROPE 4. AUSTRALIA 5. CHINA 6. ASIA Press [START] key. SIMULATION 66-36 MFPC-MDMC I/F CHECK . INPUT 1-8, AND PRESS START. EXECUTING... When check is "once" or "repeat" and the result is NG 1 When check is "repeat" and [CUSTOM SETTINGS] key is pressed. SIMULATION 66-36 MFPC-MDMC I/F CHECK . INPUT 1-8, AND PRESS START. EXECUTING...(OK or NG) <List of display values> 1 2 3 4 5 6 7 8 MFPC <- MDMC MFPC -> MDMC MFPC <- MDMC MFPC -> MDMC MFPC <- MDMC MFPC -> MDMC MFPC <- MDMC MFPC -> MDMC press [START] key <List of display values> 1 2 3 4 5 6 Japan North America Europe (including U.K.) Australia China Asia Data line once only Data line once only Data line repeat Data line repeat Command line once only Command line once only Command line repeat Command line repeat AR-FX12 SIMULATIONS, FAX SOFTWARE SWITCH 6-23 1 [06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 24 ページ 2004年10月26日 火曜日 午後3時44分 SIMULATION 66-43 PIC ADJUSTMENT VALUE WRITING . ENABLE WRITE PIN (for FAX PROGRAM ROM). SELECT 0-12, AND PRESS START. 0. WRITING for PIC 1. ci_level_judge 2 2. ci_cycle_min 10 3. ci_cycle_max 107 4. ci_range 5 5. ci_count 3 6. ci_detect 8 7. fnet_level_judge 1 8. fnet_range 3 9. fnet_time_out 100 10. fnet_count 3 11. poff_time 3 12. mswon_level_judge 3 66-42 Purpose Function (Content) Used to rewrite the program to the PIC installed in the FAX box. FAX Section Item Operation/Procedure During writing, "EXECUTING" is displayed. When writing is completed, if the process is OK, "OK" is displayed. In case of an error, "NG" is displayed. Possible causes of NG are: •Write protect is set. •PIC is not installed. •Failure in access to PIC Serect other than 0, and Press [START] key. Serect 0,and Press [START] key. SIMULATION 66-42 PIC PROGRAM RELOAD. ARE YOU SURE?. 1. YES 2. NO 1 SIMULATION 66-43 PIC ADJUSTMENT VALUE WRITING. EXECUTING... Press [CUSTOM SETTING] key. Press [CUSTOM SETTING] key SIMULATION 66-42 PIC PROGRAM RELOAD OK SIMULATION 66-43 PIC ADJUSTMENT VALUE WRITING. OK ( or NG ) <List of display values> * Execution (FAX program writing is allowed.) Cancel (FAX program writing is allowed.) FAX program writing is allowed by the jumper and the DIP switch which differ depending on the model. 66-43 Purpose Function (Content) 1 Press 1 key. SIMULATION 66-42 PIC PROGRAM RELOAD EXECUTING... 1 2 2 Press [CUSTOM SETTING] key or Press 2key SIMULATION 66-43 PIC ADJUSTMENT VALUE WRITING. ARE YOU SURE? 1.YES 2.NO Press [START] key. After completion of reload Press [START] key or Press [CUSTOM SETTING] key SIMULATION 66-43 PIC ADJUSTMENT VALUE WRITING. INPUT VALUE 1-15, AND PRESS START. 1. ci_level_judge(1-15) Note: Release write protect. 1 To execute this simulation, FAX program writing must be allowed. (Jumper and DIP switch which differ depending on the model)The adjustment value of PIC are changed and written. The current setting is highlighted beside the item. FAX Section Item Operation/Procedure 1) Set the adjustment value with 10-key. Press P key to save the entered value. The setting range differs depending on the item. Example:1.Number of sensing until settlement of the CI signal level: (Default) 2, (Range) 1 - 15 * When the value outside the specified range is displayed, scan from the PIC may not have been completed. (Because of FAX program write protection, etc.) 2) When YES is selected, the adjustment values are collectively written into the PIC installed to the FAX box. Normal completion of writing: "WRITING OK" In case of an error:"NG" <List of display values> 0 1 2 3 4 5 6 7 8 9 10 11 12 WRITING to PIC • • Writing to PIC ci_level_judge(1-15) ci_cycle_min(0-254) ci_cycle_max(0-254) ci_range(0-127) ci_count(1-15) ci_detect(1-15) fnet_level_judge(1-15) fnet_range(0-74) fnet_time_out(76-255) fnet_count(1-15) poff_time(0-15) mswon_level_judge(2-15) AR-FX12 SIMULATIONS, FAX SOFTWARE SWITCH 6-24 [06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 25 ページ 2004年10月26日 火曜日 午後3時44分 6. FAX software switch A. SOFT SW SETUP CHANGE QUICK REFERENCE Large item Dial (Calling) Medium item Reception (Calling) Key operator Soft SW No. SW 70-5 SW 62-1~2 Dial disable/Erroneous dialing SW 70-1~4 Dial disable/Erroneous dialing Tone/Pulse default setup (Dial ringing signal Initial setup setup) SW 62-5~6 Dial disable •DTMF signal level (high group) •DTMF send level (low group) •DTMF signal send time •DTMF minimum pause time setup SW 66-5~8 Dial disable in PB (PB/FAX service, etc.) SW 67-1~4 Dial disable in PB (PB/FAX service, etc.) SW 68-1~5 Dial disable in PB (PB/FAX service, etc.) SW 69-1~8 Dial disable in PB (PB/FAX service, etc.) Make time (10PPS) setup SW 63-1~4 Dial disable in pulse Break time (10PPS)setup SW 63-5~8 Dial disable in pulse Minimum pause (10PPS)setup SW 64-1~4 Dial disable in pulse Busy tone detection SW 71-3 Busy tone detection disable Busy tone detection cycle SW 71-4~5 Busy tone detection error DT/BT detection level SW 71-6~7 Busy tone detection disable Dial tone detection SW 70-6 Dial tone detection disable Dial tone monitor time SW 70-7 Dial tone detection error Lower limit of busy tone detection time (ON time) SW 72-1~2 Busy tone detection error Upper limit of busy tone detection time (ON time) SW 72-3~4 Busy tone detection error Frequency range setup for detection of DT/ BT SW 71-1~2 Dial tone/busy tone detection error Remote machine not responding Resend when no response from the other party SW 56-8 No recall wanted when remote machine not responding Error Number of times of recall in communication error send setup SW 57-5~8 Error Recall allowed in communication error Send setup SW 59-3 Error Recall interval in communication error Busy Recall interval in busy state send setup SW 57-1~4 Busy Number of times of recall in busy send setup SW 58-1~4 Busy Recall allowed in busy send setup SW 59-2 Not receiving Number of calls for auto receives Receive setup SW 3-5~8 Number of reception call Auto/Manual default setup User setup SW 7-2 Initial setup of auto reception/manual reception Lower limit of call signal ON time SW 75-1~4 CI signal detection disable Upper limit of call signal ON time SW 75-5~8 CI signal detection disable Lower limit of call signal OFF time SW 76-1~4 Ci signal detection disable Upper limit of call signal OFF time SW 76-5~6 CI signal detection disable SW 77-1~4 CI signal detection disable SW 3-2 External telephone connection SW 12-1~8 External telephone off-hook detection error SW 13-1~8 Remote switch detection error SW 14-1 Remote switch inhibit CI detection disable SW 58-5~8 Call signal OFF non-detection time External telephone handset Purpose of use Dial disable Initial setup Signal detection Redial Content of switch Remote Detection of line current when dialing machine Dial call wait time calling disable Pause time setup (between dialing) External telephone connection External telephone connection Initial setup External External telephone off-hook detection time telephone offhook detection Remote switch Remote switch number setup number Remote switch Remote reception instruction setup Notification to external telephone in remote switch Remote switch operation allowed Initial setup SW 14-2 SW 14-3 AR-FX12 SIMULATIONS, FAX SOFTWARE SWITCH 6-25 Remote switch is made when calling from external telephone. [06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 26 ページ 2004年10月26日 火曜日 午後3時44分 Large item TEL/FAX auto switch Communication Medium item Content of switch General SG3 Receive Receive print G3/SG3 Purpose of use SW 51-1 External Ring back tone ON time telephone call SW 10-1~4 External telephone call disable CNG detection disable Ring back tone OFF time SW 10-5~8 External telephone call disable CNG detection disable Signal send level SW 15-1~8 When the remote machine does not receive signals in a proper level. SW 17-5 Error resend frequently occurs, resulting in extended communication time. Timer setup between flag and address (V.21-FSK) SW 20-3~4 Communication error in a satellite line Coding capacity in send/receive (V.34 communication) (Reflected on DIS/DCS/DTC.) SW 17-3~4 Error in JBIG mode Coding capacity in send/receive (Reflected on DIS/DCS/DTC) (Other than V.34) SW 17-7~8 Error in JBIG mode V.34 mode function(When call out and polling) SW 43-1 Frequent errors in SG3 communication V.34Symbol Rate Mask (when receiving) SW 43-3~6 Frequent errors in SG3 communication V.34 mode function in manual communication SW 42-8 Frequent errors in SG3 communication in FAX service Countermeasures against echo in transmission (Used to set the hold time from DIS reception to signal sending.) SW 20-7 An error occurs in phase B. DIS reception confirmation in G3 transmission SW 20-2 An error occurs in phase B. ECM (Valid for other than V.34) (Reflected on V.21 DIS/DCS.) Send Key operator Soft SW No. Voice answering send level to the line Initial setup V.34 mode transmission speed SW 25-5 CED signal detection error SG3 V.34 mode transmission speed SW 44-1~4 An error occurs in SG3 communication. G3 Echo suppresser tone setup SW 27-1~4 An error occurs in V.29 communication Modem transmission speed (Except for V.34) (DCS) SW 16-1~4 To uncertain/certain receiver DCS-TCF interval time SW 24-1 An error occurs in training. Error process in RTN reception SW 30-2 OK is displayed when RTN is received. G3/SG3 CSI send SW 20-1 SG3 V.34 mode reception speed SW 44-5~8 An error occurs in SG3 communication. G3 Countermeasures against echo in reception (CED tone send interval) SW 20-6 An error occurs n phase B in reception. Reception modem speed fixed (other than V.34) (DIS) SW 16-5~6 Fall back or an error occurs due to poor line conditions. Paper selection EOL detection timer SW 23-1 EOL time up occurs frequently. RTN send line error rate SW 23-7~8 Line error occurs frequently. EQM judgment threshold value when confirming TCF reception SW 24-2 TCF reception error occurs. Judgment method in confirmation of TCF reception SW 24-3 TCF reception error occurs. Sub scan length judgment SW 35-2 Print is not made on the selected paper. FAX paper exit tray setup <Dragon> Receive setup SW 28-7~8 Print is not made on the selected paper. Received data print condition setup Receive setup SW 35-3~4 To make divided print instead of reduction print. Automatic reduction/dispose setup Receive setup SW 35-7 To disable reduction print. Setup of magnification ratio in automatic reduction SW 36-1~8 To disable reduction print on fixed size paper. Reduction/dispose setup when printing A3, 11X 17 SW 35-8 Print is not made on the selected paper when A3-11x17 size document is received. SW 34-8 To make duplex print of received document Rotation print SW 35-1 To disable rotation print Received document output setup SW 35-5 To print after reception of each page 11 x 17 paper reception width setup SW 37-3 To print 11x17 document as B4 width Reception size specification (Indicates reception capacity.) SW 37-1~2 To limit the reception size. Duplex reception print Receive setup AR-FX12 SIMULATIONS, FAX SOFTWARE SWITCH 6-26 [06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 27 ページ 2004年10月26日 火曜日 午後3時44分 B. Details SW Bit No. No. 1 Item 1-8 Country code Switch selection and function Country code set by ITU-T. Control is made according to the set country code. USA 1 0 Initial value Key operator North America 1 1 0 1 0 1 2 1 TSI judgment setting Used to set receive reject or receive allow when there is no TSI signal from the when a certain number remote machine or when the TSI signal is all space, when a certain number receive reject receive reject is set to valid by the key operation. (No signal or all space) 1: Receive reject 0: Receive allow 0 Receive allow 2 Specified number receive rejection setup (FAX) Used to set whether a certain number receive reject by FAX is Enabled or Disabled. In auto receive only. 0 Specified number receive ignored (Invalid) Manual receive mode receive rejection setup (FAX) Used to set whether a certain number receive reject by FAX is Enabled or Disabled. In manual receive only. 0 Specified number ignored Manual receive mode auto receive switch setup Used to set whether auto receive switch is performed or not in the manual receive mode.The number of switching to auto receive is set with SW2-5-8. 0 Inhibit Receive setup 1 9 Receive setup 1 YES Initial setup 0 NO Operation setup 2 Receive setup 0 Protect Polling security setup 0 Output 3 4 1: Specified number receive rejection (Valid) 1: Specified number receive rejection 1: Allow(Switched) 0: Specified number receive ignored (Invalid) 0: Specified number receive ignored(OFF) 0: Inhibit (Not switched) 5-8 Number of calls to Used to set the number of calls to switch to auto receive in manual receive switch to auto receive in mode. manual receive This function is valid only when SW2-4 is set to "1: Allow (to switch)." If a value outside the set range is inputted, the default setup is made. 3 1 Not used 2 External telephone connection Receive setup 0 0 1 0 Setting to use an external telephone. If not set to YES, an external telephone cannot be used. 1: External telephone YES 0: External Telephone NO In North America, users cannot set this switch to "0: NO." 3 Default finish stamp Used to set whether the finish stamp is used or not after completion of document scan when the SPF/RSPF is used. 1: Finish stamp used 0: Finish stamp not used If a document feed unit other than the SPF/RSPF is used, this setup is invalid. 4 4 Not used 0 5-8 Number of calls for auto Used to set the number of calls to start auto receive (to catch the line). Setup is receives made in the range of 0 ~ 15 by binary input. When set to 0, no ringing is made. For the nighttime FAX mode (main SW OFF, memory SW ON), however, ringing of an external telephone is made. 0 1,2 Not used 0 0 1 0 0 3 Polling protection Used to set Enable/Disable of confidential protection (inhibition of transmission to erroneous party) in transmission of bulletin board. Confidential protection is made by collating the number registered in this machine and that in the other party machine. Sender's number and send request allow number are collated each other. In this machine, Sharp's unique collating of system number ID number is not performed. 1: Not protected 4 Relay data output 0: Protected Used to set whether the document received from the relay station is outputted or not when relay broadcast reception is made. 1: Document received 0: Document received from relay station is not from relay station is outputted. outputted. Similar to F code relay broadcast indicating reception. AR-FX12 SIMULATIONS, FAX SOFTWARE SWITCH 6-27 [06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 28 ページ 2004年10月26日 火曜日 午後3時44分 SW Bit No. No. 4 Item 5 Not used 6 F code relay broadcast function Switch selection and function USA Initial value Key operator 0 Used to set whether relay broadcast transmission is made by receiving F code relay broadcast instruction from the other party or F code relay broadcast instruction is not received (even though the relay box number by SUB is matched on). Though this item is set to "without this function," F code relay broad cast instruction can be transmitted. 0 Not Receive 0 Receive 0 Resend 0 Line disconnection with DCN 0 Ultra fine 1: F code relay 0: F code relay broadcast broadcast instruction instruction is not received is received from even from allowed party. allowed party. (Judged as a communication error.) 7 F code confidential reception Used to set YES/NO of F code confidential reception from the other party (even though the confidential box number is matched by SUB). Though this item is set to NO, F code confidential transmission can be made. 1: F code confidential 0: F code confidential reception inhibited (Judged reception allowed. as a communication error.) 8 F code communication error process Used to set YES/NO of resend in F code transmission. When, however, SW59-3 (Recall allow in communication error) is set to 0 (Inhibit), recall is not made. 1: Not resend 5 1 F code password transmission setup when the other party has no function of password 2,3 Image quality in reception (Reflected on DIS, not reflected on DTC) 0: Resend Used when the other party machine has no function of F code password in F code transmission. 1: Send with password 0: Disconnecting of line with DCN Used to set reception image resolution in FAX reception ringing (DIS send). Bit No. 2 3 Standard 1 Fine 1 0 Super fine 0 1 Ultra fine 0 0 0 1 4-8 Not used 0 0 0 0 0 6 1 SUB capacity in reception Used to set SUB capacity (Bit 49) to "1" in reception (DIS send). 2 SEP capacity in reception Used to set SEP capacity (Bit 47) to "1" in reception (DIS send) 3 Reception PWD/SID capacity Used to set PWD/SID capacity (Bit 50) to "1" in reception (DIS send). Automatic reduction send Used to set whether the transmitted document is reduced or the both ends are cut when the transmitted document size is greater than the recording paper size (width) in the other party's machine. 4 1: NO (Set to 0) 1: NO (Set to 0) 1: NO (Set to 0) 6 YES 0 YES 0 Reduction setup Send setup 0 Rotate Send setup 0 Rotate Send setup 0: YES (Set to 1) 0 Send by reduction document (A4R) with rotating Rotation send selection Used to set whether B5R document is transmitted in A4 width (B5R) or the scan (B5R B5) image is rotated and transmitted in B4 width (B5). (16K 16KR) 1: Send as A4 width 0: Send as B4 width document (B5R) without rotating 0 0: YES (Set to 1) Rotation send selection Used to set whether A4 document is transmitted in A3 width (A4) or A4 (A4 A4R) document is rotated and transmitted in A4R. (LTR LTR-R) 1: Send as A3 width 0: Send as A4 width document (A4) without rotating YES 0: YES (Set to 1) 1: Send by cutting both edges without reduction 5 0 document (B5) with rotating AR-FX12 SIMULATIONS, FAX SOFTWARE SWITCH 6-28 [06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 29 ページ 2004年10月26日 火曜日 午後3時44分 SW Bit No. No. 6 7 Item Switch selection and function Rotation send selection Used to set whether A5R document is transmitted to A4 width (A5R) or the scan image is rotated and transmitted in A4 width (A5). (A5R A5) (INVOICE-R 1: Send as A4 width 0: Send as A4 width INVOICE) document (A5R) document (A5) with without rotating 8 1 Not used 2 Auto/Manual default setup Initial value 0 Rotate 0 Access allowed Key operator Send setup rotating EEPROM access inhibit When an access trouble to EEPROM in the modem controller occurs, FAX operation cannot be performed. When this item is set to INHIBIT, FAX operation can be performed. The modem controller adjustment values (part of soft switch) are saved in EEPROM. ALLOW or INIHIBIT of access to EEPROM is set. 1: Access to EEPROM inhibited 7 USA 0: Access to EEPROM allowed 0 Used to select automatic reception or manual reception. (Do not set to manual reception when handset or external telephone is not connected. However, setting is possible and reception with on-hook key is possible.) In the manual reception mode, when the machine is in the nighttime FAX mode, the machine is booted but reception ringing is not made. 1: Manual reception 0 Auto reception User setup 0: Auto reception 3,4 Not used 0 0 5 Remaining memory capacity for reception Used to set whether call-in is made until remaining memory capacity reaches 64KB or less or 128KB or less. 0 128KB or less 0 Output 1: Call-in until remaining 0: Call-in until remaining memory is 64KB or less. memory is 128KB or less. 6 Memory over during reception Used to set whether received data are outputted or disregarded without outputting in case of memory over during reception. 1: Received data are not outputted. 0: Received data are outputted. 7,8 Not used 0 0 8 1,2 Image capacity in polling (reflected on DTC) Used to set image capacity of the machine when polling. It is reflected on DTC, and is unrelated to SW5-2-5 (Image capacity during reception). Bit No. Standard 3 Error page output selection in FAX reception error 1 2 1 1 Fine 1 0 Super fine 0 1 Ultra fine 0 0 Used to set whether error page is outputted or disposed without outputting in case of a communication error during FAX reception. 0 Ultra fine 0 0 Output 0 Quick online Send setup transmissio n 0 1 page 1: Error page is not outputted. 0: Error page is outputted. When, however, an error occurs during F code relay instruction reception or F code confidential reception, the error page is not outputted regardless of this SW setup. 4 Quick online/memory transmission selection Used to select quick online transmission mode or memory transmission mode. 1: Memory transmission 0: Quick online transmission 5-8 Number of pages of dial Used to set the number of pages of scanning at the dial ringing timing in quick ringing in quick online online transmission. Can be set in the range of 1~15 pages by binary input. transmission 0 0 1 9 1-6 Not used 0 1 1 0 0 0 AR-FX12 SIMULATIONS, FAX SOFTWARE SWITCH 6-29 [06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 30 ページ 2004年10月26日 火曜日 午後3時44分 SW Bit No. No. 9 Item Switch selection and function USA 7,8 Not used Initial value Key operator 0 0 10 1-4 Ring back tone ON time Used to set the pseudo-ringing to an external telephone and the ring back tone ON time to the line. Setting can be made in the range of 0 ~ 3sec in the increment of 200ms. When set to 0, however, same as setting to 1sec. 5-8 Ring back tone OFF time 11 1-4 Image quality priority selection (Standard image quality setup) 1 Used to set the initial setting of image quality selection when scanning a document by FAX. When set to "0100," "1000," "1001" and later, the same operation is made as normal characters. 0 Normal text Automatic wake up mode 0 1 1 2 3 4 0 0 0 0 Fine 0 0 0 1 Super fine 0 0 1 0 Ultra fine 0 0 1 1 Fine (Half tone) 0 1 0 1 Super fine (Half tone) 0 1 1 0 Ultra fine (Half tone) 0 1 1 1 Used to set whether the machine is automatically wake up and the received document is outputted or the received document is saved in memory and will be outputted when the power is turned on next time when a FAX message is received with the main SW ON and the FAX power SW ON or in the power save mode. 1: Saved in memory without booting machine 1sec 1 Used to set the pseudo-ringing to an external telephone and the ring back tone OFF time to the line. Setting can be made in the range of 0 ~ 3sec in the increment of 200ms. When set to 0, however, same as setting to 2sec. When set to less than 2sec, busy tone may be erroneously detected. Bit No. 5 0 2sec 0 1 0 0 Normal text Operation setup 0 0 0 Output Initial setup 0: Output by automatic booting of machine 6 Not used 7 Image quality setup when saving(FAX) 0 8 Selection of resend Used to select resend pages in case of an error in transmission without F code. page in case of an error 1: All pages 0: After error page Used to set whether the initial setting is set to Enable of the image quality of filed documents when FAX-sending filed documents. 1: Applied 0 Not applied Operation setup 0 After the error page 0 300ms 0: Not applied (Resend all pages from the first page including transmitted pages.) (Resend after error page) If transmission includes F code, all pages are resent. 12 1-8 External telephone offhook detection time Used to set the time to recognize external telephone off-hook detection. The set range is 0ms - 255ms in the increment of 10ms by binary input. 0 0 1 1 1 1 0 13 1-8 Remote switch number setup Used to set the number for remote switch receive from an external telephone by binary input. However, remote switch numbers of "XX*" and "*" are fixed. When set to "C" (BCD) or above, same as setting to the initial value of "5" (BCD). 55 (Japan) 5* (Outside Japan) 0 5* 1 0 1 1 0 1 0 14 1 Remote reception instruction Used to set YES/NO of remote switch from an external telephone. 1: NO (remote switch disable) 0: YES (Remote switch enable) AR-FX12 SIMULATIONS, FAX SOFTWARE SWITCH 6-30 0 YES Initial setup [06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 31 ページ 2004年10月26日 火曜日 午後3時44分 SW Bit No. No. 14 2 3 Item Switch selection and function USA Notification to external telephone in remote switch Used to set whether an alarm notification is sent to the external telephone or not when remote switch from an external telephone is performed. Remote switch operation allowed Used to set whether remote switch from an external telephone is allowed only when call-in or when call-in and call-out. 1: NO (Not notify) Initial value 0 YES 0 Only when receiving Key operator 0: YES(Notify) 1: Switch enable in call-in 0: Switch enable only in and call-out call-in For North America, remote switch is enabled even in stand-by. For North America, this switch is disabled. 4-8 Not used 0 0 0 0 0 15 1-8 Signal send level Used to set the signal send level from the Modem. The set range is 0 ~ 21 in the increment of 1dBm by binary input. For an actual line, the actual value is virtually the same as the set value. The max. level differs depending on the destination country. If setting exceeds the max. level, the max. level of the current destination is applied to. (However, North America is excluded.) 0 -10dBm 0 0 0 1 0 1 0 16 1-4 Modem transmission speed (Except for V.34) (DCS) Used to set the first speed in transmission of other than V.34. Reflected on DCS. Transmission is made not always at this speed. Bit No. 1 2 3 4 V.27ter 2400bps 0 0 0 V.29 9600bps 0 0 V.27ter 4800bps 0 V.29 7200bps V.33 14400bps V.33 12000bps For bit marked with 5,6 Reception modem speed fixed (other than V.34) (DIS) Bit No. 1 2 3 4 0 V.17 14400bps 1 0 0 0 0 1 V.17 9600bps 1 0 0 1 0 1 0 V.17 12000bps 1 0 1 0 0 0 1 1 V.17 7200bps 1 0 1 1 0 1 0 0 1 1 0 0 0 1 0 1 1 1 0 1 0 1 1 0 1 1 1 0 0 1 1 1 1 1 1 1 1 0 V.1714400bps 0 0 , set to V.17 14400bps. Used to set the first speed in transmission of other than V.34. Transmission is made not always at this speed. Bit No. 5 0 Not fixed 0 6 Fixing NO 0 0 V.29-9600bps 0 1 V.27ter-4800bps 1 0 V.17-14400bps 1 1 7,8 Not used 0 0 17 1,2 Not used 0 0 3,4 Coding capacity in send/ Used to set the coding capacity to transmit to the remote machine in V.34 receive communication. (V.34 communication) Bit No. 3 4 (Reflected on DIS/DCS/ JBIG/MMR/MR/MH 0 0 DTC.) MMR/MR/MH 0 1 MR/MH 1 0 MH 1 1 AR-FX12 SIMULATIONS, FAX SOFTWARE SWITCH 6-31 0 0 JBIG/MMR/ MR/MH Adjustment value [06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 32 ページ 2004年10月26日 火曜日 午後3時44分 SW Bit No. No. 17 Item Switch selection and function USA 5 Used to set whether error resend mode is executed or not. ECM Valid only when communication is made in a mode other than V.34. (Valid for other than V.34) 1: NO (ECM function NO) 0: YES (Reflected on V.21 DIS/ (ECM function YES) DCS.) 6 Not used 0 Initial value YES 0 7,8 Coding capacity in send/ Used to set coding capacity to transmit to the other party machine in a receive communication of other than V.34. (Reflected on DIS/DCS/ Bit No. 7 8 DTC) JBIG/MMR/MR/MH 0 0 (Other than V.34) MMR/MR/MH 0 1 MR/MH 1 0 MH 1 1 18 1-4 Not used 0 0 JBIG/MMR/ MR/MH 0 1 0 0 5 PIN code conformity Used to set whether the dial number display of FAX is limited to 16 digits or not. When this item is set to "1: Support," the FAX number display by the resend key is limited to 16 digits. The display of completion of the job status is also limited to 16 digits. 1: Conform 0 Not conform 0: Not conform 6-8 Not used 0 0 1 19 1-7 Not used 0 0 0 0 0 0 0 8 0 Not booting 0 Send Used to set whether DIS reception is conformed or not in G3 mode transmission (valid only in other than V.34). This is valid only when communication is made in other than V.34. 1: Reception of DIS 0: Reception of NSF/DIS is is checked twice. checked once, reception without NSF is checked twice. 0 0 Used to set the timer between Flag and address when receiving FSK signal in a communication other than V.34. 0 6sec Machine booting when Used to set whether the machine is booted or not by detection of 1300Hz signal 1300Hz is detected in from the line in the nighttime FAX mode. (This serves as the MDMC PWB the nighttime FAX mode jumper in Tiger series.) When this is changed to "Booted," the machine may be booted by noises on the line. Check the singles on the line. 1: Booting 20 1 CSI send 0: Not booting Used to set whether CSI send is performed or not. The CSI signal includes the sender's number. 1: CSI signal not send 2 DIS reception confirmation in G3 transmission 3,4 Timer setup between flag and address (V.21-FSK) 5 Bit No. 0: CSI signal send 3 0 4 6sec 0 0 15sec 0 1 30sec 1 0 120sec 1 1 Not used 0 AR-FX12 SIMULATIONS, FAX SOFTWARE SWITCH 6-32 Key operator Initial setup [06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 33 ページ 2004年10月26日 火曜日 午後3時44分 SW Bit No. No. 20 Item Switch selection and function USA Initial value 6 Used to set the time interval (sec) from sending CED or ANSam to sending Countermeasures FSK signal of DIS. against echo in reception 1: 500msec 0: 75msec (CED tone send interval) If either SW20-6 or SW2-7 is YES, disconnection of the line after completion of communication is delayed for 1.5sec. 0 75msec 7 Countermeasures Used to set the time interval (sec) from DIS reception to DCS signal sending. against echo in This is valid only in the mode other than V.34. transmission 1: 500msec 0: 200msec (Used to set the hold time from DIS reception to signal sending.) 0 200msec 8 Not used 0 21 1-3 Setup of call time in auto Used to set the time (sec) of calling when the other party does not receive the transmission call in automatic transmission. (T0 timer setup) The set range is 30 - 75sec in the increment of 15sec by binary input of N into "(15sec x N) + 30sec." The set range of N is 0 ~ 7. When set to a value outside the set range, the initial value of the destination is applied to. 4-7 T1 timer setup 8 Used to set the time (sec) for connection of line when the other party does not respond in FAX communication. The set range is 30 - 105sec in the increment of 5sec by binary input of N into "(5sec x N) + 30sec." N is set in the range of 0 - 15. T1 timer is the timer for the time from recognition of FAX CED or DCS) by the other party after connection of line. The ITU-T standard is 35 ± 5sec. 0 45sec 0 1 0 40sec 0 1 0 Not used 0 22 1-4 Not used 0 0 0 0 5,6 T4 timer setup at auto mode (+1.5sec for manual) Used to set the timer up to respond and receive. Timer for DCS signal to respond and receive. For the ITU-T standard, 3sec ± 15%. Bit No. 0 3sec 0 5 6 3sec 0 0 4sec 0 1 5sec 1 0 6sec 1 1 7,8 Not used 0 0 23 1 EOL detection timer Used to set the detection timer (sec) of EOL (End Of Line) in Phase C reception of G3 mode. 1: 25sec 0 13sec 0: 13sec If an error occurs in EOL detection, it is processed as EOL not detected. 2-6 Not used 0 0 0 0 1 7,8 RTN send line error rate Used to set the threshold value for judgment of RTN sending in G3 reception. The threshold value is of STD conversion. The half of this value is used for judgment of RTP sending. Bit No. 7 8 6 liens 0 0 12 lines 0 1 60 lines 1 0 120 lines 1 1 1 60 lines 0 When, for example, FINE is received, the threshold value is doubled. 24 1 DCS-TCF interval time Key operator Used to set the time interval (sec) from DCS sending to TCF signal sending. 1: 150msec 0: 75msec The ITU-T standard is 75 ± 20ms. AR-FX12 SIMULATIONS, FAX SOFTWARE SWITCH 6-33 0 75msec Send setup [06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 34 ページ 2004年10月26日 火曜日 午後3時44分 SW Bit No. No. 24 2 3 Item Switch selection and function EQM judgment threshold value when confirming TCF reception Used to set whether the threshold value (FTT) is set severely or loosely for EQM judgment in confirmation of TCF reception. Judgment method in confirmation of TCF reception Used to set the judgment method of FTT in confirmation of TCF reception. 4 Not used 5 Simplified ACR function 1: Loosely CED signal send Initial value 0 Severely 0 0 0: Severely If set loosely, TCF is easy to return CFR, but apt to cause an error in PIX (Phase C). 1: Judged by EQM value. TCF is checked loosely. 0: Received data is judged to be 0 or not, and EQM value is judged. 0 1: Function ON 6 USA 0 Function OFF 0 Send 0 3sec 0: Function OFF Used to set whether CED signal is sent or not. 1:CED signal is not sent. 0:CED signal is sent. Valid only when SW43.1 (V.34 mode function ) is OFF. This is because ANSam signal is indispensable in V.34 mode. 7,8 CED signal send time Used to set the time for CED signal send. 7 8 3sec Bit No. 0 0 4sec 0 1 5sec 1 0 6sec 1 1 0 ANSam signal follows SW46-7 ~ 8. 25 1,2 CED/ANSam send start Used to set the wait time for sending CED/ANSam signals to the line from FAX wait time reception state after connection of the line. Bit No. 3,4 CNG send time 1 2 2.25sec 0 0 3sec 0 1 4sec 1 0 2.25sec 1 1 Used to set the wait time from connection of the line to sending of CNG signal to the line. Bit No. 5 CED detection time 3 2.25sec 0 1 2sec 1 4 0.5sec 0 0 1sec 0 1 1.5sec 1 0 2.0sec 1 1 Used to set the wait time for determination of the signal when detecting CED/ ANSam signal. 1: 1000ms 0 0 500ms 0: 500ms 6-8 Not used 0 0 0 26 1,2 Number of times of RCP Used to set the number of times of RCP send when sending Phase C in ECM send system. 1 2 3 times Bit No. 0 0 6 times 0 1 9 times 1 0 12 times 1 1 0 3 times 0 When the other party cannot detect the RCP frame, it becomes easy to detect RCP. 3 Number of RTC EOL send Used to set how many EOL's are sent as RTC when sending Phase C. 1: 12 times 0: 6 times When the other party cannot detect the RCP, it becomes easy to detect RCP. AR-FX12 SIMULATIONS, FAX SOFTWARE SWITCH 6-34 0 6 times Key operator [06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 35 ページ 2004年10月26日 火曜日 午後3時44分 SW Bit No. No. Item Switch selection and function USA 26 4-8 Not used Initial value Key operator 0 0 0 0 0 27 1-4 Echo suppressor tone setup Used to set YES/NO of echo suppressor tone in each high-speed modulation system. Bit No. 0 0 1 V.33 1 1 : NO 0 : YES V.17 2 1 : NO 0 : YES V.29 3 1 : NO 0 : YES V.27 4 1 : NO 0 : YES 5-8 Not used YES (No for V.29 only) 0 0 1 1 1 28 1-3 Not used 0 0 0 4-6 CNG signal detection time (in TEL/FAX auto selection) Used to set the time for detection of the CNG signal of the remote machine before calling an external telephone from connection of the line when the FAX automatic selection is enable. When this item is set to a longer value, the mute time on the calling side becomes longer. Setting range: "Setting value + 2 sec" When, however, it is set to 0, the time is 0 sec. 7,8 Not used 0 Receive setup 0 0 0 0 29 1-5 FAX paper exit tray setting Used to specify the default output tray in the combination of each output system. The combinations of the output trays are as follows. In the case of the main unit only or the main unit without the manual feed tray and with the duplex tray, the output is always made from the center tray. Bit No. 0 Receive setup 0 0 0 0 Main unit + Manual Duplex 1 1:CENTER TRAY 0:LEFT TRAY Finisher + Duplex / Finisher 2 1:FINISHER TOP TRAY 0:LEFT TRAY Mail bin stacker + Duplex / Mail bin stacker 3 1:MAIL BIN TOP TRAY 0:LEFT TRAY Main unit + Saddle finisher + Duplex 4 1:CENTER TRAY 0:FINISHER TRAY Mail bin stacker + Saddle finisher 5 1:MAIL BIN TOP TRAY 0:FINISHER TRAY 6-8 Not used 0 0 0 30 1 Not used 2 Error reception in RTN reception 0 Used to set whether RTN signal reception is judged as an error or not. (Only in G3 mode) 1: RTN reception is not judged as an error. 0 Judges as an error 0: RTN reception is judged as an error. 3-4 Not used 0 0 5-8 ID (No.) setting (1st digit: When dial inputting or dialing) Used to set the ID No. when the PBX function is enabled. This setting is valid when "ID" is set in SW59-7-8.If the set value is outside the specified range, the default (0) is used. 0 0 0 0 AR-FX12 SIMULATIONS, FAX SOFTWARE SWITCH 6-35 0 Initial set up [06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 36 ページ 2004年10月26日 火曜日 午後3時44分 SW Bit No. No. Item 31 1-4 ID (No.) setting 2 (2nd digit: When dial inputting or dialing) Switch selection and function USA Used to set the ID No. when the PBX function is enabled. This setting is valid when "ID" is set in SW59-7-8.If the set value is outside the specified range, it is not used as an ID No. 0 Used to set the ID No. when the PBX function is enabled. This setting is valid when "ID" is set in SW59-7-8.If the set value is outside the specified range, it is not used as an ID No. 0 Initial value Key operator Not used Initial set up Not used Initial set up 0 0 0 5-8 ID (No.) setting 3 (3rd digit: When dial inputting or dialing) 0 0 0 32 1-8 Not used 0 0 0 0 0 0 0 0 33 1,2 Transmission cable amplitude equalizer Used to set whether the send level is changed by frequency or not when sending FAX signal. 1 2 0dB Bit No. 0 0 4dB 0 1 8dB 1 0 12dB 1 1 3-7 Not used 0 0dB 0 0 0 0 0 0 8 Paper selection when reception printing (LTR/A4) Used to set whether LTR is confirmed first of all in selection of paper for reception printing or paper that provides smaller reduction rate of A4 and LTR is selected. 0 Priority on LTR/A4 1: Priority on LTR 0: Priority on LTR/A4 reduction rate 34 1-7 Not used 0 0 0 0 0 0 0 8 Duplex reception print Used to set whether reception data are printed on duplex surfaces when printing FAX reception. 1: Duplex reception is printed. 35 1 Rotational print 2 Sub scan length judgment 3,4 Received data print condition setup 0 Rotational print 0 Priority on data length 0 00 Receive setup 0: Received data are rotated. Used to set whether priority is given to the width or the length when selecting the optimum paper in received data printing. 1: Priority on data width Not print 0: Duplex reception is not printed. Used to set whether rotation print is made or not when received data can be printed by rotating in FAX reception printing. 1: Received data are not rotated. 0 0: Priority on data length Used to set selection of the optimum paper for received data printing. Bit No. 3 4 Optimum size/Large size/reduction 0 0 Optimum size/Large size 0 1 Optimum size/Large size/Division 1 0 Optimum size/Large size/reduction 1 1 AR-FX12 SIMULATIONS, FAX SOFTWARE SWITCH 6-36 0 Receive setup [06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 37 ページ 2004年10月26日 火曜日 午後3時44分 SW Bit No. No. 35 5 Item Received document output setup Switch selection and function USA Initial value Used to set whether all received data are collectively printed after completion of all FAX reception or each page is printed after completion of reception of each page. 0 Collectively outputted Key operator 1: Each page is printed 0: Collectively printed after reception of each after completion of all page. FAX reception 6 Not used 7 Automatic reduction/ dispose setup 0 Used to set whether automatic reduction is made so that the received data can be printed on a page if reduced, when a document the size of which exceeds the printable limit but is within the magnification ratio setup range of automatic reduction is received. 0 Reduction 1 Dispose 0 90% Receive setup 1: Automatic reduction is not made and 0: Printed by data exceeding the printable limit are automatic disposed. reduction 8 Reduction/dispose Used to set whether the main scan width data are reduced or data on both setup when printing A3, edges are disposed without reduction when A3 width document is received and 11X 17 printed on 11x 17 inch paper. When set to "Reduction," the data are reduced by 94%. 1: Dispose 36 1-8 Setup of magnification ratio in automatic reduction 0: Reduction Used to set the percentage by which the received document is longer than the printable length when automatic reduction print is enabled. The setup range is 85 - 100% by binary input of N into "N x 1% + 85%."When set to outside the range, similar to the default value of 90%. 0 0 0 0 1 0 1 37 1,2 Reception size specification (Indicates reception capacity.) Used to set the reception allowable document width of the machine which is notified to the other party machine when receiving Bit No. By installed cassette 1 2 0 0 A4 width 0 1 B4(A4•B4) width 1 0 A3(A3•B4•A4) width 1 1 0 0 By installed cassette 0 A3 width 0 Follows the date format. 0 Added 0 Outside the Send setup document When using the installed cassette, the max. cassette size as follows : A5/5.5 x 8.5R size A4 width B5 size B4 width A4/8.5 x 11 size A3 width 8.5 x 13/8.5 x 14 A3 width B4 size B4 width 11 x 17 B4/A3 width (Switch by FAX soft SW) A3 size A3 width A3 width is used when no tray is set for Fax reception and printing and when the cassette is open in case of installed cassettes. 3 11 x 17 paper reception Used to set the reception allowable document width when 11 x 17 paper is width setup selected as FAX print paper. 1: B4(B4•A4) width 4 Date/sender print language selection Used to set the date and FAX No. print (depending on the destination) at the top of the document when transmitting. Date, FAX No. and fonts are switched. 1: For North America 5 Default date/sender print 0: Follows the date format. Used to set whether the date and sender information are added at the top of the transmitted document as default. 1:Not added 6 0: A3(A3•B4•A4) width 0:Added Date/sender information Used to set the print position of the date/sender information at the top of the print position setup transmitted document. 1: Top of document Send setup 0: Outside of document AR-FX12 SIMULATIONS, FAX SOFTWARE SWITCH 6-37 [06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 38 ページ 2004年10月26日 火曜日 午後3時44分 SW Bit No. No. 37 7 Item Page number print Switch selection and function Used to set whether the page number is added at the date/sender information print position or not. (Page number/Total page number in case of memory transmission) 1: Not added 8 1 2 NO (Not print) 0 0 NO (Not print) 0 1 Print (Always) 1 0 Only in an error (Print) 1 1 Used to set whether the communication speed during communication and the reception level during reception are displayed on the LCD or not. 1: Displayed on LCD 4-8 Time print (o'clock) on the communication report table Added Key operator Send setup 0 Used to set whether the protocol monitor (which is recognized by the FAX) for one communication is printed or not. When a new communication is made before printing the protocol monitor, the old protocol data are deleted. (Overwriting) Bit No. Line monitor display 0 Initial value 0: Added Not used 38 1,2 Protocol monitor 3 USA 0 NO 0 0 Not displayed 0 0 o'clock Initial setup 0 Not output Initial setup 0 0 min Initial setup 0 Not output Initial setup 0 Print 0 Not printed 0 Not printed. 0 Not output 0: Not displayed on LCD Used to set the time print (o'clock) when time is printed on the communication report table. The set range is 0 - 23 o'clock by binary input. If a value of 24 - 31 is inputted, it is set to 0 o'clock. 0 0 0 0 39 1 Communication report table printing at the specified time Used to set whether the communication report table is outputted at the specified time or not. Though time specification print is enabled, if the specified time is in the nighttime FAX mode, output is not made. 1: Communication report 0: Communication report table is printed at the table is not printed at specified time. the specified time. 2-7 Time print (min) on the communication report table Used to set the time print (min) when time is printed on the communication report table. The set range is 0 - 59min by binary input. If a value of 60 - 63 is inputted, it is set to 0 min. 0 0 0 0 0 8 Automatic print of communication report table at memory full Used to set whether the communication report table is automatically outputted or not when the number of send/receive items reaches 50 items. Print of total communication time on the communication report table Used to set whether the total communication time and the total number of pages are printed on the communication report table or not. Report output (when in receive rejection) <FAX only> Used to set whether the communication report is outputted or not when FAX receive is set to "receive reject." However, report output (in receive) must be set to "Not print." 1: Automatic print 0: Not print If the report is not outputted, the oldest data are overwritten. 40 1 2 1: Not print 0: The total time and the total number of pages are printed. 1: Printed 3 Sent document print in F Used to set whether part of the sent document is printed or not on the code communication communication report table in F code communication. The setup of SW41-1 and SW41-2 has priority over this setup. 1: Sent document is printed. 4 0: Not printed Report output (When canceling) 0: Sent document is not printed. Used to set whether the communication report table is outputted or not when transmission is canceled during transmission of document. 1: Communication report 0: Communication report table is printed. table is not printed. AR-FX12 SIMULATIONS, FAX SOFTWARE SWITCH 6-38 [06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 39 ページ 2004年10月26日 火曜日 午後3時44分 SW Bit No. No. 40 5 Item Report output (in confidential reception) <FAX only> Switch selection and function USA Used to set whether the communication report table (reception) is outputted or not in confidential reception. 0 Initial value Key operator Output Initial setup In case of an error Initial setup 1: Communication report 0: Communication report table is not printed. table is printed. 6-8 Not used 0 0 0 41 1,2 Send mode document content print (Report table) <FAX only> 3,4 Report output (transmission) <FAX only> Used to set whether part of a send document is printed on the communication report (send) or not in FAX send error. However, use the other soft switch to set whether the communication report is printed or not. Bit No. 1 0 0 Always print 0 1 In case of an error 1 0 In case of an error 1 1 Used to set the communication report table output after transmission (except for sequential broadcast, sequential polling, relay broadcast). 3 4 Print inhibited 0 0 All print 0 1 Only when transmission is failed 1 0 Only when transmission is failed 1 1 5,6 Report output Used to set the communication report table output after transmission (sequential broadcast, (sequential broadcast, sequential polling, relay broadcast). sequential polling, relay Bit No. 5 6 broadcast) Print inhibited 0 0 7,8 Report output (reception) <FAX only> All print 0 Only address to which transmission is failed 1 0 All print 1 1 0 Only when Initial setup transmission is failed 0 All print Initial setup Print inhibited Initial setup 1 1 1 Used to set the communication report table output in reception (except for confidential reception). Bit No. 0 2 Not print Bit No. 1 7 8 Print inhibited 0 0 All print 0 1 Only in case of an error 1 0 Print inhibited 1 1 42 1-3 Not used 0 0 0 0 0 4 F.A.S.T function Used to set the management function performed in FAX communication through the telephone line. 1: YES 0 NO 0: NO 5-7 Not used 0 0 0 8 V.34 mode function in manual communication Used to set Enable/Disable of V.34 mode function in manual communication. When, however, SW43-1 is set to "1:disable," V.34 mode is disabled though this switch is set to "0:enable." 1: V.34 mode function disable 43 1 V.34 mode function (When call out and polling) Enable 0 Enable 0: V.34 mode function enable Used to set Enable/Disable of V.34 mode function in the machine when sending. 1: V.34 mode function disable 0 0: V.34 mode function enable AR-FX12 SIMULATIONS, FAX SOFTWARE SWITCH 6-39 [06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 40 ページ 2004年10月26日 火曜日 午後3時44分 SW Bit No. No. 43 2 Item V.34 mode function (when call in) Switch selection and function Used to set whether V.34 mode is enabled or not as a capacity of the own machine when receiving (calling in). 1: V.34 mode function disable 3-6 V.34Symbol Rate Mask (when receiving) USA Initial value 0 Enable 0 3429 0: V.34 mode function enable Used to set Symbol Rate in reception of V.34 mode. When set to other than the below, it is set as the default (0101). Bit No. 1 3 4 5 6 0 2400 0 0 0 0 1 2400 0 0 0 1 2800/2400 0 0 1 0 3000/2800/2400 0 0 1 1 3200/3000/2800/2400 0 1 0 0 3429/3200/3000/2800/2400 0 1 0 1 7,8 Not used 0 0 44 1-4 V.34 mode transmission Used to set the communication speed (capacity) when transmitting in V.34 speed mode. The set range is 2400bps - 33600bps in the increment of 2400bps by binary input of N into "2400(bps) x N." When N is set to 0000, it is set to 2400bps. When set to 1111, it is set to 33600bps. When, however, set to 2400bps, SW451~6 must be disabled. When set to 33600bps, SW45-7 must be enabled "1". 5-8 V.34 mode reception speed 45 1 Used to set the communication speed (capacity) when receiving in V.34 mode. The set range is 2400bps - 33600bps in the increment of 2400bps by binary input of N into "2400(bps) x N." When N is set to 0000, it is set to 2400bps. When set to 1111, it is set to 33600bps. When set to 2400bps, however, SW433~6 must be set to 2400: "0000." When set to 33600bps, SW43-3~6 must be set to 3429: "0101." 2800 Symbol Rate Mask Used to set Enable/Disable of 2800Hz as Symbol Rate of V.34. in V.34 communication When set to Disable, 2800Hz is not selected. 1: Disable 2 Not used 3 3000 Symbol Rate Low Carrier setup in V.34 transmission Communication error sound setting when no response from the remote machine in FAX reception 1 0 0 Enable Enable 0 Enable 0 Enable 0 Enable 0 Enable 0 No error sound 0: Enable Used to set whether the speaker sound is made or not according to the communication error sound when the FAX signal cannot be received (when the remote machine is a telephone in no response) from the remote machine in FAX reception (call-in). 1: Error sound provided 0 0: Enable 3429 Symbol Rate Mask Used to set whether 3429Hz is used as Symbol Rate of V.34 or not. in V.34 transmission When set to Disable, 3429Hz is not selected. Valid only in transmission. 1: Disable 8 33600bps 1 0: Enable 3200 Symbol Rate High Used to set Enable/Disable of Low/High carrier when selecting 3000Hz as Carrier setup in V.34 Symbol Rate of V.34. When this is set to Disable, High of 3200Hz is not transmission selected. It is valid only in transmission. When both of Low/High are set to Disable, Symbol Rate=3200Hz is not selected. 1: Disable 7 1 0: Enable Used to set Enable/Disable of Low/High carrier when selecting 3000Hz as Symbol Rate of V.34. When this is set to Disable, Low of 3200Hz is not selected. It is valid only in transmission. 1: Disable 6 0 0: Enable 3000 Symbol Rate High Used to set Enable/Disable of Low/High carrier when selecting 3000Hz as Carrier setup in V.34 Symbol Rate of V.34. When this is set to Disable, High of 3000Hz is not transmission selected. It is valid only in transmission. When both of Low/High are set to Disable, Symbol Rate=3000Hz is not selected. 3200 Symbol Rate Low Carrier setup in V.34 mode 1 0 1: Disable 5 33600bps 1 0: Enable Used to set Enable/Disable of Low/High carrier when selecting 3000Hz as Symbol Rate of V.34.When this is set to Disable, Low of 3000Hz is not selected. It is valid only in transmission. 1: Disable 4 1 0: No error sound AR-FX12 SIMULATIONS, FAX SOFTWARE SWITCH 6-40 Key operator [06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 41 ページ 2004年10月26日 火曜日 午後3時44分 SW Bit No. No. 46 1 2 Item Primary channel return mode setup Switch selection and function USA Used to set the next state after completion of primary channel phase. 1: PPh signal send sequence 1 PPh signal 0 Continuous only 0: Sh signal send sequence Dial tone detection kind Used to set whether continuous or intermittent (repetition of ON/OFF) is detected as detection of the dial tone (DT) from the line switchboard. 1: Intermittent only Initial value 0: Continuous only 3-6 Not used 0 0 0 0 7,8 V.8 mode ANSam signal Used to set ANSam signal send time when sending ANSam signal in V.8 mode. send time Bit No. 7 8 3sec 0 0 4sec 0 1 5sec 1 0 6sec 1 1 47 1-8 Not used 0 4sec 1 1 0 0 1 0 0 1 1 48 1-3 Not used 0 1 0 4 Used to set the lower limit of detection time of ON/OFF when SW46-2 is set to Dial tone ON/OFF detection time lower limit "Continuous." (in continuous detection) 1: 300ms 0: 100ms 0 100ms 5 Dial tone ON/OFF detection time upper limit (in continuous detection) 0 700ms Used to set the upper limit of detection time of ON/OFF when SW46-2 is set to "Intermittent." 1: 400ms 0: 700ms 6-8 Not used 0 1 0 49 1-8 Dial number in tone pulse auto setting Used to set dial number (2 digits) in auto setting of telephone kind (DP/DTMF). Setting is made by BCD input. The set range is 0 ~ B. When set to outside the set range, the default value of 55 is applied to. 0 55 1 0 1 0 1 0 1 50 1-4 After sending CFR, dual Used to set the time of inhibition of both waiting (low speed and high speed) waiting is inhibited for after sending the CFR signal from the machine in the reception procedure other 1.6sec. than V.34. Bit No. 1 2 3 4 0ms 1 1 1 1 1600 0 0 0 0 0 0 0 0 Other value than the above: Set value x 200ms. 5-6 Not used 0 0 AR-FX12 SIMULATIONS, FAX SOFTWARE SWITCH 6-41 1600ms Key operator [06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 42 ページ 2004年10月26日 火曜日 午後3時44分 SW Bit No. No. 50 51 7 Item Setup of send/receive complete sound (buzzer length) 8 Not used 1 Voice answering send level to the line Switch selection and function USA Used to set the buzzer length from the speaker made after completion of FAX transmission and reception. Excluding when a communication error occurs. 1: 3sec 0 Initial value Key operator 1sec 0: 1sec 0 Used to set the voice answering volume to the line. Set to Large or Small with the hardware. 1: Small 0 Large 0: Large 2-7 Not used 1 0 0 0 0 0 8 Line monitor range Used to set the line monitor range when the line monitor function is used. When set to "Until NSF signal send/receive," monitoring is made until DCS or NSF signal is received. When set to "All," all are monitored until the line is disconnected. 1: All 52 1,2 Ringing sound volume Used to set the ringing sound volume in reception regardless of handset installation. The sound volume is available in the following four levels. Bit No. 1 2 0 0 Small 0 1 Medium 1 0 Large 1 1 Used to set the speaker volume in line monitoring. The volume is available in the following 4 levels. Bit No. Sound NO 5,6 Speaker volume when on-hook (Speaker volume when DTMF sending) Until NSF signal send/ receive 1 Medium Initial setup Medium Initial setup Medium Initial setup 0: Until sending/receiving NSF signal Sound NO 3,4 Line monitor sound volume setup 0 1 0 3 4 0 0 Small 0 1 Medium 1 0 Large 1 1 Used to set the speaker volume when the on-hook button is pressed. The volume is available in the following 3 kinds. Bit No. Medium 0 5 6 0 0 Small 0 1 Medium 1 0 Large 1 1 7,8 Not used 1 0 1 0 53 1,2 Transmission end sound Used to set the volume of transmission end sound from the speaker when FAX volume transmission is completed. The sound volume is available in the following 4 kinds. Bit No. Sound NO 1 2 0 0 Small 0 1 Medium 1 0 Large 1 1 AR-FX12 SIMULATIONS, FAX SOFTWARE SWITCH 6-42 0 0 Sound NO [06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 43 ページ 2004年10月26日 火曜日 午後3時44分 SW Bit No. No. 53 Item 3,4 Reception end sound volume Switch selection and function Used to set the volume of the FAX reception end sound from the speaker. The volume is available in the following 4 levels. However, "Medium" cannot be selected with the key operation. Bit No. Sound NO 5,6 Communication error end sound volume 0 1 1 0 Large 1 1 Used to set the volume of end sound from the speaker when a Fax communication is failed. The sound volume is available in the following 4 kinds. However, "Medium" cannot be selected with the key operation. 4 0 0 1 Medium 1 0 Large 1 1 Used to set the sound level of "Large" ringing sound (key operation setup) from the speaker. Including volume of Buzzer sounds (communication end sound, communication error sound). 7 8 Sound volume4 0 0 Sound volume5 0 1 Sound volume6 1 0 Sound volume7 1 1 Used to set the sound level of "Medium" ringing sound (key operation setup) from the speaker. Including volume of Buzzer sounds (communication end sound, communication error sound). Bit No. 1 2 Sound volume2 0 0 Sound volume3 0 1 Sound volume4 1 0 Sound volume5 1 1 Used to set the sound level of "Small" ringing sound (key operation setup) from the speaker. Including volume of Buzzer sounds (communication end sound, communication error sound). Bit No. 5,6 Line monitor sound volume "Large" setup 3 0 Small Bit No. 3,4 Ringing sound volume "Small" setup 4 0 Medium Bit No. 54 1,2 Ringing sound volume "Medium" setup 3 0 Small Sound NO 7,8 Ringing sound volume "Large" setup USA 3 0 0 Sound volume1 0 1 Sound volume2 1 0 Sound volume3 1 1 Used to set the sound level of "Large" line monitor sound (key operation setup) from the speaker. 5 6 Sound volume4 0 0 Sound volume5 0 1 Sound volume6 1 0 Sound volume7 1 1 7,8 Line monitor sound Used to set the sound level of "Medium" line monitor sound (key operation volume "Medium" setup setup) from the speaker. Bit No. 0 Operation setup Small Operation setup 1 1 0 1 0 1 0 7 8 Sound volume2 0 0 Sound volume3 0 1 Sound volume4 1 0 Sound volume5 1 1 AR-FX12 SIMULATIONS, FAX SOFTWARE SWITCH 6-43 1 0 1 0 Key operator Small 1 Sound volume 6 Sound volume 4 Sound volume 2 4 Sound volume0 (Sound NO) Bit No. 0 Initial value Sound volume 6 Sound volume 4 [06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 44 ページ 2004年10月26日 火曜日 午後3時44分 SW Bit No. No. Item 55 1,2 Line monitor sound volume "Small" setup Switch selection and function USA Used to set the sound level of "Small" line monitor sound (key operation setup) from the speaker. 1 Bit No. 1 0 Initial value Key operator Sound volume 2 2 Sound volume0 (Sound NO) 0 0 Sound volume1 0 1 Sound volume2 1 0 Sound volume3 1 1 3,4 On-hook speaker sound Used to set the level of "Large" sound volume from the speaker when on-hook. volume "Large" setup Bit No. 3 4 Sound volume4 0 0 Sound volume5 0 1 Sound volume6 1 0 Sound volume7 1 1 5,6 On-hook speaker sound Used to set the level of "Medium" sound volume from the speaker when onvolume "Medium" setup hook. Bit No. 5 6 Sound volume2 0 0 Sound volume3 0 1 Sound volume4 1 0 Sound volume5 1 1 7,8 On-hook speaker sound Used to set the level of "Small" sound volume from the speaker when on-hook. volume "Small" setup Bit No. 7 8 Sound volume0 (Sound NO) 0 0 Sound volume1 0 1 Sound volume2 1 0 Sound volume3 1 1 56 1-7 Not used 1 0 1 0 1 0 Sound volume 6 Sound volume 4 Sound volume 2 0 1 0 0 0 0 0 8 Resend when no Used to set whether recall is made by judging no response of the other party as response from the other an error in transmission. No response of the other party is caused when dial is party completed and the other party is a telephone. 0 Recall Differs depending on the destination. Used to set the recall interval in a communication error or busy state in sending. The set range is 0 - 15min in the increment of 1min by binary input. When set to 0, the default value of 3min is applied to. 0 3 min Send setup 5-8 Number of times of Used to set the number of times of recall in communication error in sending. recall in communication The set range is 0 - 15 times by binary input. When set to 0, the default value of error 1 is applied to. The set range differs depending on the destination. 0 Once Send setup 2times Send setup 3 min Send setup Recall Send setup 1: Not recall 57 1-4 Recall interval in busy state 58 1-4 Number of times of recall in busy 5-8 Recall interval in communication error 59 1 Not used 2 Recall allow in busy 0: Recall 0 1 1 0 0 1 Used to set the number of times of recall when the other party's line is busy or the other party does not receive. The set range is 1 - 14 times of 1min by binary input. When 0 is selected, it is set to the default (2 times). The set range differs depending on the destination. 0 Enable other than Japan, North America, Australia, and New Zealand. Used to set the time interval of recalling in case of a communication error. Setting can be made in the increment of 1 min by binary input. If a value outside the setting range for each destination is entered, the initial value is set. 0 0 1 0 0 1 1 1 Used to set whether recall is made or not when the other party is busy or does not receive in transmission. 1: Recall 0: Not recall AR-FX12 SIMULATIONS, FAX SOFTWARE SWITCH 6-44 1 [06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 45 ページ 2004年10月26日 火曜日 午後3時44分 SW Bit No. No. 59 3 Item Recall allow in communication error Switch selection and function USA Used to set whether recall is made or not when a communication error occurs in transmission. 1 Recall 0 500ms 0 00 1: Recall 4 Lower limit of dial tone ON detection time Key operator Send setup 0: Not recall Used to set the dial tone and the minimum required time for detection of the dial tone when detecting the dial tone. 1: 250ms 5,6 DP dial pulse number process Initial value 0: 500ms Used to set the pulse number when delivering dial pulse. Since the pulse number differs in different countries, change the setup according to necessity. Bit No. 5 0 6 NORMAL (Pulse=DIAL, 10=0) 0 0 EXTEND (Pulse=DIAL+1) 0 1 REVERSE (Pulse=10-DIAL) 1 0 7,8 Not used 0 0 60 1-8 Interval from the completion of communication to the next call Used to set the interval from the completion of communication to the next call. The set range is 1 - 255sec by binary input. When 0 is selected, it is set to the default (10sec). 0 10sec 0 0 0 1 0 1 0 61 1-8 Not used 0 0 0 0 1 0 0 0 62 1,2 Dial call wait time Used to set the wait time for dial call after connection of the line in automatic dial call. Bit No. 1 0 3.5sec 0 2 3.5sec 0 0 4sec 0 1 5sec 1 0 6sec 1 1 3,4 Not used 0 5,6 Tone/Pulse default setup Used to set tone pulse default. (Dial ringing signal Bit No. setup) 10PPS 1 0 5 6 0 0 20PPS 0 1 TONE 1 0 TONE 1 1 TONE Initial setup 40ms Adjustment value 60ms Adjustment value 0 When set to 01 in other than Japan, the default of TONE is applied to. 7,8 Not used 0 0 63 1-4 Make time (10PPS) setup Used to set the make time when dialing at 10PPS. The set range is 0 - 15 by binary input of N into "N + 29ms" (29ms - 44ms). 1 0 1 1 5-8 Break time (10PPS) setup Used to set the break time when dialing at 10PPS. The set range is 0 - 15 by binary input of N into "N +56ms" (56 - 71ms). 0 1 0 0 AR-FX12 SIMULATIONS, FAX SOFTWARE SWITCH 6-45 [06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 46 ページ 2004年10月26日 火曜日 午後3時44分 SW Bit No. No. Item 64 1-4 Minimum pause time (10PPS) setup Switch selection and function USA Used to set the minimum pause time when dialing at 10PPS. The set range is 0 - 15 by binary input of N into "N x 10ms + 800ms" (800 950ms). 0 Initial value Key operator 800ms Adjustment value 3 Adjustment value 2dB Adjustment value 0 0 0 5-8 Not used 0 0 0 0 65 1-8 Not used 1 0 0 0 1 0 0 0 66 1-4 Reserved 0 0 0 0 5-8 DTMF send level (high group) setup Used to set the DTFM signal send level of high group and low group in the unit of 1dB. 0 0 1 1 67 1-4 DTMF send level Used to set the difference between the high level and the lower level of DTFM (High group-Low group) signal in the unit of 0.5dB. setup Bit No. 1 2 3 4 Bit No. 1 2 3 4 2.0dB 0 0 0 0 -2.0dB 1 0 0 0 2.5dB 0 0 0 1 -1.5dB 1 0 0 1 3.0dB 0 0 1 0 -1.0dB 1 0 1 0 3.5dB 0 0 1 1 -0.5dB 1 0 1 1 4.0dB 0 1 0 0 0dB 1 1 0 0 4.5dB 0 1 0 1 0.5dB 1 1 0 1 5.0dB 0 1 1 0 1.0dB 1 1 1 0 5.5dB 0 1 1 1 1.5dB 1 1 1 1 5-8 Reserved 0 0 0 0 0 0 0 0 68 1-5 DTMF signal send time Used to set the DTFM signal send time when DTFM signal is transmitted. The set range is 0 - 31 by binary input of N into "10ms x N" (70ms - 310ms). If set to outside the set range, it is set to the default (110ms). 0 110ms 1 0 1 1 6-8 Not used 0 0 0 69 1-8 DTMF minimum pause time setup Used to set the minimum pause time between DTMF signals when DTMF signal is transmitted. The set range is 0 - 255 by binary input of N into "1ms x N" (50ms - 255ms).If set to outside the set range, it is set to the default (120ms). 0 1 1 1 1 0 0 0 AR-FX12 SIMULATIONS, FAX SOFTWARE SWITCH 6-46 120ms Adjustment value [06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 47 ページ 2004年10月26日 火曜日 午後3時44分 SW Bit No. No. Item 70 1-4 Pause time setup (between dialing) Switch selection and function USA Used to set the pause time of every pause input in dialing. The set range is 0 15 by binary input of N into "1sec x N" (1sec - 15sec). When 0 is selected, it is set to the default (2sec). 0 Initial value 2sec 0 1 0 5 Detection of line current Used to set whether dialing is made or not after detection of the line current when dialing when connecting the line in automatic dialing. When it is set to YES and the line current is not detected, dialing is not made. 1: NO 6 Dial tone detection 8 Used to set whether the dial tone is detected or not in automatic dialing. When it is set to YES and the dial tone is not detected, dialing is not made. 0 NO 0 5sec 0 Not detected 1 1 245Hz ~ 650Hz 0 Detected 0 2 pulses 0: NO Dial tone monitoring time Used to set the judgment time for detection of dial tone. FAX calling CNG detection Used to set whether CNG from the other party is detected or not when FAX calling. When it is set to YES and CNG is detected, the line is judged as busy. 1: 17sec 0: 5sec 1: CNG detection YES 71 1,2 Frequency range setup for detection of DT/BT NO 0: YES 1: YES 7 1 0: CNG detection NO Used to set the frequency range for detection of dial tone and busy tone. When dial tone or busy tone is erroneously detected, change the setting. 4 5 245Hz ~ 650Hz (North America, CTR21) Bit No. 1 1 360Hz ~ 440Hz (Australia, German) 1 0 420Hz ~ 680Hz 0 1 Modem fixed (Japan, UK, France, Sweden) 0 0 ( ): Theoretically proper area 3 Busy tone detection Used to set whether the busy tone signal is detected or not during automatic dialing or ringing of pseudo-call of an external telephone. 1: Busy tone is not detected. 0: Busy tone is detected. 4,5 Busy tone detection cycle 6,7 DT/BT detection level Used to set the number of pulses for judgment of busy tone signal detection. Bit No. 4 5 2Pulse 0 0 4Pulse 0 1 6Pulse 1 0 10Pulse 1 1 Used to set the minimum detection level for judgment of dial tone and busy tone detection. If a signal level is lower than this setup, it is ignored. Bit No. 8 None-detection time of busy tone OFF 6 7 -43dB 0 0 -35dB 0 1 -33dB 1 0 -30dB 1 1 Used to set none-detection time of busy tone OFF. Change the setup when busy tone ON section is abnormal due to noises. 1: 300ms 0 0 -43dB 0 0 100ms 0 250ms 0: 100ms 72 1,2 Lower limit of busy tone Used to set the lower limit of detection time (ON time) of busy tone signal detection time frequency. To count a busy tone signal as 1 pulse, it must be detected for more (ON time) than the set time. 1 2 250ms Bit No. 0 0 150ms 0 1 450ms 1 0 350ms 1 1 For CTR21, 150ms. AR-FX12 SIMULATIONS, FAX SOFTWARE SWITCH 6-47 0 Key operator Initial setup [06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 48 ページ 2004年10月26日 火曜日 午後3時44分 SW Bit No. No. Item Switch selection and function USA 72 3,4 Upper limit of busy tone Used to set the upper limit of detection time (ON time) of busy tone signal detection time frequency. To count a busy tone signal as 1 pulse, it must be detected for less (ON time) than the set time. 3 4 750ms Bit No. 0 0 650ms 0 1 1000ms 1 0 2850ms 1 1 5,6 Lower limit of busy tone Used to set the lower limit time of OFF period when detecting the frequency of OFF detection time busy tone signal. Only when OFF signal of busy tone signal is detected for more than this lower limit time, it is counted as one pulse. 5 6 250ms Bit No. 0 0 150ms 0 1 450ms 1 0 350ms 1 1 7,8 Upper limit of busy tone Used to set the upper limit of OFF time when detecting the busy tone signal OFF detection time frequency. If the busy tone signal is detected over this setup, it is not counted as one pulse. 7 8 750ms Bit No. 0 0 650ms 0 1 1000ms 1 0 2850ms 1 1 73 1-8 Not used 0 Initial value 750ms 0 0 250ms 0 0 750ms 0 0 1 0 1 0 1 1 0 74 1-8 Not used 0 0 0 0 1 1 0 1 75 1-4 Lower limit of call signal Used to set the lower limit of ON time for detection of pulses (number of times) ON time of call signal (CI). When CI signal ON is detected for more than the set time, it is counted as 1 pulse. The lower limit of ON time can be set in the range of 150 - 300ms by binary input of N (0 - 15) into "N x 10 + 150ms." This switch substitutes for the sine wave of CI detection. 0 5-8 Upper limit of call signal Used to set the upper limit of ON time for detection of pulses (number of times) ON time of call signal (CI). When CI signal ON is detected for less than the set time, it is counted as 1 pulse. The upper limit of ON time can be set in the range of 3000 - 4500ms by binary input of N (0 - 15) into "N x 100 + 3000ms." 0 76 1-4 Lower limit of call signal Used to set the lower limit of call signal (CI) OFF time for detection of pulses OFF time (number of times). When a CI signal OFF is detected for mote than the set OFF time, it is judged as 1 pulse. The lower limit of OFF time can be set in the range of 0 - 150ms by binary input of N (0 - 15) into "N x 100ms." 0 AR-FX12 SIMULATIONS, FAX SOFTWARE SWITCH 6-48 150ms 0 0 0 3000ms 0 0 0 1 1 1 700ms Key operator [06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 49 ページ 2004年10月26日 火曜日 午後3時44分 SW Bit No. No. Item Switch selection and function USA 76 5,6 Upper limit of call signal Used to set the upper limit of wait time from pulse (number of times) detection OFF time of a call signal (CI) to the next CI signal pulse. When the next CI signal pulse is not detected within the set range, the number of calls until then is cleared. Bit No. 5 0 Initial value Key operator 5sec 0 6 5sec 0 0 10sec 0 1 15sec 1 0 20sec 1 1 7,8 Not used 0 0 77 1-4 Call signal OFF no detection time 5-8 Distinctive ring Used to set the time to ignore OFF signal and regard as ON time continuing after detection of call signal (CI) ON. This is to process PBX call signal (Ring, Ring) as one call signal. The set range is 0 - 150ms in the increment of 100ms by binary input. 0 Used to set whether FAX call-in is made by distinctive ring or not. When CI signal of other pattern than the set pattern is detected, auto call-in is not made. 0 Bit No. OFF 5 6 7 8 0 0 0 0 STANDARD 0 0 0 1 Pattern 1 1 0 0 0 Pattern 2 0 1 0 0 Pattern 3 1 1 0 0 Pattern 4 0 0 1 0 Pattern 5 1 0 1 0 ON (Australia) 0 1 1 0 ON (Newzealand) 1 1 1 0 78 1-8 Not used 1 0 0 0 0 0 0 0 0 0 0 0 0 79 1-8 Not used 0 0 0 0 0 0 0 0 80 1-8 Not used 0 0 0 0 0 0 0 0 AR-FX12 SIMULATIONS, FAX SOFTWARE SWITCH 6-49 600ms 1 OFF Initial setup [06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 50 ページ 2004年10月26日 火曜日 午後3時44分 SW Bit No. No. From 81 To 100 Item Switch selection and function USA Not used Initial value 0 0 0 0 0 0 0 0 101 1 Setup of text print in mail receive without attached file Used to set whether the mail text is printed or not when the received mail has no attached file. 1: Mail text is printed. 0 Not print 0: Mail text is not printed. 2-5 Not used 1 0 0 0 6 Used to set the serve check (MDN) function. <in iFAX send> 7 Not used 8 Mail receive process (When Content-XCJAWNETFAX field is not received.) Used to set whether the MDN request field is added to the mail field or not in iFAX mail send. 1: Not request 1 Not request 0: Request 0 Used to set whether the mail text is printed or not when "Content-XCJAWNETFAX" is not included in the mail field in iFAX mail send. However, serve check respond mails are excluded. 1: Mail text is printed. 0 Not print 0: Mail text is not printed 102 1,2 Not used 1 1 3 iFAX resolution type Used to set the scan resolution type in iFAX send. 1: Metric (mm) series 0 Inch series 0: Inch series 4-6 Not used 1 1 0 7 Content-XCJAWNETFAX field addition (In iFAX send) Used to set whether "Content-X-CJ"WNETFAX" is added to the mail field or not in iFAX send. By adding this field, printing of the mail text on the iFAX receive side can be inhibited. (However, this function is valid only when the iFAX receive side supports this field.) 1: IGNORE is added 8 3,4 Standard file format setting (File type) (Default) Not added 0: The field is not added Not used 103 1,2 Standard file format setting (Compression type) (Default) 0 0 Used to set the default of the coding system in E-mail/FTP send. Bit No. 1 2 NONE 0 0 MMR 0 1 MMR 1 0 MH 1 1 Used to set the default of the file format in E-mail/FTP send. Bit No. 0 0 1 2 PDF 0 0 TIFF 0 1 PDF 1 0 PDF 1 1 5,6 File compression type in Used to set the file compression type in broadcast including the remote side of broadcast (Including the Scan to E-mail. remote side in Scan to Bit No. 1 2 E-mail) MH 0 0 MMR 0 1 MR 1 0 MH 1 1 MR does not function. AR-FX12 SIMULATIONS, FAX SOFTWARE SWITCH 6-50 MMR 1 PDF 0 1 1 MH Key operator [06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 51 ページ 2004年10月26日 火曜日 午後3時44分 SW Bit No. No. 103 7 8 Item Switch selection and function Nighttime FAX mode setting <When iFAX receive setting is not made> Used to set whether the minimum low power consumption mode is set or not when the right power switch is turned off. However, this function is valid only when iFAX receive setting is not made. Display setting in NW trouble (CE-00, CE-01) Used to set whether the operation panel is displayed or not when a network trouble occurs in NIS card installation. 1 Initial value 0 Enters the nighttime FAX mode 0 Trouble display 0 Enters the pseudonighttime mode. 1: Not enter the nighttime 0: Enters the nighttime FAX mode. FAX mode. 1: Trouble display is not made. 104 USA 0: Trouble display is made. Pseudo-nighttime mode Used to set whether the minimum low power consumption mode is set or not setting <When iFAX when the right power switch is turned off. However, this function is valid only receive setting is made> when iFAX receive setting is made. 1: Not enter the pseudonighttime mode. (Enters the nighttime mode.) 0: Enters the pseudonighttime mode. (Not enter the nighttime mode.) 2-8 Not used 0 0 0 0 0 0 0 105 1-8 Not used 0 0 0 0 0 0 0 0 106 1-4 The number of resend in Used to set the number of resend in NG of serve check respond in iFAX send iFAX communication with serve check request. The setting range is 0 - 15 times by binary input. error (Setting in NG in When set to "0," no resend is made. serve check request respond) 5 iFAX date, sender’s name print language select <Format> Used to set the date and sender’s name format in iFAX send. 1: North America format 0 1 0 0 0: Follows the date format. 6-8 Not used Twice 0 Follows the date format. 0 0 1 107 1-5 Not used 0 0 0 0 0 6 Report output (receive reject) <iFAX only> Used to set whether the communication report is outputted or not in "Receive reject" of iFAX receive. However, this function is valid only when the report output (in iFAX receive) is set to "Not print." 1: Output 0 Not output 0: Not output 7 Not used 0 8 Switch from the image Used to set whether the image send display is switched to the copy display or send display to the copy not. display 1: Switch 0: Not switch 1 AR-FX12 SIMULATIONS, FAX SOFTWARE SWITCH 6-51 Switch Key operator [06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 52 ページ 2004年10月26日 火曜日 午後3時44分 SW Bit No. No. Item Switch selection and function USA 108 1-8 Not used Initial value Key operator 0 0 0 0 0 0 0 1 109 1 Not used 2-6 iFAX paper exit tray setting 0 Used to specify the default output tray in the combination of each output system. The combinations of the output trays are as follows. In the case of the main unit only or the main unit without the manual feed tray and with the duplex tray, the output is always made from the center tray. Bit No. 0 iFAX Receive setup 0 0 0 0 Main unit + Manual Duplex 2 1:CENTER TRAY 0:LEFT TRAY Finisher + Duplex / Finisher 3 1:FINISHER TOP TRAY 0:LEFT TRAY Mail bin stacker + Duplex / Mail bin stacker 4 1:MAIL BIN TOP TRAY 0:LEFT TRAY Main unit + Saddle finisher + Duplex 5 1:CENTER TRAY 0:FINISHER TRAY Mail bin stacker + Saddle finisher 6 1:MAIL BIN TOP TRAY 0:FINISHER TRAY 7,8 Not used 0 0 110 1-8 Not used 0 0 0 0 0 0 0 0 111 1-3 Setting of the number of Used to set the number of resend when an error occurs with the FTGP server re-backup in FTP back- which was set in FTP backup of iFAX receive data. The set range is 0 - 7 times up by binary input. When set to "0," re-backup is not performed. 4-8 Not used 0 1 1 0 0 0 0 0 From 112 To 120 Not used 0 0 0 0 0 0 0 0 AR-FX12 SIMULATIONS, FAX SOFTWARE SWITCH 6-52 3 times [07]MACHINEOPERATION.fm 1 ページ 2004年10月26日 火曜日 午後3時45分 [7] MACHINE OPERATION 1. Key operator program Set value(Default) KEY OPERATOR PROGRAM Engine section LCD Operation Default display setting. settings Fax default settings [ADDRESS BOOK] (ABC)/ [ADDRESS BOOK] (Group)/ [FAX]/ [E-MAIL/FTP] (when the network scanner option is installed)/ [INTERNET-FAX] (when the network scanner option is installed)/ [SWITCH AUTOMATICALLY TO COPY MODE SCREEN] The number of direct address/sender keys displayed setting 6*/8/12 (When the network scanner option is installed, the selections are 6 and 9.) Must input next address key at broadcast setting omit*/not omit The number of file name/subject keys displayed setting*1 3/6 Initial resolution setting standard*/fine/fine(half tone)/super fine/ super fine(half tone)/ultra fine/ ultra fine(half tone) Scan complete sound setting Low/High/Off Default exposure settings Auto*/Manual Fax own number and name set Dial mode setting Tone*/Pulse Auto wake up print Enable*/ Disable Pause time setting Speaker volume settings 1,2* ~ 15sec Speaker Low/Medium*/High Ringer volume Low/Medium*/High /Off Line monitor Low/Medium*/High /Off Fax receive Low/Medium*/High /Off Fax comm error Original print on transaction report Remote reception number setting*2 Transaction report print select setting Low/Medium*/High /Off Enable*/ Disable / Print out error report only 0 ~ 5* ~ 9 Single sending Print out all report/Print out error report only*/ No printed report Broadcasting Print out all report*/Print out error report only/ No printed report Receiving Print out all report/Print out error report only/ No printed report* Confidential reception Print out notice page*/Not print out notice page Activity report print select setting Fax send settings *1 *2 *3 Auto print at memory full Yes/No* Print daily at designated time Yes (hour/minute)/No* ECM*3 Enable*/ Disable Distinctive ring detection Pattern1 ~ 6/OFF* Disable of fax number direct entry Enable*/ Disable Auto reduction sending setting Enable*/ Disable Rotation sending setting Enable*/ Disable Printing page number at receiver Enable*/ Disable Call timer at memory sending 30/45*/60sec Date/own number print position setting Outside the original image*/Inside the original image Recall in case of line busy Disable / Enable (recall:1/2* - 14time interval:1 - 3*- 15min) Recall in case of communication error Disable / Enable (recall:1/2* - 14time interval:1 - 3* - 15min) Quick on line sending Enable*/ Disable When the network scanner option is installed When extension phone is connected This setting is only effective if the other machine is a G3 machine that supports ECM AR-FX12 MACHINE OPERATION 7-1 Remark [07]MACHINEOPERATION.fm 2 ページ 2004年10月26日 火曜日 午後3時45分 Set value(Default) KEY OPERATOR PROGRAM Fax receive settings Engine section LCD Auto receive reduce setting Enable*/ Disable Number of calls in auto reception 0, 1, 2* ~ 15 Duplex reception setting*4 Enable/ Disable* Print style setting Print actual size cut off disabled/ Print actual size cut off enabled/Auto size select* Remark Set the telephone number for data forwarding Fax output tray setting*5 Anti junk fax setting Enable/Disable* Fax polling Fax polling security security Passcode number setting Allowed/Not allowed* *4 When the duplex module option is installed *5 The trays that can be selected will vary depending on what peripheral devices have been installed. 2. Originals that can be faxed A. Original sizes Minimum original size Using the automatic document feeder Using the document glass 8-1/2" (width) x 5-1/2" (length) (A5: 210 mm (width) x 148 mm (length)) 5-1/2" (width) x 8-1/2" (length) (A5R: 148 mm (width) x 210 mm (length)) Maximum original size 11" (width) x 3-1/2" *(length) (297 mm (width) x 800 mm (length)) 11" (width) x 17" (length) (297 mm (width) x 431.8 mm (length)) NOTE Originals that are not a standard size (5-1/2" x 8-1/2", 8-1/2" x 11", 8-1/2" x 11"R, 8-1/2" x 14", 11" x 17", A5, B5, B5R, A4, A4R, B4, A3) can also be faxed. B. Automatic reduction of faxed document If the size (width) of the faxed document is greater than the receiving machine's paper size, the size will be automatically reduced. Faxed document width Receiving machine's paper width Reduced size Ratio (Area ratio) 11" x 17" (A3) 8-1/2" x 14" (B4) 8-1/2" x 14" (B4) 1 : 0.64 (1 : 0.78) 11" x 17" (A3) 8-1/2" x 11" (A4) 8-1/2" x 11"R (A4R) 1 : 0.5 (1 : 0.5) A document can also be faxed without reducing its size. In this case, the left and right edges will not be transmitted. AR-FX12 MACHINE OPERATION 7-2 [07]MACHINEOPERATION.fm 3 ページ 2004年10月26日 火曜日 午後3時45分 3. Own number sending 4. Quick On-line This function prints the date, time, your programmed name, your programmed fax number, and the transmitted page number at the top center of each page that you fax. All pages that you fax include this information. When you use the automatic document feeder to send a multi-page document and there are no previously stored jobs waiting or in progress (and the line is not being used), the machine dials the destination after the first page is scanned and begins transmitting scanned pages while the remaining pages are being scanned. This transmission method is called Quick On-line. The messages SCANNING ORIGINAL and SENDING both appear until scanning of the final page is completed. If the receiving party is busy, the transmission will switch to a memory transmission. Example of fax page printed out by the receiving machine OCT-10-2003-FRI 03:00 PM <1> SHARP PLANNING DIV. FAX No. 0666211221 <2> <1> Date and time: <2>Own name: <3>Own fax number: <4> Transmitted page number: <3> P. 001/001 <4> The date and time, and the font used to print the date and time, are set in the custom settings. programmed with the key operator program. programmed with the key operator program. 3-digit number appearing in the format, "page number/total pages" (only the page number appears if you use manual transmission or Quick On-Line transmission). If desired, you can use the key operator program to omit the page number. A. Position of sender's information The key operator program can be used to select whether the sender's information is added outside the original data or inside the data. The initial factory setting is outside the data. NOTES •The machine is initially set (factory setting) to perform Quick On-line transmission. If desired, you can turn off this function with the key operator program. •When a document is transmitted using the following methods, the job will be stored in memory (Quick On-line transmission will not be performed): <1>Sending from the document glass <2>Broadcast transmission <3>Timer transmission <4>2 in 1 <5>Card shot <6>Job build <7>F-code transmission Length of transmitted data Length of scanned data Direction of transmission Outside scanned data None of the transmitted image is cut off; however, the transmitted data is longer than the scanned data, and thus when both the sender and the receiver use the same size of paper, the printed fax may either be reduced or split up and printed on two pages. Length of transmitted data Length of scanned data Direction of transmission Inside scanned data The top edge of the scanned data will be cut off by the sender's information; however, when both the sender and the receiver use the same size of paper, the printed fax will neither be reduced nor split up and printed on two pages. AR-FX12 MACHINE OPERATION 7-3 [07]MACHINEOPERATION.fm 4 ページ 2004年10月26日 火曜日 午後3時45分 5. Trouble codes * MAIN SUB F6 Only the FAX-related codes are extracted. 97 A. Details of trouble codes Content FAX-BOX incompatibility trouble The FAX-BOX PWB is not one for the ARFX12(FAX detection). Details The Modem controller PWB of the FAX-BOX is not for the AR-FX12. Cause Because the FAX-BOX modem controller PWB information (hard detection) is not for the AR-FX12. Check & Remedy Check the FAX-BOX modem controller PWB. Replace it with a modem controller PWB for the AR-FX12. Content Abnormal combination of the FAX-BOX destination information and the machine destination information Details Abnormal combination of the FAX-BOX destination information and the machine destination information MAIN SUB F6 00 01 04 20 F6 21 Content Communication trouble (ICU detection) between ICU and FAX. Details Communication establishment error/Fleming/ Parity/Protocol error. Cause Slave unit PWB connector disconnection. Harness abnormality between slave unit PWB and ICU PWB. Slave unit PWB mother board connector pin breakage. Slave unit ROM abnormality/No ROM/ Reverse insertion of ROM/ROM pin breakable. 98 Check & Remedy Check connector harness between slave unit PWB and ICU PWB. Check grounding of machine. Check slave unit PWB ROM. Cause Combination between the destination information saved in the EEPROM on the FAX-BOX and the machine destination information (set with SIM26-6) is abnormal. Content FAX expansion flash memory abnormality (ICU detection). Check & Remedy Details The Flash memory could not be deleted. Check the FAX-BOX destination. Check the machine destination setup (SIM26-6). Use the proper combination of the machine and the FAX-BOX. Content FAX board EEPROM read/write error Details EEPROM access error (read/write) Cause EEPROM trouble FAX PWB EEPROM access circuit trouble Check & Remedy When replacing the EEPROM, use SIM72-1 to write the default value and adjust with SIM66-4/5 (Signal send level) and SIM66-14/ 15/16 (Dial text). Note that all the soft switches are reset to the initial values. If the PWB is replaced, the adjustments are not required. Content FAX Battery abnormality (on the ICU PWB) FAX write protect cancel. Detail FAX Backup SRAM battery voltage fall Details The write protect DIP switch on the ICU PWB is released (canceled). Cause Battery life Battery circuit abnormality Cause The FAX write protect DIP switch is set to the FAX write enable position. FAX PWB trouble. Check and Check that the battery voltage is about 2.5V remedy or above. Check the battery circuit. Check & Remedy Check the write protect DIP switch on the ICU PWB. Replace the FAX PWB and the ICU PWB. Content Abnormal combination of the TEL/LIU PWB and the FAX soft switch. Details Abnormal combination of the TEL/LIU PWB and the FAX PWB information (soft switch). The TEL/LIU PWB is not a new one for a new MDMC PWB. Cause The Flash memory could not be deleted. Check & Remedy Check the Flash memory for saving the FAX images. Clear the Flash memory with SIM66-10. Content FAX modem operation abnormality. Details FAX PWB modem chip operation abnormality. Cause SW101 on the FAX PWB tries to operate normally on the boot side. Operation trouble of the Modem chip on the FAX PWB Check & Remedy Set SW101 on the FAX PWB to the other side than the BOOT side, and supply power again. Content Cause Erroneous destination of the installed TEL/ LIU PWB. Erroneous FAX PWB information (soft switch). The TEL/LIU is not a new one. Abnormal TEL/LIU PWB. Check & Remedy Check the destination of the TEL/LIU PWB. Check the FAX PWB information (soft switches). Replace the TEL/LIU PWB with a new one. Replace the TEL/LIU PWB. F7 U1 01 01 02 Content RTC read abnormality (common with FAX, on ICU PWB) Details The value read from RTC on ICU PWB is [EE]h (abnormal). Cause RTC circuit abnormality Battery voltage fall Battery circuit abnormality Check & Remedy Set the time again with key operation, and check that time advances properly. Check RTC circuit. Check that battery voltage is about 2.5V or above. Check battery circuit. AR-FX12 MACHINE OPERATION 7-4 [07]MACHINEOPERATION.fm 5 ページ 2004年10月26日 火曜日 午後3時45分 MAIN SUB U2 00 22 23 50 Content EEPROM read/write error (ICU). Details Write error to EEPROM. Cause EEPROM trouble. Installation of EEPROM which is not initialized. ICU PWB EEPROM access circuit trouble. Check & Remedy Check that the EEPROM is properly set. To save the counter data/adjustment values, make notes of the counter/adjustment values with the simulation. Cancel the U2 trouble with SIM16. Replace the ICU PWB. Content SRAM memory check sum error (ICU). Details SRAM memory check sum error in the MFPC section. Cause SRAM trouble. Hung up of the control circuit caused by noises. ICU PWB SRAM access circuit trouble. Check & Remedy Initialize the communication management table registered in the SRAM and the FAX soft switches. Registered contents are deleted. Register the deleted contents again. Cancel the U2 trouble with SIM16. Replace the ICU PWB. Content SRAM memory individual data check sum error (ICU). Details MFPC section SRAM memory individual data check sum error (Communication management table, sender registration data, etc). Cause SRAM trouble. Hung up of the control circuit caused by noises. ICU PWB SRAM access circuit trouble. Check & Remedy Turn OFF/ON the power to automatically initialize the data related to the contents where a check sum error occurred. Registered contents are deleted. Register the deleted contents again. Cancel the U2 trouble with SIM16. Replace the ICU PWB. Content HD section individual data check sum error (ICU). Details MFPC section HD individual data check sum error (One-touch, group, program, etc). Cause Write/read error from/to HD. Hung up of the control circuit caused by noises. ICU PWB HD access circuit trouble. Check & Remedy Turn OFF/ON the power to automatically initialize the data related to the contents where a check sum error occurred. Registered contents are deleted. Register the deleted contents again. Cancel the U2 trouble with SIM16. Replace the HD PWB. Replace the ICU PWB. AR-FX12 MACHINE OPERATION 7-5 [07]MACHINEOPERATION.fm 6 ページ 2004年10月26日 火曜日 午後3時45分 B. Communication report codes This code is indicated in the column of protocol communication report in a communication repot table and a communication management table when communication is terminated. Communication report XX (YY ZZ) <1>Communication report code XX (Top 2 digits): 00 ~ 99 <2>Communication report sub code 1: YY: Not used in this machine. (Always 00) <3>Communication report sub code 2: ZZ: Indicates details of the report. (1) Communication report code list 1 Means of communication: S = Send, R = Receive, P = Polling, B = Bulletin board Report code (Communication Display in the column of result result) 0 ~ 31 Refer to the following descriptions. Content of communication interruption Means of communication Depends on the point of communication interruption. For 16 or later, V.34 mode communication. Refer to "(2) Communication report code list 2" in 7-6. 33 BUSY The calling side cannot establish connection with the remote party. 34 CANCEL A communication interruption command is made during sending/receiving.The interruption key is pressed for interruption of input. <S/R/P/B> 35 NG35XXXX Power is failed during sending/receiving. <S/R/P/B> 36 (No record paper) 37 (Record paper jam) 38 MEM. FULL Memory over during reception.Print is not made during reception in acting reception inhibit. <R/P><R/P> 39 (Number of paper unmatched) 40 (Relay not received) 41 LENGTH OVER The send data length of one page exceeds the limit (2m) in sending. <S/B> 42 LENGTH OVER The receive data length of one page exceeds the limit. <R/P> 43 (Communication) (OK) Speaking before data transmission 44 ORIGINAL ERROR A document jam occurs in direct sending. <S> 45 (Picture quality error) <S/P> 46 NO RESPONSE The FAX signal from the remote party is not detected within T1 time. 47 TX DECODE ERROR A decode error occurs in the FAX board. <S/B> 48 OK Normal end of communication OK REPLY RECEIVE OK in internet FAX send with reception confirmation. Normal end of communication 49 NO RX POLL The called side does not have polling function in polling reception. The called side <P><P> has no data to send. 50 RX POLL FAIL In polling reception, DCN is received for DTC.In polling sending, there is no send <P><B> data. 51 PASS # NG In poling sending, the allow number is not matched. In polling sending, the system number is not matched. <B><B> 52 (No confidential function in remote party) In confidential sending, the remote party does not have confidential function. (Including other company's machines) <1>The NSF signal has not "Confidential function" bit. <2>The NSF is not a Sharp machine. <S> <S> 53 (Confidential not received) <1>In confidential sending, DCN is received for NSS. 54 (Confidential BOX NO NG) <1>In confidential reception, a confidential box number which is not registered is <R> specified. 55 (No relay function in remote party) In relay command sending, the remote machine has no relay function. (Including other company's machine) <1>The NSF signal has not "Confidential function" bit. <2>The NSF is not a Sharp machine. 56 NO REL RX <S><R><R> <1>In relay command sending, DCN is received for NSS. <2>In relay command reception, a remote station number which is not registered is specified. <3>In F code relay broadcasting, an F code relay command is received. 57 (Relay ID unmatched) <1>In relay command reception, the relay ID does not match. 58 REJECTED In reception, data are sent from a remote machine of receive inhibit number. AR-FX12 MACHINE OPERATION 7-6 <S> <R> [07]MACHINEOPERATION.fm 7 ページ 2004年10月26日 火曜日 午後3時45分 Report code (Communication Display in the column of result result) Content of communication interruption Means of communication 59 RX NO F-CODE POLL In F code polling (calling), the remote machine has no DIS bit 47 (polling function). In F code polling (calling), the called side has no send data. (DIS bit 9 is 0.) <P> 60 NO F-CODE POLL In F code polling (calling), DCN is received for SEP. In bulletin board, there is no send data for SEP. <P><B> 61 RX POLL # NG In bulletin board, the sub address (bulletin board number (SEP)) is not matched. <B> 62 F POLL PASS # NG In bulleting board, the pass code (PWD) is not matched. <B> 63 NO F FUNC In F code sending, the remote machine has no DIS bit 49 (sub address function). <S> Check that the remote machine conforms to F code. 64 NO F-CODE In F code sending : <1>DCN is received for SUB. --- Check the box number. <2>DCN is received for SID. --- Check the box number and pass code. In F code receiving : "F code relay broadcasting" or "F code confidential reception" is "Inhibited with soft SW." 67 F PASS # NG In F code receiving, the pass code (SID) is not matched. <R> 68 BOX NO NG In F code reception, a box number which is not registered is specified. (SUB is not matched.) <R> 69 MEMORY OVER Memory over in quick online sending <S> 70 (JOB MEMORY OVER) In PC-FAX reservation, the number of remote parties is exceeded. <S> 71 NG71XXXX* In PC-FAX reservation, data sent from PC includes some errors. <S> 72 NG72XXXX* In department management setting on the machine side: •In reservation from PC-FAX or PC-IFAX, a department number which is not <S> registered on the machine side is specified. •In reservation from PC-FAX or PC-IFAX, the department number is not specified. <S> 73 NG73XXXX* In reservation from PC-FAX or PC-IFAX, the use quantity limit is exceeded. 74 NG74XXXX* When reserving specified filing in document filing in PC-FAX or PC-IFAX; •The pass-code for the folder is set on the machine side and the pass-code from <S> PC-XXX does not match with it. •The pass-code for the folder is set on the machine side and no pass-code is <S> specified by PC-XXX. 75 NG75XXXX* Reservation cannot be made due to machine busy. (Reservation of PC-FAX cannot be accepted.) (This does not occur in Dragon.) <S> 76 NG76XXXX* Reserved with receive confirmation request in PC-IFAX, but the IFAX sender is not registered on the machine side. <S> 77 NG77XXXX* In reserving specified filing in PC-FAX or PC-IFAX, the machine has no filing function. 78 NG78XXXX* When making a reservation of filing designation by PC-FAX or PC-IFAX, the filing function on the machine is inhibited. 80 NG80XXXX* NIC connect failure (Network abnormality) •Check for disconnection of cables. •A network trouble (CE-xx) occurs. •The port is set to disable. •Authentication by the POP server is failed when POP before SMTP setting is valid. 81 NG REPORT In internet FAX send, reply of receive confirmation of the remote machine is not normal. (Including PC-IFAX). •Error of the disposition-modifier . •The disposition modifier is not in an error, and the disposition type is other than displayed, dispatched, or processed. 82 NO REPORT In internet FAX send, time-out occurs in waiting for receive confirmation from the remote machine. (Including PC-IFAX). •In a case where send confirmation wait time-out time is other than 0, when send confirmation reply from an internet FAX destination is not received. •Recalls of the set number of recalls are performed, but send confirmation reply from an internet AFX destination is not received. 83 NG LIMIT In E-mail/FTP, internet FAX send, the send data size exceeds the upper limit of send data. 84 REJECTED In e-mail receive, a sender is registered in receive reject address/domain. 85 NG85XXXX* In e-mail receive, an error occurs in communication with POP3 server. •Header acquisition error. •Time-out during mail receive AR-FX12 MACHINE OPERATION 7-7 <S><R> <S> <R> [07]MACHINEOPERATION.fm 8 ページ 2004年10月26日 火曜日 午後3時45分 Report code (Communication Display in the column of result result) Means of communication Content of communication interruption 86 RECEIVED In e-mail receive, an unsupported attached file is received. Only the TIFF-F type is supported for attached files. •The TIFF-F type of the attached file cannot be recognized. •There is no attached file. 87 NG87XXXX* In e-mail receive, an attached file cannot be stored in memory. •Memory over 88 NG88XXXX* In SMTP e-mail receive, an attached file cannot be stored in memory. •Cannot be stored in memory. •The number of items of acting receive data is the maximum, and an additional data cannot be stored. 89 NG89XXXX* In SMTP e-mail receive, an error occurs in communication with the mail server. •Time-out occurs during e-mail receive. 90 NG90XXXX* After reservation by re-operation of document filing, conversion for image send cannot be made. * For a job status result in "Display in the column of result," "NG XXXX" is displayed. " " is the code number. For a communication result, "Communication error " is displayed. •When the communication result is OK, the communication sub code 1 and the communication sub code 2 are "0000." •Errors in ( ) are not used in this machine. (2) Communication report code list 2 Report code Final receive signal (Send side) Final receive signal (Receive side) 0 Abnormal signal Abnormal signal 1 NSF, DIS (SID), (SUB), NSS, DCS 2 CFR (PWD), (SEP), NSC, DTC 3 FTT EOP 4 MCF EOM 5 PIP, PIN MPS 6 RTN, RTP PRI-Q 7 No signal, DCN DCN 8 PPR PPS-EOP 9 PPS-EOM 10 PPS-MPS, PPS-NULL 11 RNR RR 12 CTR CTC 13 ERR Remark EOR-Q 14 PPS-PRI-Q 15 16 Abnormal signal Abnormal signal V.34 MODE COMMUNICATION 17 NSF, DIS SID, SUB, NSS, DCS V.34 MODE COMMUNICATION 18 CFR PWD, SEP, NSC, DTC V.34 MODE COMMUNICATION 19 FTT PPS-EOP V.34 MODE COMMUNICATION 20 MCF PPS-EOM V.34 MODE COMMUNICATION 21 PIP, PIN PPS-MPS, PPS-NULL V.34 MODE COMMUNICATION 22 RTN, RTP PRI-Q V.34 MODE COMMUNICATION 23 No signal, DCN DCN V.34 MODE COMMUNICATION 24 PPR 25 RNR RR V.34 MODE COMMUNICATION 26 CTR CTC V.34 MODE COMMUNICATION 27 ERR EOR-Q V.34 MODE COMMUNICATION V.34 MODE COMMUNICATION 28 PPS-PRI-Q V.34 MODE COMMUNICATION 29 V.8Phase-1 V.8Phase-1 V.34 MODE COMMUNICATION 30 V.8Phase-2 V.8Phase-2 V.34 MODE COMMUNICATION 31 V.8Phase-3 V.8Phase-3 V.34 MODE COMMUNICATION •For report codes 16 ~ 31, V.34 MODE COMMUNICATION. AR-FX12 MACHINE OPERATION 7-8 [07]MACHINEOPERATION.fm 9 ページ 2004年10月26日 火曜日 午後3時45分 (3) Communication report sub code Report code 2 01 Content of communication interruption Send/Receive Send length over Send 02 EOL time up Receive 03 Carrier detection time up Receive 04 Not used - 05 Time up in phase C (8 min) Send 06 Memory image decode error Receive 07 Memory image decode error Send 08 Time up between frames in phase C (Report code is 0 or 16.) Send/Receive 09 Not used - 10 Not used - 11 Polarity reversion detection Receive 12 Invalid command reception Receive 13 Time up (1-minute timer/6-second time) Receive 14 PUT error Receive 15 In V.34 mode, time up is generated when shifting from Primary to Control. Receive 16 In V.34 mode, time up is generated when shifting from Control to Primary. Receive 17 Command receive time-up from MFP controller Receive 18 Not used - 19 Not used - 20 Polarity reversion detection Send 21 Invalid command reception Send 22 Fallback retry number over Send 23 Command retry number resend over Send 24 Time up (T5 timer) Send 25 Time up (T5 timer) in V.34 mode Send 26 In V.34 mode, time up is generated when shifting from Primary to Control. Send 27 In V.34 mode, time up is generated when shifting from Control to Primary. Send 28 Modem chip response NG *1 Send/Receive 29 Not used - 30 A communication error is generated between MFP controller and Modem controller. (Report code is 0 or 16.) 31 DC current not detected (busy) Send 32 Dial tone not detected (busy) Send 33 Busy tone detection (busy) Send 34 T0 time up (Remote machine not responding) Send 35 T1 time up (Remote machine not responding) Send 36 In dialing, polarity reversion detection (Remote machine not responding) Send 37 Calling is not made (busy)<Collision detected (including CNG detection)> Send 38 JBIG chip response NG Send/Receive 60 In resend of document filed data, an error occurs in decoding or coding. 61 In resend of document filed data, setting to inhibit resolution conversion is made. (The resolution after resend is set to be Enlarged.) 62 In resend of document filed data, rotation setting is made for data which cannot be rotated. 63 In resend of document filed data, data cannot be stored in HD after conversion of resolution for resend. 70 E-mail header acquisition error 71 Time out occurs during e-mail receive. 72 Receive reject occurs during e-mail receive. 73 Because of port disable, network communication is failed. Network send 74 Authentication by the POP server is failed when POP before SMTP setting is valid. Network send 80 There is no attached file in received e-mail. 81 The attached file of received e-mail is not of TIFF type which is supported. 82 The TIFF type of the attached file in received e-mail cannot be recognized. ID error 83 The TIFF type of the attached file in received e-mail cannot be recognized. Endian error 84 The TIFF type of the attached file in received e-mail cannot be recognized. Version error 85 The TIFF type of the attached file in received e-mail cannot be recognized. Tag data error 86 The TIFF type of the attached file in received e-mail cannot be recognized. Tag parameter error 87 The TIFF type of the attached file in received e-mail cannot be recognized. Header size error 88 The TIFF type of the attached file in received e-mail cannot be recognized. Data error AR-FX12 MACHINE OPERATION 7-9 [07]MACHINEOPERATION.fm Report code 2 10 ページ 2004年10月26日 火曜日 午後3時45分 Content of communication interruption 90 In e-mail receive, an attached file cannot be stored in memory. Memory overCannot be stored in memory. 91 In e-mail receive, an attached file cannot be stored in memory. The file size is too great to be stored in memory. 92 In SMTP e-mail receive, an attached file cannot be stored in memory. Cannot be stored in memory. *1: Does not occur in Tiger and Dragon. When the sub code is 08 or 30, if the communication report is OK, the report code is 00 or 16. AR-FX12 MACHINE OPERATION 7-10 Send/Receive / 26PIN / 36PIN CTS1,TXD1,RTS1 RXD1,CTS2,TXD2 RTS2,RXD2,FAX_RESRES_MFP-,MSW_OFF VLED,FAX_VPP,CNCT_FAXFAX_PWON-,PRON_FAX- MFP controller (FAX I/F PWB) Connect the ROM socket ROM Emulator I/F PWB PARTNER-ET II (ROM Emulator) AR-FX12 ELECTRICAL SECTION 8-1 ROM_VPP Inverter RESETPFrom RESET circuit From RESET RESET circuit CNCT_FAX- MFP-I/F connector (All Signal) H-UDI connector for emulator RESET RESET circuit From RESET circuit RESET1-,RESET (GA work memory) SDRAM +5VS(F) To NIGHT TIME FAX circuit C PU To FAX G/A,SERIAL EEPROM To FAX G/A To H-UDI CONNECTOR for EMULATIONS MWAIT CA[1:23] CD[0:15] FAX G/A FAX_PWON PRON_FAX From NIGHT TIME FAX circuit RS-232 Transceiver RS-232 Transceiver SCIF2 TPW1,2: Power ON mode Select pin From NIGHT TIME FAX circuit F-NETD- To CPU RESET RESET1RESET- Frequency diffusion RES_MFP-,FAX_PWON TD62503 PRON_FAX- CTS1,TXD1,RTS1,RXD1 CTS2,TXD2,RTS2,RXD2 LEDX1 LEDX1 Serial EEPROM Crystal Oscilator (12.3678MHz) FAX_RESMANRES- RESET- VLED MSW_OFF RD/WR-,WATT,BS,WEO,WE1CS0-,CS2,CS4-,CS5-,IRQ3-CKIO Data BUS NIGHT TIME FAX F-NETD- MWAITFNETONFAXVPP PICRESPICVPP PICCK PICDI PICDO BZ SPSELA,SPELB,SPMUTE VOLA,VOLB,VOLC DP,S,CML,MR,RCVMUTE-,MICMUTE-,CION EC,RHS,VRSEL1-,VRSEL2-,VRSEL3- FLASH MEMORY (PROGRAMU ROM) (CPU WORK MOMORY) CRYSTAL OSCILLATOR 14.7456MHz IORES2- FAX_VPP CS0-,RD-,WE0- CD[0:31] CA[2:22] CD[0:15] CA[1:11] CS3-,RD/WE,CKIO,CKE RAS3L-,CASL-, WE0-,WE1-,WE2-,WE3- 3-PIN REGULATOR (NIGHT TIME FAX POWER 5V) To TD62503F CD[0:31] +12VS(F) FNETD- CID- CI- PRON_FAX To CPU POWER CONNECTOR 5VS generation 1.8V generation MODEM (DSP) CRYSTAL OSCILLATOR (24.576MHz) VOICE PATH SWITCH CIRCUIT TEL/LIU PWB UN CONNECTOR 2PIN 32PIN CONNECTOR SP I pattern MONITOR CIRCUIT SIGRX,SIGTX HS1-,HS2-,RHS,CI-,CIDEXHS-,CION,MR,SCML DP,RCVMUTE-,MICMUTEVRSEL1-,VRSEL2-,VRSEL3EC,CID-,FNETD-,TELID +5V(F),+12V(F),+12VS(F) GND(DG),GND(AG) 4PIN FAX POWER UNIT TEL/LIU CONNECTOR I pattern MONITOR CONNECTOR 3.3V generation MODEM (AFE) (MODEM POWER 3.3V) 3-PIN REGULATOR +5V(F) MODEM CIRCUIT VOLTAGE REGULATOR (CPU POWER1.8V) +5V(F) +5V(F),+3.3 (F),+12V(F),GND(DG),GND(AG) /6PIN CA[2:15] SDRAM NIGHT TIME FAX CIRCUIT DCPR MSW_OFF2 +12VS(F),GND(AGS),DCPR /3PIN POWER CONNECTOR ROM_VPP From INVERTER IRQ0- To FAX G/A From FAX G/A From FAX G/A From MFPI/F CONNECTOR From FAX G/A From FAX G/A From FAX G/A From CPU To CPU RxD0,TxD0 DEBUG MONITOR CONNECTOR /4PIN +3.3(V),RxD0,TxD0,GND(DG) CS5-,RD IOWR0-,IOWR1- PC for DEBUG IORES- (DEBUG MONITOR TERMINAL) SIGTX For DEBUGGING(No memory) SIGTX Address BUS [08]ELECTRICALSECTION.fm 1 ページ 2004年10月26日 火曜日 午後3時46分 [8] ELECTRICAL SECTION 1. Block Diagram to MFP Control Unit 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 FXA7 FXA8 FXA9 FXA10 FXA11 FXA12 FXA13 FXA14 FXA15 FXA16 FXA17 FXA18 FXA19 FXA20 RES_MFP(NC) DG DG (NC) FMCS15 FMCS16 FXA22 FOE2 FWE2 (NC) DTXD0 DRTS0 DRXD0 DCTS0 RES_FAXCTXD1 CRTS1 CRXD1 CCTS1 CNCT_FAX (NC) (NC) FRDY MSW_MONRD/BYFRESET FB_IN FAX_PWONDG PRON_FAXDG +5V +5V +5V FX_VCCW +3.3V +3.3V +3.3V +3.3V DG DG DG DG FXD0 FXD1 FXD2 FXD3 FXD4 FXD5 FXD6 FXD7 FXD8 FXD9 FXD10 FXD11 FXD12 FXD13 FXD14 FXD15 FXD16 FXD17 FXD18 FXD19 FXD20 FXD21 FXD22 FXD23 FXD24 FXD25 FXD26 FXD27 FXD28 FXD29 FXD30 FXD31 DG DG DG DG FXA2 FXA3 FXA4 FXA21 FXA5 FXA6 DG TXD0 RXD0 RTS0 CTS0 TXD1 RXD1 RTS1 CTS1 RES_FAXPRON_FAXFRDY FFVPPW DG DG DG DG DG DG DG DG DG RES_MFPMSW_MONCNCT_FAXFAX_PWON1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 CN-1 DX10G1M-26SE FAX I/F PWB CN3 100R2.8-JXKS-GB SPEAKER+ un DG AG AG SIGRX TELRX SIGTX +12V(F) +12V(F) HS1HS2RHS EXHSCICION MR S CML DP RCVMUTEMICMUTEVRSEL1VRSEL2VRSEL3EC CIDFNETD+5V(F) +12VS(F) AGS DG AR-FX12 ELECTRICAL SECTION 8-2 RD RD 1 SPBL BL 2 SP+ CN5 B2B-PH-K-S 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 1 2 3 4 5 6 OR GY BL GY OR BR OR +12VS(F) 1 GY 2 AGS 3 BR DCPR CN7 B3B-PH-K-S +12V(F) AG +5V(F) DG +3.3V(F) (NC) CN8 B6P-VH MDMC PWB 1 DG 2 FAX_RXD1 3 FAX_TXD1 4 FAX_CTS1 5 FAX_RTS1 6 FAX_RXD0 7 FAX_TXD0 8 FAX_CTS0 9 FAX_RTS0 10 FAX_RES11 PRON_FAX12 VLED 13 FAX_VPP 14 DG 15 DG 16 DG 17 DG 18 DG 19 DG 20 DG 21 DG 22 DG 23 RES_MFP24 MSW_OFF 25 CNCT_FAX26 FAX_PWON- CN1 CN6 DX10G1M-26SE 30FE-BT-VK-N DG AG AG SIGRX TELRX SIGTX 12V 12V HS1HS2RHS EXHSCICION MR S CML DPRCVMUTEMICMUTEVRSEL1VRSEL2VRSEL3EC CIDFNETD5V 12VS AGS DG BR GY 1 CIP PL 2 AG 3 CIOUT- BT1 LT1 1 TEL1 2 TEL2 LT2 BT2 1 2 3 4 5 6 T1 L1 L2 T2 +12V GND(AG) +5V GND(DG) +3.3V FW 1 GY 2 +12VL BR 3 GND-S DCPR 1 2 3 4 5 6 CN1 B6P-VH 1 2 3 4 5 6 to LINE FG GR/YL(GR/YL) N1F WH(BL) WH(BL) N L1F BK(BR) L BK(BR) FG GR/YL(GR/YL) BK(BR) GR/YL(GR/YL) WH(BL) BK(BR) GR/YL(GR/YL) WH(BL) 100V(200V) to EXTENSION PHONE FAX POWER un TX+ RX+ RXTXRHSDG CN2 OR B3B-PH-K-S OR GY BL GY OR BR BR S04B-XASK-1 1 CIP 2 GY 3 (NC) BR 4 GND(AG) CIOUT- CN3 100V Only 1 2 CN1 MD-S610-90 JPN Only 1 2 L1 3 L2 4 MJ1 (EU/AUS) (JPN/UC) MJ-64J-RD315 MJ-62J-RD315 T1 T2 MJ2 (EU/AUS) (JPN/UC) MJ-64J-RD315 MJ-62J-RD315 TEL/LIU PWB CIP 1 GY AG 2 BR CIOUT- 3 DG AG AG SIGRX (NC) SIGTX 12V 12V HS1HS2LIUID (NC) CI(NC) DPMUTE S CML DP(NC) (NC) VRSEL1VRSEL2VRSEL3(NC) CID(NC) 5V 12VS (NC) DG SMR-03V-N SMP-03V-NCBR BR S03B-XASK-1 1 CIP GY PL 2 AG 3 CIOUT- CN3 JPN Only 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 CN2 CN1 (JPN/UC) (EU/AUS) 30FE-BT-VK-N 1 2 3 4 5 6 Lin FG(Earth) Nin Lout FG(Earth) Nout VLP-06V-1 to MAIN un [08]ELECTRICALSECTION.fm 2 ページ 2004年10月26日 火曜日 午後3時46分 2.Actual Wiring Diagram AR-FX12 ELECTRICAL SECTION 8-3 A B C D 8 8 (3-7D,4-7C) (3-5D,4-3C) 3,4 3,4 7 FXA[2:22] FXD[0:31] 7 (5-7C) 5 4 3 TP71 FMCS15 FMCS16 6 5 FX_VCCW (5-7C) (5-6C) FAX_PWONPRON_FAX- 5 5 (5-7C) (3-7C,4-7B) (3-7B,4-7B) 1 1 1 1 RES_MFP- 1 TP70 3,4 FOE2 3,4 FWE2 TP72 2 DTXD0 (2-7C) 2 DRTS0 (2-7C) 2 DRXD0 (2-7C) 2 DCTS0 (2-7C) RES_FAX(5-7C) 5 2 CTXD1 (2-7B) 2 CRTS1 (2-7B) 2 CRXD1 (2-7B) 2 CCTS1 (2-7B) CNCT_FAX(5-7C) 5 TP73 TP74 5 FRDY (5-5C) MSW_MON(5-7C) 5 3,4 RD/BY(3-5C,4-7B) FRESET (3-5C,4-7B) 3,4 (4-7B) FXA22 (3-7C) FXA7 FXA8 FXA9 FXA10 FXA11 FXA12 FXA13 FXA14 FXA15 FXA16 FXA17 FXA18 FXA19 FXA20 6 TP5 TP46 TP47 TP6 TP27 TP52 TP57 TP53 TP58 TP64 TP59 TP65 TP60 TP63 TP66 TP67 TP68 TP69 TP49 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 5 FMCS18 FMCS19 FMCS14 R31 R30 R29 R28 R27 WPOUT FR/KM- R45 R44 R43 R42 R41 R40 R39 R38 R37 R36 R35 R34 R33 R32 5 100J 100J 100J 100J 100J 100J 100J 100J 100J 100J 100J 100J 100J 100J 100J 100J 100J 100J 100J FB_IN +5V 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 4 100R2.8-JXKS-GB 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 CN3 4 0.1uF C25 +3.3V + 3 10uF/16V C24 +3.3V R26 R25 R24 R23 R22 R21 3 100J 100J 100J 100J 100J 100J 1 1 1 1 1 1 TP44 TP1 TP2 TP51 TP3 TP4 1 1 1 TP21 TP55 TP75 FXA2 FXA3 FXA4 FXA21 FXA5 FXA6 2 FXD0 FXD1 FXD2 FXD3 FXD4 FXD5 FXD6 FXD7 FXD8 FXD9 FXD10 FXD11 FXD12 FXD13 FXD14 FXD15 FXD16 FXD17 FXD18 FXD19 FXD20 FXD21 FXD22 FXD23 FXD24 FXD25 FXD26 FXD27 FXD28 FXD29 FXD30 FXD31 2 1 1 A B C D [08]ELECTRICALSECTION.fm 3 ページ 2004年10月26日 火曜日 午後3時46分 3.Circuit Diagram FAX I/F PWB (1/5) AR-FX12 ELECTRICAL SECTION 8-4 A B C D 1 1 (1-6C) (1-6C) 1 1 1 (1-6C) (1-6C) (1-6C) 1 1 (1-6C) (1-6C) 1 (1-6C) 8 8 CCTS1 CRXD1 CTXD1 CRTS1 DCTS0 DRXD0 DTXD0 DRTS0 +3.3V +3.3V 1 1 1 TP10 TP15 TP9 0 R12 4.7kJ R20 0 R18 TP43 TP50 1 TP31 0 1 1 TP32 TP36 1 1 6 18 14 1 10 1 TP38 15 12 13 6 5 4 1 C13 0.1uF-D C12 0.1uF-D 2 18 14 1 10 1 TP17 15 1 12 13 6 5 4 2 TP29 1 6 TP28 C2 0.1uF-D C1 0.1uF-D TP33 R19 4.7kJ R9 0 R13 7 1 TP11 7 IC3 IC4 GND V- V+ VCC MAX3225ECAP FORCEOFF INVALID R2IN R1IN T2OUT T1OUT V- V+ VCC FORCEOFF INVALID R2IN R1IN T2OUT T1OUT MAX3225ECAP FORCEON READY R2OUT R1OUT T2IN T1IN C2- C2+ C1- C1+ GND FORCEON READY R2OUT R1OUT T2IN T1IN C2- C2+ C1- C1+ 1 1 9 TP54 1 16 1 1 8 5 20 11 1 TP62 TP34 TP61 TP35 TP56 0.1uF C17 +3.3V 17 7 3 19 20 TP26 1 9 1 TP13 1 16 TP20 TP25 1 11 TP14 1 8 1 C9 0.1uF TP22 +3.3V 17 7 3 19 5 4 4 1 1 0.1uF-D C15 TP30 C8 0.1uF-D TP8 1 1 3 0.1uF-D C14 TP37 C7 0.1uF-D TP16 3 R17 R14 R16 R15 R7 R3 R6 R4 0 0 0 0 0 0 0 0 2 2 RTS1 TXD1 RXD1 CTS1 RTS0 TXD0 RXD0 CTS0 5 5 5 5 5 5 5 5 (5-5C) (5-5C) (5-5C) (5-5C) (5-5C) (5-5C) (5-5C) (5-5C) 1 1 A B C D [08]ELECTRICALSECTION.fm 4 ページ 2004年10月26日 火曜日 午後3時46分 FAX I/F PWB (2/5) +3.3V 8 (1-7D,3-7D) FOE2 FWE2 1,4 (1-5C,4-7B) FMCS16 1,4 1 FXA[2:22] (1-5C,4-7B) (1-5C) 1,4 7 7 R11 4.7kJ 6 6 1 43 72 1 1 TP40 TP42 TP48 11 1 TP39 AR-FX12 ELECTRICAL SECTION 8-5 1 20 30 39 44 46 47 42 40 12 13 14 15 16 17 18 28 31 32 29 33 34 36 65 66 67 68 69 70 71 41 1 TP45 FXA2 FXA3 FXA4 FXA5 FXA6 FXA7 FXA8 FXA9 FXA10 FXA11 FXA12 FXA13 FXA14 FXA15 FXA16 FXA17 FXA18 FXA19 FXA20 FXA21 FXA22 5 177827-1 GND GND GND GND OE WP WE 2CE 1CE N.C N.C N.C D15/A_1 A0 A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 A11 A12 A13 A14 A15 A16 A17 A18 A19 A20 CN2 SDIMM1-32bit 5 VCC VCC VCCW RP RY/BY BYTE D0 D1 D2 D3 D4 D5 D6 D7 D8 D9 D10 D11 D12 D13 D14 D15/A_1 D16 D17 D18 D19 D20 D21 D22 D23 D24 D25 D26 D27 D28 D29 D30 D31 61 10 55 19 45 48 2 3 4 5 6 7 8 9 21 22 23 24 25 26 27 35 37 38 49 50 51 52 53 54 56 57 58 60 59 62 63 64 4 1 FXD0 FXD1 FXD2 FXD3 FXD4 FXD5 FXD6 FXD7 FXD8 FXD9 FXD10 FXD11 FXD12 FXD13 FXD14 FXD15 FXD16 FXD17 FXD18 FXD19 FXD20 FXD21 FXD22 FXD23 FXD24 FXD25 FXD26 FXD27 FXD28 FXD29 FXD30 FXD31 4 TP41 R10 4.7kJ 3 3 FRESET RD/BY- 1,4 1,4 FXD[0:31] (1-7D,3-5D) 2 (1-5B,4-7B) (1-5B,4-7B) 1,4 2 +3.3V +3.3V C10 0.1uF C11 0.1uF 1 +3.3V 1 FAX I/F PWB (3/5) A B C D 8 A B C D [08]ELECTRICALSECTION.fm 5 ページ 2004年10月26日 火曜日 午後3時46分 AR-FX12 ELECTRICAL SECTION 8-6 A B C D FXA[2:22] 8 RD/BYFRESET 1 FMCS15 1,3 FOE2 1,3 FWE2 (1-6B,3-5C) 1,3 (1-6B,3-5C) 1,3 (1-6C) (1-6C,3-7C) (1-6C,3-7B) (1-7D,3-7D)1,3 8 4.7kJ 4.7kJ TP19 R2 +3.3V R8 +3.3V 7 7 1 14 47 1 1 TP23 26 28 11 25 24 23 22 21 20 19 18 8 7 6 5 4 3 2 1 48 17 16 9 10 TP12 FXA2 FXA3 FXA4 FXA5 FXA6 FXA7 FXA8 FXA9 FXA10 FXA11 FXA12 FXA13 FXA14 FXA15 FXA16 FXA17 FXA18 FXA19 FXA20 FXA21 GND GND Vcc Vccw RP RY/BY DQ0 DQ1 DQ2 DQ3 DQ4 DQ5 DQ6 DQ7 DQ8 DQ9 DQ10 DQ11 DQ12 DQ13 DQ14 DQ15/A_1 6 LH28F800BJE-PTTL90 BYTE WP CE OE WE A0 A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 A11 A12 A13 A14 A15 A16 A17 A18 N.C N.C IC2 6 27 46 37 13 12 15 29 31 33 35 38 40 42 44 30 32 34 36 39 41 43 45 FXD0 FXD1 FXD2 FXD3 FXD4 FXD5 FXD6 FXD7 FXD8 FXD9 FXD10 FXD11 FXD12 FXD13 FXD14 FXD15 5 5 0.1uF C4 +3.3V 0.1uF C6 +3.3V 4.7kJ R5 +3.3V 4 TP18 4.7kJ R1 +3.3V 4 TP24 TP7 1 FXA2 FXA3 FXA4 FXA5 FXA6 FXA7 FXA8 FXA9 FXA10 FXA11 FXA12 FXA13 FXA14 FXA15 FXA16 FXA17 FXA18 FXA19 FXA20 FXA21 1 1 3 47 14 26 28 11 25 24 23 22 21 20 19 18 8 7 6 5 4 3 2 1 48 17 16 9 10 3 GND GND Vcc Vccw RP RY/BY DQ0 DQ1 DQ2 DQ3 DQ4 DQ5 DQ6 DQ7 DQ8 DQ9 DQ10 DQ11 DQ12 DQ13 DQ14 DQ15/A_1 LH28F800BJE-PTTL90 BYTE WP CE OE WE A0 A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 A11 A12 A13 A14 A15 A16 A17 A18 N.C N.C IC1 27 46 37 13 12 15 29 31 33 35 38 40 42 44 30 32 34 36 39 41 43 45 2 FXD16 FXD17 FXD18 FXD19 FXD20 FXD21 FXD22 FXD23 FXD24 FXD25 FXD26 FXD27 FXD28 FXD29 FXD30 FXD31 2 0.1uF C5 +3.3V 1 0.1uF C3 +3.3V FXD[0:31] 1,3 (1-7D,3-5C) 1 A B C D [08]ELECTRICALSECTION.fm 6 ページ 2004年10月26日 火曜日 午後3時46分 FAX I/F PWB (4/5) 1 1 (1-6B) 1 1 (1-6C) (1-6B) (1-6C) (1-6B) (1-6C) 1 8 1 RES_FAX- AR-FX12 ELECTRICAL SECTION 8-7 FAX_PWON- CNCT_FAX- MSW_MON- RES_MFP- PRON_FAX- 1005 1005 7 N.M C18 N.M C19 7 1005 1005 N.M C22 N.M C16 1005 6 N.M C20 (1-6B) 6 1005 1 N.M C23 FX_VCCW 5 TP76 5 1 1 ICP-S1.2 F1 4 2 4 FFVPPW (1-6B) 1 2 (5-5C) 2 (5-5C) 2 2 (5-5C) (5-5C) 2 (5-5C) 2 2 (5-5C) (5-5C) 2 (5-5C) 3 3 FRDY CTS1 RTS1 RXD1 TXD1 CTS0 RTS0 RXD0 TXD0 1005 N.M C21 2 2 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 CN1 1 DX10G1M-26SE 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 1 FAX I/F PWB (5/5) A B C D 8 A B C D [08]ELECTRICALSECTION.fm 7 ページ 2004年10月26日 火曜日 午後3時46分 A B C D 2 8 R123 2.7kJ SR0 DG D5 RB751V40 RB751V40 D4 C15 C38 C17 C14 C42 C75 DG DG DG DG DG 7 DG EXTAL SCL SDA PTC2 PINT3 PTC4 NMI IRQ3- IRQMDM- ( 8 ) CRTS2 ( 8 ) CCTS2 ( 8 ) CRXD2 ( 8 ) CTXD2 R26 22J TP258 XTAL EXTAL +3.3V(F) +3.3V(F) TP165 TP149 TP148 TP147 TP32 TP44 TP7 TP17 TP49 TP74 TP46 TP47 TP45 TP91 TP225 TP275 TP234 TP224 TP226 R47 TP206 TP205 33J TP11 TP33 TP72 TP35 TP34 TP233 4.7kJ TP207 TP50 TP48 MODE3 MODE4 DG R122 R6 R5 TP103 TP104 TP128 DG 47J 47J 4.7kJ TP6 4.7kJ TP3 TP101 MODE0 TP8 MODE1 TP249 TP127 R68 TP126 R92 TP93 TP129 TP92 TP105 TP73 C43 C31 C13 C30 C37 C54 C62 C73 C74 C76 6 DG DG DG DG DG DG DG DG DG DG DG 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF C70 +3.3V(F) +3.3V(F) +3.3V(F) +3.3V(F) +3.3V(F) +3.3V(F) +3.3V(F) +3.3V(F) +3.3V(F) +3.3V(F) +3.3V(F) ( 2,3,5 ) CKIO ( 7,8 ) RESET- (6) PICDO(6) PICDI( 8 ) CPU_TCK ( 8 ) CPU_TDI ( 8 ) CPU_TMS (8) TRST- (2) (2) (7) (8) (7) (8) (5) (3) 4.7KJ 0 0 C63 0.1uF DG R141 100J 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF C16 N.M +3.3V(F) TP12 DG 0.1uF C1 N.M N.M TABLE.4 R1 R8 R2 N.M SSON MRA TP9 SR0 TP5 8 7 6 5 SSON TP4 P2027A VDD CLKIN XOUT SR0 MRA ModOUT VSS SSON +3.3V(F) +3.3V(F) 1 2 3 4 IC1 +3.3V(F) +1.8V(F) +1.8V(F) +1.8V(F) +1.8V(F) +1.8V(F) +1.8V(F) +1.8V(F) DG DG DG 0.1uF C77 +1.8V(F) DG MRA SR0 0 0 0 1 1 0 1 1 TABLE.4 Reserve +/-0.3% +/-0.2% +/-0.6% DG MRA SSON 0 1 DG 10pF(CH) TELID ON OFF (4) AT-51 (12.3678MHz) 1 X1 10pF(CH) R27 6 208 198 148 147 173 153 152 132 79 27 181 161 109 95 83 69 57 45 33 19 6 3 21 35 47 59 71 85 97 111 163 183 29 81 134 154 175 145 150 205 162 155 156 4 5 146 149 193 124 122 121 144 1 2 195 196 197 194 157 158 8 9 10 11 12 7 143 142 141 140 188 187 186 185 180 179 178 177 139 138 137 136 160 207 206 204 203 202 201 200 199 159 171 164 165 172 166 167 174 168 169 170 176 IC17 5 1 2 3 4 N.M B4B-PH-K-S 1 2 3 4 CN3 5 AVss AVss Vss-PLL2 Vss-PLL1 Vss Vss Vss Vss Vss Vss VssQ VssQ VssQ VssQ VssQ VssQ VssQ VssQ VssQ VssQ Vss(RTC) Vcc(RTC) VccQ VccQ VccQ VccQ VccQ VccQ VccQ VccQ VccQ VccQ Vcc Vcc Vcc Vcc Vcc Vcc-PLL1 Vcc-PLL2 AVcc(3.3V) CKIO XTAL EXTAL XTAL2 EXTAL2 CAP1 CAP2 A0 A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 A11 A12 A13 A14 A15 A16 A17 A18 A19 A20 A21 A22 A23 A24 A25 D31/PTB(7) D30/PTB(6) D29/PTB(5) D28/PTB(4) D27/PTB(3) D26/PTB(2) D25/PTB(1) D24/PTB(0) D23/PTA(7) D22/PTA(6) D21/PTA(5) D20/PTA(4) D19/PTA(3) D18/PTA(2) D17/PTA(1) D16/PTA(0) D15 D14 D13 D12 D11 D10 D9 D8 D7 D6 D5 D4 D3 D2 D1 D0 4 4 AUDSYNC/PTE(7) CE2B/PTE(5) CE2A/PTE(4) TDO/PTE(0) IOIS16/PTG(7) AUDCK/PTH(6) ADTRG/PTH(5) WAKEUP/PTD(3) RESETOUT/PTD(2) AUDATA(0)/PTG(0) AUDATA(1)/PTG(1) AUDATA(2)/PTG(2) AUDATA(3)/PTG(3) PTG(4) ASEBRKAK/PTG(5) ASEMD0/PTG(6) DREQ0/PTD(4) DACK0/PTD(5) DRAK0/PTD(1) DREQ1/PTD(6) DACK1/PTD(7) DRAK1/PTD(0) CS0/MCS(0) CS2/PTK(0) CS3/PTK(1) CS4/PTK(2) CS5/CE1A/PTK(3) CS6/CE1B BS/PTK(4) RAS3L/PTJ(0) RAS2L/PTJ(1) RAS3U/PTE(2) RAS2U/PTE(1) CAS2L/PTE(6) CAS2H/PTE(3) CASLL/CASL/PTJ(2) CASLH/CASU/PTJ(3) CASHL/PTJ(4) CASHH/PTJ(5) WE0/DQMLL WE1/DQMLU/WE WE2/DQMUL/ICIORD/PTK(6) WE3/DQMUL/ICIOWR/PTK(7) RD/WR RD CKE/PTK(5) WAIT HD6417709AF100 RESETP RESETM BREQ BACK MD0 MD1 MD2 MD3 MD4 MD5 CA STATUS0/PTJ(6) STATUS1/PTJ(7) IRQ0/IRL0/PTH(0) IRQ1/IRL1/PTH(1) IRQ2/IRL2/PTH(2) IRQ3/IRL3/PTH(3) IRQ4/PTH(4) NMI IRLS(0)/PTF(0)/PINT(8) IRLS(1)/PTF(1)/PINT(9) IRLS(2)/PTF(2)/PINT(10) IRLS(3)/PTF(3)/PINT(11) MCS(0)/PTC(0)/PINT(0) MCS(1)/PTC(1)/PINT(1) MCS(2)/PTC(2)/PINT(2) MCS(3)/PTC(3)/PINT(3) MCS(4)/PTC4)/PINT(4) MCS(5)/PTC(5)/PINT(5) MCS(6)/PTC(6)/PINT(6) MCS(7)/PTC(7)/PINT(7) TCK/PTF(4)/PINT(12) TDI/PTF(5)/PINT(13) TMS/PTF(6)/PINT(14) TRST/PTF(7)/PINT(15) IRQOUT AN(7)/DA(0)/PTL(7) AN(6)/DA(1)/PTL(6) AN(5)/PTL(5) AN(4)/PTL(4) AN(3)/PTL(3) AN(2)/PTL(2) AN(1)/PTL(1) AN(0)/PTL(0) TCLK/PTH(7) RxD0/SCPT(0) TxD0/SCPT(0) SCK0/SCPT(1) RxD1/SCPT(2) TxD1/SCPT(2) SCK1/SCPT(3) RxD2/SCPT(4) TxD2/SCPT(4) SCK2/SCPT(5) RTS2/SCPT(6) CTS2/IRQ5/SCPT(7) DG N.M +3.3V(F) 94 104 103 120 126 151 125 182 184 135 133 131 130 129 128 127 191 114 189 192 115 190 96 98 99 100 101 102 87 106 107 118 119 116 117 108 110 112 113 89 90 91 92 93 88 105 123 53 54 55 56 58 60 61 62 63 64 65 66 67 68 70 72 73 74 75 76 77 78 80 82 84 86 13 14 15 16 17 18 20 22 23 24 25 26 28 30 31 32 34 36 37 38 39 40 41 42 43 44 46 48 49 50 51 52 TP43 TP70 TP150 TP177 TP71 TP10 TP14 TP204 TP90 TP167 TP203 TP102 TP166 TP31 TP100 TP123 TP125 TP121 TP30 TP41 TP42 TP120 TP257 TP29 TP86 TP87 TP88 TP89 TP69 TP40 TP122 TP28 TP2 TP124 TP246 TP272 TP263 TP264 TP245 TP244 TP242 TP243 TP189 TP190 TP188 TP212 TP176 TP160 TP174 TP175 TP142 TP162 TP161 TP163 TP145 TP146 TP144 TP143 TP141 TP164 TP202 TP222 TP223 TP199 TP200 TP221 TP201 TP197 TP220 TP198 TP194 TP219 TP195 TP196 TP218 TP192 TP232 TP217 TP193 TP191 TP216 TP215 TP248 TP214 TP231 TP213 TP247 TP230 TP229 TP268 TP267 TP266 3 CA1 CA2 CA3 CA4 CA5 CA6 CA7 CA8 CA9 CA10 CA11 CA12 CA13 CA14 CA15 CA16 CA17 CA18 CA19 CA20 CA21 CA22 CA23 CD31 CD30 CD29 CD28 CD27 CD26 CD25 CD24 CD23 CD22 CD21 CD20 CD19 CD18 CD17 CD16 CD15 CD14 CD13 CD12 CD11 CD10 CD9 CD8 CD7 CD6 CD5 CD4 CD3 CD2 CD1 CD0 PTD3 PTD2 PTE5 PTE4 TP16 TP173 TP158 TP157 TP172 TP241 TP444 TP15 47J 47J 47J 47J 47J 47J 47J TP340 TP493 TP187 TP383 TP367 TP382 TP159 TP27 TP265 TP468 TP450 TP470 TP603 TP451 TP352 TP585 TP387 TP374 TP388 TP375 TP386 TP336 TP372 TP373 TP483 TP484 TP485 TP500 TP502 TP501 TP503 TP351 TP455 TP474 TP456 TP457 TP442 TP454 TP441 TP423 TP459 TP389 TP390 TP461 TP462 TP391 TP392 TP463 TP289 TP288 TP301 TP300 TP274 TP284 TP273 TP282 TP283 TP280 TP281 TP279 TP318 TP317 TP316 TP327 47J 47J 47J 47J 47J 47J 47J 47J 47J BR1 47J(BR) BR2 47J(BR) BR3 47J(BR) BR4 47J(BR) BR5 47J(BR) 47J(BR) BR6 BR7 47J(BR) BR8 47J(BR) BR9 47J(BR) BR10 47J(BR) BR11 47J(BR) BR12 47J(BR) BR13 47J(BR) BR14 47J(BR) R97 R96 R95 R94 R93 R98 R22 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 5 6 7 8 5 6 7 8 5 6 7 8 5 6 7 8 5 6 7 8 5 6 7 8 5 6 7 8 5 6 7 8 R24 R72 R74 R75 R76 R77 R73 R99 R23 8 7 6 5 8 7 6 5 8 7 6 5 8 7 6 5 8 7 6 5 8 7 6 5 4 3 2 1 4 3 2 1 4 3 2 1 4 3 2 1 4 3 2 1 4 3 2 1 4 3 2 1 4 3 2 1 3 CD[0:31] CA[1:23] ASEBRKRK- ( 8 ) ASEMD0(8) (8) (8) (8) (8) (8) (8) AUDCK AUDATA0 AUDATA1 AUDATA2 AUDATA3 (8) CPU_TDO ( 2,5 ) ( 2,5 ) (2) (2) ( 2,5 ) ( 2,3 ) (2) (5) (2) (6) (7) (2) ( 2,5 ) (5) (2) (5) ( 3,5 ) (5) (5) (2) AUDSYNC- WE0WE1WE2WE3RD/WRRDCKE WAIT- ROMRY/BYMSW_OFF2 ROM_VPP CASL- CS0CS2CS3CS4CS5CS6BSRAS3L- 2 DG N.M PTE5 PTE4 PTD2 MODEM4 MODEM6 TABLE.2 MODE0 1 0 +3.3V(F) MODE1 MODE2 TABLE.3 E4(AR-FX5/FX6) E3(AR-FX8) E2(AR-C170FP/AR-FX10) E1(AR-FX12) Reserve Reserve Reserve Reserve TABLE.1 N.M MODE0 MODE1 MODE3 MODE4 +3.3V(F) CD[0:31] ( 2,3,5 ) CA[1:23] ( 2,3,5 ) 2 4.7kJ R7 R13 XTAL R175 N.M 0 0 R161 7 N.M 4.7kJ 4.7kJ R121 N.M 56J N.M 0 C80 10uF/16V 4.7kJ R120 R28 4.7kJ R124 PTD3 1 0 PTD3 R142(PTD2) N.M(1) N.M(1) N.M(1) N.M(1) 0 i0 j 0 i0 j 0 i0 j 0 i0 j R142 C7 470pF(B) C5 4.7kJ R20 R21 C2 470pF(B) C6 4.7kJ R11 1 DG N.M +3.3V(F) R12(PTE5) N.M(1) 0 i0 j N.M(1) 0 i0 j N.M(1) 0 i0 j N.M(1) 0 i0 j TABLE.1 R21(PTE4) N.M(1) N.M(1) 0 i0 j 0 i0 j N.M(1) N.M(1) 0 i0 j 0 i0 j DG 1 MODE1 0 1 N.M 0 N.M 0 N.M 0 R12 N.M N.M 4.7kJ R125 AR-FX12 ELECTRICAL SECTION 8-8 0 MDMC PWB (1/8) R143 8 A B C D [08]ELECTRICALSECTION.fm 8 ページ 2004年10月26日 火曜日 午後3時46分 A B C RD- WE0- ( 1,5 ) 8 ( 6,7,8 ) FAX_VPP CS0- ( 1,5 ) ( 1,3 ) (5) IORES2( 1 ) ROMRY/BY- +3.3V(F) 4.7kJ D ( 1,3,5 ) CD[0:31] 4.7kJ R205 ( 1,3,5 ) CA[1:23] 4.7kJ R25 R216 CA[1:23] CD[0:31] C129 0.1uF DG 7 C128 10uF/16V TP399 TP393 TP431 CA2 CA3 CA4 CA5 CA6 CA7 CA8 CA9 CA10 CA11 CA12 CA13 CA14 CA15 CA16 CA17 CA18 CA19 CA20 CA21 CA22 CD0 CD1 CD2 CD3 CD4 CD5 CD6 CD7 CD8 CD9 CD10 CD11 CD12 CD13 CD14 CD15 CD16 CD17 CD18 CD19 CD20 CD21 CD22 CD23 CD24 CD25 CD26 CD27 CD28 CD29 CD30 CD31 C90 0.1uF DG +3.3V(F) 8 7 6 5 8 7 6 5 8 7 6 5 8 7 6 5 8 7 6 5 8 7 6 5 8 7 6 5 8 7 6 5 C89 10uF/16V R200 BR38 47J(BR) BR39 47J(BR) BR36 47J(BR) BR37 47J(BR) BR28 47J(BR) BR27 47J(BR) BR24 47J(BR) BR25 47J(BR) 47J 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 D15/A_1 A0 A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 A11 A12 A13 A14 A15 A16 A17 A18 A19 A20 D0 D1 D2 D3 D4 D5 D6 D7 D8 D9 D10 D11 D12 D13 D14 D15/A_1 D16 D17 D18 D19 D20 D21 D22 D23 D24 D25 D26 D27 D28 D29 D30 D31 RP RY/BY BYTE VCCW 1CE 2CE N.C OE WP WE N.C VCC GND VCC GND GND GND N.C 6 DG (1) (1) 1 2 3 4 R210 0 0 0 33J 0 R192 R183 R189 R212 0 0 0 0 0 R180 R211 R191 R190 R179 5 C24 E0 E1 E2 VSS 5 8 7 6 5 0.1uF VCC WC SCL SDA IC7 CAT24WC02PI WE3- WE2- (1) CKE ( 1,3,5 ) CKIO ( 1,5 ) WE1- ( 1,5 ) WE0( 1,5 ) RD/WR(1) CASL( 1 ) RAS3L(1) CS3- DMM2-SD72AR-1131-F 12 13 14 15 16 17 18 28 31 32 29 33 34 36 65 66 67 68 69 70 71 41 2 3 4 5 6 7 8 9 21 22 23 24 25 26 27 35 37 38 49 50 51 52 53 54 56 57 58 60 59 62 63 64 19 45 48 55 40 42 43 44 46 47 11 10 30 61 1 20 39 72 FLASH-ROM /Pbg CN4 6 +3.3V(F) TP339 TP458 TP353 TP338 TP295 TP337 TP424 TP415 TP398 TP413 CA14 CA15 DG RESET ( 5,7 ) SCL (1) SDA (1) +3.3V(F) 4 DG CA14 CA15 +3.3V(F) 4 0.1uF DG DG TP354 TP296 0.1uF C138 7 4.7kJ 4.7kJ R43 R44 0.1uF C134 0.1uF 0.1uF C137 C132 0.1uF 0.1uF C136 C131 0.1uF C104 C101 0.1uF C102 0.1uF AR-FX12 ELECTRICAL SECTION 8-9 C103 8 3 3 VSS VSSQ VSSQ VSSQ VSSQ VSS VSS VDD VDD VDD VDDQ VDDQ VDDQ VDDQ NC NC BA0 BA1 CKE CLK UDQM \CS LDQM \WE \CAS \RAS IC23 DQ15 DQ14 DQ13 DQ12 DQ11 DQ10 DQ9 DQ8 DQ7 DQ6 DQ5 DQ4 DQ3 DQ2 DQ1 DQ0 A11 A10(AP) A9 A8 A7 A6 A5 A4 A3 A2 A1 A0 53 51 50 48 47 45 44 42 13 11 10 8 7 5 4 2 35 22 34 33 32 31 30 29 26 25 24 23 IC24 VSSQ VSSQ VSSQ VSSQ VSS VSS VSS VDD VDD VDD VDDQ VDDQ VDDQ VDDQ NC NC LDQM \WE \CAS \RAS \CS BA0 BA1 CKE CLK UDQM DQ15 DQ14 DQ13 DQ12 DQ11 DQ10 DQ9 DQ8 DQ7 DQ6 DQ5 DQ4 DQ3 DQ2 DQ1 DQ0 A11 A10(AP) A9 A8 A7 A6 A5 A4 A3 A2 A1 A0 53 51 50 48 47 45 44 42 13 11 10 8 7 5 4 2 35 22 34 33 32 31 30 29 26 25 24 23 MT48LC4M16A2TG-75 12 46 6 52 28 41 54 1 14 27 3 49 9 43 36 40 15 16 17 18 19 20 21 37 38 39 MT48LC4M16A2TG-75 12 46 6 52 28 41 54 1 14 27 3 49 9 43 36 40 15 16 17 18 19 20 21 37 38 39 SDRAM(N) 2 TP358 TP357 TP356 TP379 TP355 TP378 TP377 TP376 TP425 TP426 TP460 TP427 TP428 TP429 TP430 TP443 TP325 TP326 TP299 TP285 TP324 TP298 TP315 TP297 TP414 TP416 TP417 TP419 TP418 TP420 TP421 TP422 2 5 6 7 8 5 6 7 8 5 6 7 8 5 6 7 8 5 6 7 8 5 6 7 8 8 7 6 5 8 7 6 5 4 3 2 1 4 3 2 1 4 3 2 1 4 3 2 1 4 3 2 1 4 3 2 1 1 2 3 4 1 2 3 4 BR32 47J(BR) BR31 47J(BR) BR17 47J(BR) BR26 47J(BR) BR23 47J(BR) BR22 47J(BR) BR15 47J(BR) BR16 47J(BR) CD31 CD30 CD29 CD28 CD27 CD26 CD25 CD24 CD23 CD22 CD21 CD20 CD19 CD18 CD17 CD16 CA13 CA12 CA11 CA10 CA9 CA8 CA7 CA6 CA5 CA4 CA3 CA2 CD15 CD14 CD13 CD12 CD11 CD10 CD9 CD8 CD7 CD6 CD5 CD4 CD3 CD2 CD1 CD0 CA13 CA12 CA11 CA10 CA9 CA8 CA7 CA6 CA5 CA4 CA3 CA2 1 1 A B C D [08]ELECTRICALSECTION.fm 9 ページ 2004年10月26日 火曜日 午後3時46分 MDMC PWB (2/8) CD[0:31] CA[1:23] CA[1:23] A B C D 1 (5) N.M 8 TRJ-TWE 2 CD[0:31] DG +3.3V(F) C130 47uF/25V DG +MDM1.8V C146 47uF/25V N.M RB751V40 D13 N.M RB751V40 DG +3.3V(F) N.M D14 TP80 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 R213 47KJ +3.3V(F) 3 BR35 47J(BR) BR42 47J(BR) BR43 47J(BR) BR47 47J(BR) 74LVX08 +3.3V(F) 2 1 IC6A NDPRD C140 1000pF(B) IORES0- ( 1 ) IRQMDM- ( 5 ) IOWR0( 5 ) IOWR1- TPW14 N.M CA[1:23] ( 1,5 ) CS5- CA1 CA2 CA3 CA4 CA5 CA6 CA7 CA8 CA9 CA10 CA11 CD0 CD1 CD2 CD3 CD4 CD5 CD6 CD7 CD8 CD9 CD10 CD11 CD12 CD13 CD14 CD15 C153 ( 1,2,5 ) CA[1:23] C175 ( 1,2,5 ) CD[0:31] C156 DG TP505 TP464 +3.3V(F) CKIO RD- ( 1,2,5 ) ( 1,2 ) 7 4.7kJ DG 9 21 42 62 86 97 52 53 34 3 15 30 44 68 78 92 54 55 45 46 48 49 50 26 33 31 29 28 27 36 37 51 41 1 72 71 73 75 74 84 85 87 88 90 91 93 94 95 96 98 100 2 4 6 7 8 10 12 13 14 16 18 19 20 22 24 25 11 VDD2 VDD2 VDD2 VDD2 VDD2 VDD2 REGOUT REGOUT AVDD VDD3 VDD3 VDD3 VDD3 VDD3 VDD3 VDD3 VDDREG VDDREG SCANNT MINTEST INTEST MODE0 MODE1 TDO DBGMOD TDI NDBGREQ TMS TCK PLLON CNT LON NRESET T3IRQ NLB NUB NDPWR NDPCS NDPRD DPA00 DPA01 DPA02 DPA03 DPA04 DPA05 DPA06 DPA07 DPA08 DPA09 DPA10 DPA11 DPD00 DPD01 DPD02 DPD03 DPD04 DPD05 DPD06 DPD07 DPD08 DPD09 DPD10 DPD11 DPD12 DPD13 DPD14 DPD15 IC27 IC12E 74LCX04 47J TP607 TP602 TP601 TP568 TP567 TP543 TP540 TP544 TP566 TP541 TP542 TP520 TP518 TP519 TP506 TP486 TP504 +3.3V(F) R160 R19 8 7 6 5 8 7 6 5 8 7 6 5 8 7 6 5 C163 0.1uF 0.1uF C139 C145 0.1uF C141 0.1uF C142 0.1uF C171 0.1uF 0.1uF C160 C185 0.1uF 0.1uF C184 0.1uF C182 0.1uF 0.1uF C183 0.1uF 0.1uF 7 10 R263 N.M TP106 R261 33J IC12C 5 74LCX04 N.M 33J 6 9 35 5 11 17 23 32 40 47 56 64 70 80 89 99 57 58 76 77 79 81 82 83 65 66 69 67 59 60 63 61 43 38 39 6 TP488 TP487 TP131 1 2 3 4 CN9 47J TP636 R262 33J TP631 N.M B4B-PH-K-S 1 2 3 4 N.M DG 3 2 47KJ R250 R201 33J Q D CLK Q 5 TP343 TP445 1 3 DG TP637 TP632 TP633 R259 47J 5 DG OE OUT 11 12 TP306 TP321 TP344 TP362 TP364 TP361 TP363 TP360 TP359 TP395 TP394 TP402 TP342 TP332 TP330 TP331 TP320 TP319 TP304 TP294 C115 C114 10uF/16V 0.1uF TP303 +3.3V(F) R224 10KJ TP396 TP380 TP545 TP365 +3.3V(F) DG 47J 47J 47J IC28A 74LCX74 6 5 TP400 X3 CLK D +3.3V(F) C121 0.1uF DG OUT- OUT+ 4 DG 8 IC28B 74LCX74 Q Q 9 4 C94 0.1uF VCM AG C95 0.1uF C83 10uF/16V N.M 2 R193 0 AG VCM AG 3 C106 47uF/25V C86 0.1uF 2 82k(1%) R170 ADJ OUT IN R182 N.M 0 N.M + - 5 6 AG R127 150k(1%) R181 0 TP305 2 TRJ-TWE AG AG N.M 2 C105 47uF/25V TP287 +REF(F) TPW8 1 N.M C116 0.1uF 3 + - AG 1 +5V(F) DG NF2 MMZ1608S121AT 3 NF1 ZJSR5101-102 +REF(F) R206 N.M 0 N.M C126 1uF(FILM) R207 N.M 0 N.M C122 1uF(FILM) D7 RB751V40 +M3.3VA(F) IC18A TS922D D6 RB751V40 1 C65 0.1uF AG C66 N.M 0.1uF-D 100pF(CH) C91 N.M 82k(1%) R166 C96 100pF(CH) 3 2 TP208 10kJ R128 TP178 56k(1%) AG TP291 N.M 100pF(CH) LM1117MPX3.3 IC21 N.M R156 N.M 0 0 R155 IC18B TS922D 7 R126 N.M C57 R171 0 +REF(F) 2 TP292 R147 0 R146 N.M 0 N.M 82k(1%) R165 TP286 TP250 VCM C117 0.1uF +12V(F) +M3.3VA(F) AG +REF6V(F) C64 2200pF(B) 1.2kJ R148 R172 N.M 0 N.M TP277 R157 82k(1%) TP276 C92 680pF(B) TP293 +REF(F) R169 36k(1%) R164 36k(1%) R168 N.M 100kJ +M3.3VA(F) C81 C82 10uF/16V 0.1uF C84 10uF/16V AG TRJ-TWE TPW12 1 N.M C93 0.1uF TP302 TP290 NDPRD TP638 21 33 31 20 32 R177 10kJ C85 TP269 0.1uF TP329 28 R176 10kJ D11 N.M RB751V40 TP341 19 VCM R162 N.M 100kJ 3 N.M C118 N.M 1uF(FILM) +REF6V(F) N.M +M3.3VA(F) N.M D10 N.M RB751V40 R178 10kJ N.M C79 N.M 1uF(FILM) R167 0 R163 0 N.M C78 N.M 1uF(FILM) TP328 27 30 29 40 39 47J DGND DG TP639 TP634 R260 AGND1 AGND2 C187 0.1uF AVDD VREF- VCM VREF+ AUXIN- AUXIN+ DVDD NC NC NC NC NC NC NC NC NC NC NC NC NC NC NC NC NC NC NC NC TSTD1 HC1 HC0 TS PDOWN_B MS RESET_B IN- IN+ STLC7550TQF7 SCLK FS DIN DOUT MCM XTALO XTALI/MCLK IC22 2 4 +3.3V(F) 6 5 1 2 10 11 12 13 14 22 23 24 25 26 34 35 36 37 38 46 47 48 43 15 16 42 17 18 41 3 4 44 45 7 8 9 GND VDD SG-710ECK(24.576MHz) N.M TP401 4.7kJ +3.3V(F) R199 R198 R197 N.M R202 +3.3V(F) +3.3V(F) 47KJ 47KJ 47KJ 47J +3.3V(F) R254 R253 R252 R251 47KJ R258 8 TP130 DG DG +3.3V(F) R249 47KJ TP606 TP604 TP616 TP569 TP605 TP586 R226 47KJ DG TP570 +3.3V(F) DG R227 10KJ TP507 TP522 TP521 R225 TP489 R214 TP475 33J IC12D 74LCX04 AVSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS EYECLK EYEDAT GPIO0 GPIO1 GPIO2 GPIO3 GPIO4 GPIO5 BBITCLK BSPCLK BTXD BRXD TP635 MN195006E ABITCLK ASPCLK ATXD ARXD CLKOUT CXOUT CXIN 6 CL 8 PR 4 1 10 CL 14 PR VCC GND 7 AR-FX12 ELECTRICAL SECTION 8-10 13 8 4 1 1 SIGRX SIGTX (4) (4) MDMC PWB (3/8) 1 A B C D [08]ELECTRICALSECTION.fm 10 ページ 2004年10月26日 火曜日 午後3時46分 A B SPSELA SPSELB (5) (5) 2 N.M 8 TR3 DTC143Z TR4 DTC143Z 2 2 R117 2.2kJ DG C55 4700pF(B) DG DG C39 SIGTX SIGRX TRJ-TWE DG DG 3 3 R82 R83 R80 7 R78 10kJ +12V(F) R79 10kJ +12V(F) 0.1uF(FILM) R84 100kJ +REF6V(F) R81 18kJ C157 1 10kJ R118 BZ (5) +12VS(F) 39kJ 9.1kJ 91kJ DG C97 N.M TPW13 AG +12V(F) 0.1uF-D TP110 TP109 TP111 TP152 TP95 TP112 AG DG 1 5 2 4 6 10 9 12 14 15 11 VEE VSS VDD Y X 6 CD4052BC Y0 Y1 Y2 Y3 INH A B X0 X1 X2 X3 IC13 +5V(F) 47J 47J 47uF/25V C158 R137 R234 0.1uF-D 47J 47J 47J 47J 47J 47uF/25V C98 R229 R230 R231 R232 R233 47uF/25V C120 (HS1-) (HS2-) (RHS) (EXHS-) (CI-) (CION) (MR) (S) (CML) (DP) (RCVMUTE-) (MICMUTE-) (VRSEL1-) (VRSEL2-) (VRSEL3-) (EC) (CDIN-) (FNETD-) 7 8 16 3 13 AG (5) (5) (5) C56 0.1uF-D VOLC VOLB VOLA +REF6V(F) TP151 TP153 +12V(F) DG R85 10kJ 5 TP181 + - AG TR5 DTC143Z TR6 DTC143Z TR7 DTC143Z 3 2 18kJ 2 2 2 1 DG DG DG 3 3 3 IC14A NJM4558 AG TP179 TP587 TP180 4 R69 10kJ +5V(F) R70 10kJ +5V(F) R71 10kJ +5V(F) DG D18 RB751V40 4 R89 R90 R91 R88 R133 R130 R132 R131 D17 RB751V40 +5V(F) TP588 TP589 TP590 TP591 TP592 BLM15A-601 BLM15A-601 BLM15A-601 BLM15A-601 BLM15A-601 BLM15A-601 BLM15A-601 BLM15A-601 BLM15A-601 BLM15A-601 BLM15A-601 TP116 TP608 C67 0.1uF(FILM) 1000pF(B) R242 R241 R240 R239 R238 R237 R222 R221 R220 R219 R218 +12V(F) C58 0.1uF-D R129 C59 0.01uF C169 0 0 0 0.01uF C168 R217 R228 R215 0.01uF C167 (SIGRX) (TELID) (SIGTX) 5 0.01uF C166 C 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 0.1uF C119 +5V(F) 0.01uF C165 D 6 0.01uF C164 CN6 30FE-BT-VK-N 7 0.01uF C151 1kJ 0.01uF C150 1kJ 0.01uF C149 R243 0.01uF C148 R244 0.01uF C147 8 4 TEL/LIU IF 1 1 1 1 AR-FX12 ELECTRICAL SECTION 8-11 1 8 0 3kJ 6.8kJ 12kJ 20kJ 36kJ 68kJ 100kJ 6 11 10 9 TP136 TP134 TP115 DG 13 14 15 12 1 5 2 4 (5) (5) (5) (5) (6) (5) (5) (5) (5) (5) (5) (5) (5) (5) (5) (5) (6) (6) (3) (1) (3) TP137 TP138 TP139 TP135 TP170 TP168 TP183 TP182 HS1HS2RHS EXHSCICION MR S CML DP RCVMUTEMICMUTEVRSEL1VRSEL2VRSEL3EC CIDINFNETD- SIGRX TELID SIGTX VEE VSS VDD X 3 (5) 7 8 16 3 SPMUTE- CD4051BC INH A B C X0 X1 X2 X3 X4 X5 X6 X7 IC15 AG +12V(F) C40 47uF/25V 3 AG 2 DG 3 2 5 6 + - TP209 TP184 TP185 TP171 R135 51kJ R106 10kJ +5V(F) 7 4 2 3 C60 1000pF(B) C71 4.7uF/50V DG IC14B NJM4558 R136 100kJ 2 C72 4.7uF/50V DG C32 0.1uF TP114 R134 6.8kJ TR10 DTC143Z C34 0.1uF +5V(F) DG AG TP169 R86 33kJ R87 33kJ +12V(F) 1 C29 0.1uF AG DG 1 SPSP+ 1 2 CN5 B2B-PH-K-S 1 2 SP OUT DG 4.7uF/50V C28 +5V(F) C41 4.7uF/50V +REF6V(F) AG IC16 NJM2113M 5 C33 0.1uF TP113 1 MDMC PWB (4/8) 6 1 7 8 A B C D [08]ELECTRICALSECTION.fm 11 ページ 2004年10月26日 火曜日 午後3時46分 A B C +3.3V(F) (7) 0.1uF C174 0.1uF C162 8 0.1uF C173 11 27 39 C159 0.01uF DG VSSQ VSSQ VSSQ VSSQ VSS VSS VSS VDD VDD VDD VDDQ VDDQ VDDQ VDDQ NC NC LDQM \WE \CAS \RAS \CS BA0 BA1 CKE CLK UDQM 87 93 N.M RB751V40 D16 N.M RB751V40 DG 78 DQ15 DQ14 DQ13 DQ12 DQ11 DQ10 DQ9 DQ8 DQ7 DQ6 DQ5 DQ4 DQ3 DQ2 DQ1 DQ0 A11 A10(AP) A9 A8 A7 A6 A5 A4 A3 A2 A1 A0 N.M D15 +3.3V(F) 53 12 46 6 52 28 41 54 1 14 27 3 49 9 43 36 40 15 16 17 18 19 20 21 37 38 39 TP560 TP559 TP536 TP557 TP558 TP535 TP556 TP555 TP537 TP561 TP562 TP538 TP564 TP563 TP539 TP565 TP534 TP600 TP553 TP533 TP551 TP552 TP550 TP549 TP583 TP598 TP584 TP599 104 142 157 170 TP228 130 47J 47J R188 R187 TP307 117 51J 51J 47J 47J R204 R203 R208 R209 100J 100J TP447 TP446 TP432 TP256 DG R255 R223 196 TP323 TP334 TP434 TP406 TP435 TP403 TP404 TP466 TP433 TP405 TP449 TP448 TP490 TP477 TP467 TP476 TP465 TP547 TP571 TP546 TP523 TP524 TP508 TP509 TP491 MD15 MD14 MD13 MD12 MD11 MD10 MD9 MD8 MD7 MD6 MD5 MD4 MD3 MD2 MD1 MD0 MA11 MA10 MA9 MA8 MA7 MA6 MA5 MA4 MA3 MA2 MA1 MA0 183 MT48LC4M16A2TG-75 53 51 50 48 47 45 44 42 13 11 10 8 7 5 4 2 35 22 34 33 32 31 30 29 26 25 24 23 DG 1 14 26 7 40 52 79 88 94 105 118 143 156 169 6 ( 1,2,3 ) CD[0:31] ( 1,2,3 ) CA[1:23] 131 195 C109 10pF(CH) C108 10pF(CH) 182 DG 0.22uF 0.22uF 0.22uF 0.22uF 0.22uF 0.22uF 0.22uF 0.22uF 0.22uF 0.22uF 0.22uF 0.22uF 0.22uF 0.22uF 0.22uF 0.22uF C177 C155 C143 C125 C107 C110 C111 C112 C113 C127 C144 C152 C181 C180 C179 C178 208 +3.3V(F) DTXD1 DRXD1 DRTS1 DCTS1 WAITIRQ3- (1) (1) (8) (8) (8) (8) CS0CS2CS4CS5CS6BSRD/WRWE0WE1- IOWR0IOWR1- CKIO ( 1,2,3 ) ( 1,2 ) (1) (1) ( 1,3 ) (1) (1) ( 1,2 ) ( 1,2 ) ( 1,2 ) (3) (3) RESET ( 2,7 ) RESET1- 0.1uF C172 DG 0.1uF C161 TP412 TP499 0.1uF C133 D TP595 TP619 TP596 TP597 TP620 TP621 TP613 TP554 TP498 TP618 0.1uF C135 LDQM MWECASRASMCSBS0 BS1 MCLKE MCLK UDQM GND GND TRST TCK TMS TDI TDO TESTB_R TESTB_U TTHR_U VDD TRES RES GND CLK GND CS0 CS3 CS4 CS5 CS6 BS RD/WR WE0 WE1 GND VDD WAIT IRQ CSROM CSMDM CSQMC GND CSSP[0] CSSP[1] IORD IOWR[0] IOWR[1] VDD GND DPACK ROM5V OEAB OEBA CBA GND TXD RXD RTS CTS GND GND TP381 5 X2 AT-51(14.745MHz) R196 56J 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 IC25 FAX-G/A 5 4 REC- TP593 UPD65946GD 4 CA1 CA2 CA3 CA4 CA5 CA6 CA7 CA8 CA9 CA10 CA11 CA12 CA13 CA14 CA15 CA16 CA17 CA18 CA19 CA20 CA21 6 CA22 CA23 CD0 BR1847J(BR) 1 8 TP368 CD1 2 7 TP369 CD2 3 6 TP346 CD3 4 5 TP370 IC26 3 3 CD8 BR2047J(BR) 1 8 TP311 CD9 2 7 TP312 CD10 3 6 TP313 4 5 TP314 CD11 7 TP347 TP371 TP309 TP310 CD4 BR1947J(BR) 8 1 CD5 7 2 CD6 3 6 CD7 4 5 IORES1- TP348 TP349 TP350 TP335 8 7 6 5 8 TP572 TP573 TP492 TP525 TP510 GND GND MCLK MCLKE MUDQM MLDQM MWE GND MCAS MRAS MCS MBS[1] MBS[0] GND VDD MA[11] MA[10] MA[9] MA[8] MA[7] GND MA[6] MA[5] MA[4] MA[3] GND VDD MA[2] MA[1] MA[0] MD[15] MD[14] GND MD[13] MD[12] MD[11] MD[10] MD[9] GND VDD MD[8] MD[7] MD[6] MD[5] MD[4] GND MD[3] MD[2] MD[1] MD[0] GND GND 208 207 206 205 204 203 202 201 200 199 198 197 196 195 194 193 192 191 190 189 188 187 186 185 184 183 182 181 180 179 178 177 176 175 174 173 172 171 170 169 168 167 166 165 164 163 162 161 160 159 158 157 VDD SCLK BSSEL PORTD[7] PORTD[6] PORTD[5] GND PORTD[4] PORTD[3] PORTD[2] PORTD[1] PORTD[0] VDD GND PORTC[7] PORTC[6] PORTC[5] PORTC[4] PORTC[3] GND PORTC[2] PORTC[1] PORTC[0] PORTB[7] PORTB[6] VDD GND PORTB[5] PORTB[4] PORTB[3] PORTB[2] PORTB[1] GND PORTB[0] PORTA[7] PORTA[6] PORTA[5] PORTA[4] VDD GND PORTA[3] PORTA[2] PORTA[1] PORTA[0] IORES[2] GND IORES[1] IORES[0] MANRES CI BZ VDD VDD SXTO SXTI GND A[1] A[2] A[3] A[4] A[5] A[6] A[7] A[8] A[9] A[10] A[11] A[12] A[13] A[14] A[15] A[16] A[17] A[18] A[19] A[20] A[21] VDD GND A[22] A[23] GND D[0] D[1] D[2] D[3] VDD GND D[4] D[5] D[6] D[7] VDD GND D[8] D[9] D[10] D[11] GND D[12] D[13] D[14] D[15] VDD 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 47J(BR) AR-FX12 ELECTRICAL SECTION 8-12 CD12 BR21 1 2 CD13 3 CD14 4 CD15 156 155 154 153 152 151 150 149 148 147 146 145 144 143 142 141 140 139 138 137 136 135 134 133 132 131 130 129 128 127 126 125 124 123 122 121 120 119 118 117 116 115 114 113 112 111 110 109 108 107 106 105 TP580 TP610 TP594 TP478 TP79 TP579 TP615 TP154 TP630 TP531 TP623 TP529 TP629 TP578 TP530 TP576 TP528 TP577 TP614 TP624 TP575 TP527 TP626 TP625 TP574 TP526 TP627 TP628 TP622 TP322 R246 R247 R248 R245 2 TP397 TP411 TP384 TP385 TP440 TP407 TP408 TP409 TP410 BR29 47J(BR) BR30 47J(BR) BR34 47J(BR) BR33 47J(BR) BR40 47J(BR) TP469 TP472 TP471 TP473 TP452 TP453 TP436 TP438 TP437 TP439 BR41 47J(BR) BR46 47J(BR) BR45 47J(BR) TP482 TP517 TP516 TP515 TP497 TP480 TP479 TP495 TP481 TP532 TP496 TP494 TP513 TP514 BR44 47J(BR) 4 3 2 1 4 3 2 1 4 3 2 1 5 6 7 8 5 6 7 8 5 6 7 8 5 6 7 8 4 3 2 1 4 3 2 1 4 3 2 1 5 6 7 8 5 6 7 8 4 3 2 1 4 3 2 1 4 3 2 1 5 6 7 8 5 6 7 8 5 6 7 8 TP612 TP611 TP617 TP609 R236 R235 0 47J 47J 47J TP582 TP581 TP548 TP512 TP511 2 47J 47J 1 MD3 MD2 MD1 MD0 MD7 MD6 MD5 MD4 MD11 MD10 MD9 MD8 MA3 MA2 MA1 MA0 MD15 MD14 MD13 MD12 MA7 MA6 MA5 MA4 MA11 MA10 MA9 MA8 RASMCSBS1 BS0 MCLK MCLKE UDQM LDQM MWECAS- IORES0MANRESCINBZ PICCKEC SPMUTEMR IORES2- VRSEL1PICRES CION FNETON PICVPP VOLC VOLB VOLA VRSEL3VRSEL2- SPSELB SPSELA CML S 1 RESMFP MWAIT DP RCVMUTEMICMUTE- F-NETDRHS EXHSHS2HS1- (3) (7) (6) (4) (6) (4) (4) (4) (2) (4) (6) (4) (6) (6) (4) (4) (4) (4) (4) (4) (4) (4) (4) (8) (6) (4) (4) (4) (6) (4) (4) (4) (4) A B C D [08]ELECTRICALSECTION.fm 12 ページ 2004年10月26日 火曜日 午後3時46分 MDMC PWB (5/8) A B C D PICCK- +5VS(F) R158 10kJ PICDI- 8 ( 8 ) MSW_OFF ( 1 ) PICDO- (1) R116 1kJ +5VS(F) R114 1kJ R140 1kJ ( 4 ) CIDIN(CI Detect TEL PWB(OLD)) +3.3V(F) (5) ( 5 ) PICRES ( 2,7,8 ) FAX_VPP ( 5 ) PICVPP ( 5 ) FNETON (FNET Detect permission) ( 5 ) MWAIT (Sleep demand) R159 10kJ +5VS(F) ( 4 ) FNETD(1300Hz / detect Combination) CI(CI 10-75Hz) 2 3 4 3 DG 3 3 3 3 TR12 DTC143Z DG DG 7 10 IC19E 74HC14 DG 3 DG 2 13 2 R139 1kJ +5VS(F) 3 C100 0.1uF-D DG R111 1kJ +5VS(F) DG DG TP235 IC19F 74HC14 12 DG 3 TP210 TP253 2 7 6 N.M 0 PIC16F630 RA5/T1CKI/OSC1/CLKIN RC3 RC4 RA2/COUT/T0CKI/INT 1SS355 IN OUT DG DG C9 0.1uF 1 C10 47uF/25V 1 5 VSS VDD TRJ-TWE 2 +5VS(F) N.M TPW3 PIC13 TP240 13 RA0/CIN+/ICSPDAT [Download:DATA] PIC12 TP227 12 RA1/CIN-/ICSPCLK [Download:CLK] RC2 RC5 RC1 RA4/T1G/OSC2/CLKOUT RC0 IC20 N.M R119 5 PIC4 TP260 4 RA3/MCR/VPP [Download:VPP] PIC2 PIC7 TP270 11 PIC11 TP239 PIC6 3 TP254 PIC3 NJM78L05A IC8 D2 C35 0.1uF-D 6 +12VS(F) 47J C44 47uF/25V TP186 R108 +5VS(F) C68 0.1uF 11 TR13 DTC143Z 2 3 D8 TP278 1SS355 D9 1SS355 R154 4.7kJ +5VS(F) TR27 DTA114E 3 R153 10kJ +5VS(F) +5VS(F) TR19 TR20 DTC143Z DTC143Z DG DG R113 1kJ TR14 DTC143Z 3 2 TR21 DTC143Z DG 2 2 2 +12V(F) 47J +5VS(F) TP155 R107 R186 10kJ 47J 6 TP236 R144 R184 10kJ DG TP333 3 TP271 TR18 DTC143Z DG 2 TR9 DTC143Z 2 TR29 DTC143Z 2 TR17 DTC143Z C53 1000pF(B) DG R112 10kJ DG 2 3 IC19B 74HC14 2 IC19A 74HC14 TR26 DG DTC143Z C61 1000pF(B) DG R110 10kJ DG R138 10kJ DG R194 10kJ DG R152 10kJ DG R185 10kJ DG C87 1000pF(B) DG C88 1000pF(B) DG 1 1 1 1 1 1 1 1 1 1 1 (4) 7 TP156 TP261 1 +5VS(F) 1 14 1 8 5 9 10 DG C69 0.1uF +5VS(F) 4 TP255 PIC8 TP259 PIC5 TP237 PIC9 TP238 PIC10 4 DG R145 10kJ 2 2 2 2 2 DG 1 DG 1 DG 1 DG 1 DG 1 8 G AR-FX12 ELECTRICAL SECTION 8-13 2 TP252 TP262 TR24 DTC143Z 3 TR22 DTC143Z 3 TR23 DTC143Z 3 TR11 DTC143Z 3 TR28 DTC143Z 3 3 3 R150 4.7kJ +3.3V(F) R149 1kJ +5VS(F) R109 1kJ +3.3V(F) R195 1kJ +3.3V(F) 9 5 6 8 R101 TP251 R173 47kJ R174 1kJ TP211 IC19D 74HC14 DG 3 TP140 IC19C 74HC14 TR16 DTC143Z 2 1 2 TP119 2 DG TR25 2SD592A R115 DCPR +12VS(F) 1 2 3 (5) 1 MSW_OFF2 ( 1 ) B3B-PH-K-S 1 2 3 Night time power supply connector CN7 (8) PRON_FAX ( 8 ) F-NETD- ( 5 ) CIN- 1 750J(1/4W)-D VLED C99 0.1uF-D DG D12 1SS355 TR15 DTA114E 3 +12VS(F) TP308 47J 2 MDMC PWB (6/8) 1 A B C D [08]ELECTRICALSECTION.fm 13 ページ 2004年10月26日 火曜日 午後3時46分 A B N.M TPW10 1 +5V(F) N.M MANRES- 8 +12V(F) N.M TRJ-TWE 2 TRJ-TWE 2 N.M DG TRJ-TWE 2 N.M DG 1 TPW6 1 N.M RESET- TPW5 DG C1012 TPW7 1 AG 1 2 3 4 5 6 1 2 3 4 5 6 +3.3V(F) DG B6P-VH TRJ-TWE 2 N.M CN8 Power supply connector R18 R17 4.7kJ +3.3V(F) 74LVX14 47J 5 7 DG +12VS(F) N.M 1 N.M 2 N.M DG DG 6 N.M 2 TRJ-TWE C186 1 +M3.3VA(F) +5VS(F) 10 9 5 DG AG DG N.M 2 8 5 DG RES OUT C170 DG R65 1kJ R66 1kJ 2 DG C27 0.1uF TP26 TP18 R67 1kJ TP85 TR8 2SA1577 +3.3V(F) DG C11 10uF/16V Pat connect N.M 10 2 1 2 1 74LVX14 IC5E 100uF/25V 0.1uF C154 11 R64 N.M +5V(F) 10J(1W) D3 HZU2.0B TP68 RES OUT PST591IMT N.M GND VCC IC3 TP53 4 3 GND PST591CMT VCC 4 IC2 3 +5V(F) TRJ-TWE C124 1 TPW15 74LVX08 IC6C DG 0.1uF N.M C4 +3.3V(F) N.M C3 0.1uF +5V(F) 100uF/25V 0.1uF C123 +3.3V(F) TP78 100uF/25V 0.1uF-D C176 6 TPW11 74LVX08 IC6B +12V(F) TP20 5 4 TRJ-TWE TPW16 74LVX14 6 TP75 C1001 0.1uF DG C1013 0.1uF 4 C1015 0.1uF C1031 0.1uF C1002 0.1uF C23 1000pF(B) C1014 3 C1016 0.1uF C1032 0.1uF C1003 C (5) C1009 0.1uF 10pF(CH) C1007 C1008 0.1uF 10pF(CH) C1005 C1025 0.1uF C1034 0.1uF ( 8 ) FAX_RES- N.M C1010 0.1uF 10pF(CH) C1033 C1011 0.1uF C1006 0.1uF C1029 0.1uF 10pF(CH) C1000 0.1uF N.M C1017 0.1uF C1030 0.1uF 150pF(CH) C1004 10pF(CH) C1035 IC5C N.M TP94 C1019 0.1uF 0.1uF C1024 IC5B C1020 0.1uF 0.1uF C1026 R45 10kJ C1021 0.1uF 0.1uF C1027 D C1022 0.1uF +5V(F) N.M 6 C1023 0.1uF 0.1uF C1028 0.1uF C1036 4 4 (1) DG N.M TPW4 5 4 N.M 2 R104 C26 0.1uF TP39 R15 470J R105 TP76 3 3 27kJ R16 1kJ DG TP19 DG 3 N.M 2 DG 3 2 TP108 74LVX14 12 IC5F DG IC12F 74LCX04 DG TP132 3 4 DG 74LCX04 IC12B 13 12 1 ( 2,5 ) RESET- TP107 74LVX08 11 DG +3.3V(F) 1 ROM_VPP ( 1 ) TP54 0.1uF 470J N.M +3.3V(F) ( 1,8 ) RESET1- ( 5 ) RESET 470J N.M IC6D C25 13 +3.3V(F) R62 C36 DG TP36 R63 47J 47J SLR-322VC N.M LED1 SLR-322VC 0.1uF DG 12 R100 R46 STATUS-LED LED2 TP133 TP52 TP51 2 +3.3V(F) TR1 DTC143Z DG DG 1KJ 13 2 74LCX04 2 IC12A +3.3V(F) N.M 8 74LVX14 IC5D TR2 DTC143Z R9 R10 1kJ 0.1uF C8 1 9 +3.3V(F) +3.3V(F) 47J +3.3V(F) C12 47uF/6.3V +1.8V(F) TRJ-TWE IC4 uPC3018 NC OUT 1 2 74LVX14 IC5A PTC4 PTC2 1SS355 (1) ON/OFF IN 1 SLR-322VC ( 2,6,8 ) FAX_VPP 1 2 D1 DG TP77 POWER-LED LED3 R14 4.7kJ +3.3V(F) GND 3 1 7 N.M 0.1uF N.M 0.1uF N.M C1018 0.1uF 1 3 GND (Fin) 6 1 8 14 14 7 AR-FX12 ELECTRICAL SECTION 8-14 7 14 MDMC PWB (7/8) 7 A B C D [08]ELECTRICALSECTION.fm 14 ページ 2004年10月26日 火曜日 午後3時46分 A B C CCTS2 CRXD2 (1) (1) 8 (5) RESMFP ( 6 ) PRON_FAX CTXD2 CRTS2 (1) (1) DTXD1 DRTS1 DCTS1 DRXD1 (5) (5) (5) (5) +3.3V(F) +3.3V(F) TP345 TP366 4.7kJ R40 R35 4.7kJ +3.3V(F) 47J 47J R102 R103 4.7kJ 4.7kJ R256 R257 C2+ 5 C46 TP81 7 TP97 TP118 TP96 TP117 DG +5VS(F) R1IN R2IN TD62503 COM-E N.C 8 OUT1 OUT2 OUT3 OUT4 OUT5 OUT6 OUT7 IN1 IN2 IN3 IN4 IN5 IN6 IN7 IC9 MAX3225E 9 16 15 14 13 12 11 10 FORCEON VCC FORCEOFF GND 1 2 3 4 5 6 7 14 20 1 TP99 TP98 TP37 R1OUT R2OUT 15 10 T1OUT T2OUT V- V+ READY INVALID T1IN T2IN 13 12 6 C2- C2+ 0.1uF-D C1- 5 C1+ 4 0.1uF-D 2 IC10 MAX3225E FORCEON VCC FORCEOFF GND 14 20 TP38 READY INVALID 1 TP83 R1IN R2IN T1OUT T2OUT 15 10 TP84 TP67 C47 T1IN T2IN 13 12 R1OUT R2OUT C2- 6 0.1uF-D C50 C1- 4 V- 19 18 11 16 9 17 8 7 3 19 18 11 16 9 17 8 7 3 R41 R38 TP24 TP66 6 TP56 TP61 TP62 TP59 TP60 TP57 TP58 TP55 RES_MFPPRON_FAXFAX_PWON- (7) FAX_RES( 6 ) MSW_OFF (6) VLED ( 2,6,7 ) FAX_VPP DG 0.1uF C21 +3.3V(F) TP1 TP13 R36 R33 TP21 TP63 TP65 R37 R34 DG TP22 TP64 0.1uF-D C45 DG 0.1uF-D C48 DG 0.1uF C22 +3.3V(F) TP23 R42 R39 DG TP25 TP82 0.1uF-D C49 DG C52 V+ 0.1uF-D C1+ 0.1uF-D 2 C51 R32 R31 R30 R3 R29 0 0 0 0 0 0 0 0 5 5 N.M 47J 47J 0 0 0 DG CNCT_ FAX- FAX_RTS0 FAX_CTS0 FAX_TXD0 FAX_RXD0 FAX_RTS1 FAX_CTS1 FAX_TXD1 FAX_RXD1 DG 4 4 CN1 DX10G1M-26SE 1 14 2 15 3 16 4 17 5 18 6 19 7 20 8 21 9 22 10 23 11 24 12 25 13 26 N.M 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 AUDATA3 AUDATA2 AUDATA1 2 DG (1) (1) +3.3V(F) PINT3 NMI 2 +3.3V(F) AUDATA0 N.M TRJ-TWE +3.3V(F) 2 N.M 2 TRJ-TWE N.M 2 GND DG 1 NMI PINT3 TRJ-TWE N.M TPW1 1 1 TPW2 DG 3 N.M TPW9 DX20M-36S N.M CN2 3 +3.3V(F) 4.7kJ R4 6 N.M 4.7kJ R151 IC11 6.8kJ D 7 0.01uF 4.7kJ R50 3.3kJ N.M R49 N.M 8 0.01uF N.M C20 0.01uF N.M C19 AR-FX12 ELECTRICAL SECTION 8-15 C18 +3.3V(F) N.M (1) (1) (1) AUDATA1 AUDATA2 AUDATA3 (1) CPU_TDO (1) AUDCK 1 (1) ( 1,7 ) ASEMD0RESET- ASEBRKRK- ( 1 ) (1) (1) CPU_TDI (1) CPU_TMS TRST- (1) CPU_TCK AUDSYNC- ( 1 ) (1) AUDATA0 1 MDMC PWB (8/8) R48 4.7kJ 4.7kJ 4.7kJ 4.7kJ 4.7kJ 4.7kJ 4.7kJ N.M N.M N.M N.M N.M N.M N.M R51 R52 R53 R54 R55 R56 R57 4.7kJ 4.7kJ 4.7kJ 4.7kJ N.M N.M N.M N.M R58 R59 R60 R61 A B C D [08]ELECTRICALSECTION.fm 15 ページ 2004年10月26日 火曜日 午後3時46分 A B C MJ2-1 MJ2-6 CN2-16 MJ2-4 MJ2-3 CN2-12 CN2-15 MJ2-5 ARG ARG CP62 TEL2 8 BT1 BT2 S CP74 CP72 CP67 ARG ARG 7 C10 N.M 1000p/AC250V 12V 12V R20 HZS2C1 R11 HZS2C1 10 1/4W 91 1/4W EXHS 11 7 16 9 11 8 6 RY1 12 1 2 D1 N.M 1SS133 RY2 1 2 IC2 C37 N.M 3 0.1u 7 DG CP9 5V D11 JP JP1 6 C DG DG 1 4 REC1 S1ZB60 12VS Q23 DTC143ZKA 51k 1/4W R16 CP51 CP38 15k 1W CI D4 2 5 AG 0.1u C34 4 CP31 CP25 R28 R21 3k 1/4W 220k 1/4W CP21 100k 1/4W CP17 R35 30k 1/4W CP13 CP6 Q4 2SA1807_P R24 4 B + C1 N.M 0.33u/50V DG C CP37 8 AG N.M 0.1u C47 12VS 4 7 6 5 4 3 2 1 IC6 NJM4558 8 CP77 C28 + N.M 0.1u AG C29 N.M 2.2u/50V 4 12VS IC3 +Vcc Bias 1300Hz_IN NC GND NC DET OUT N.M H8D3063 CP84 R52 N.M 1k 3 2 3 2 3 IC6A N.M NJM4558 1 R65 N.M 100k R66 N.M 1k 27k CP85 D15 N.M RB751V40 RB751V40 D16 N.M CP82 2 T3 17 9 CP8 2 5 6 C40 CP81 N.M 100p(CH) R56 N.M 1.2k 2 IC6B N.M NJM4558 D12 N.M 1SS133 7 R55 N.M 3.9k VREF12VS (3) R54 N.M 10k CP80 DG R58 22k CP65 IC7A BU4066B 2 1 C51 N.M 0.033u(B) Q20 DTC143ZKA B C CP195 4 7 13 16 TRTEP17-0411E CP7 CP194 R68 C39 10u/16V N.P CP79 R78 C53 N.M N.M 1000p(B) 0 VREF12VS (3) R53 N.M 10k CP78 VREF12VS ( 2,3 ) R41 10k 1 IC4A NJM4558 R43 360k CP44 R51 10 1/4W CP20 C36 1000p(B) CP70 CP43 DG Q16 4.7u/50V C46 + Q11 ZD6 2SD1266A_O MTZJ33 BT-77 CP32 DTC143ZKA CP33 C B DTC143ZKA Q2 CP15 Q12 2SD592A_S CP19 C33 4.7u/50V + 3 ZD7 MTZJ8.2BT-77 CP46 12VS ZD4 NF1 MTZJ4.7BT-77 C26 N.M CP48 R30 CP42 MMZ1608S121AT 0.022u 1k Q13 2SC2412K-S CP54 CP55 R42 22k R31 10k CP58 R26 C27 C38 N.M N.M 0 10u/16V N.P 10u/16V N.P R40 CP64 2.7k ZD5 MTZJ4.7 AG BT-77 VREF12VS (3) DG DG Q10 DTC143ZKA C B DG R1 10k /CML Q3 2SC3415P R29 PC3 R25 18k 1/4W PC817X4 120k 1/4W CP16 ZD1 HZS2C1 CP35 IC4 NJM4558 2 3 N.M 2105 1 T2 5 6 3 Z0140PE 4 T1 1 R5 2k 1/4W 10E_4 /10DDA40 1 PC817X4 PC1 4 3 R46 1k VA2 TNR5V101K D8 N.M CRG02 D10 N.M CRG02 CP47 R12 0 CP5 5V 5 D7 CRG02 D9 CRG02 N.M N.M CP34 R13 CP26 CIP1 ( 3 ) B N.M 0.047u/400V C15 Q1 N.M CP75 DTC143ZKA C B CP66 JP JP2 AG CP50 1u/250V C14 CP30 RY3 RSB-12-U 1SS133 12 C21 1000p/500V OUAZ-SH-112LZ CP73 CP59 1SS133 RSB-12-U D17 1 13 RY4 N.M OUAZ-SH-112LZ CP63 CP53 DG 4 Q18 CP28 DTC143ZKA B C CP41 DG 2 3 PC814X1 C16 47u/16V N.P PC2 C17 1000p(B) ZD2 CP49 ZD3 L7 N.M ST-202S L6 SBT0260 C4 N.M 1000p/AC250V 4 CP40 1 30 1/4W R8 CP36 D13 1SS133 CP14 7 12V 11 6 5 HS1/HS2 1 IC2 N.M THS_56F 2 CP29 C32 JP L11 CP24 N.M 12V EL0607RA-331J-PF VA1 TNR5V471K L9 SBT0260 CP23 L12 ST110AV R23 4.7 1/2W L13 N.M EL0607RA-331J-PF CP12 CP11 L10 SBT0260 SA1 DSS-401M CP39 ARG R3 N.M 0 CP52 L8 SBT0260 TEL1 /EXHS MR CP27 LT2 SA2 N.M DSS-401M MJ1-2 CP22 SA3 N.M DSS-401M MJ1-1 CP10 R4 N.M 0 1 2 CP3 LT1 4 3 MJ2-2 9 D 1 16 CP1 13 11 3 2 CN2-9 8 1 2 /HS2 4 6 4 3 CP4 E E CP2 /HS1 3 4 E CN2-10 2 1 E 6 E E E 7 + 8 C52 R64 N.M 0 CP83 CP76 12V AG /CI /DP DG VREF12VS (3) 1 1 CN2-26 CN2-17 MON ( 2 ) CN2-13 CN2-18 IN/OUT( 2 ) PC4 N.M PC817X4 /FNETD CML R62 0 CP197 ZD8 MTZJ4.7BT-77 CP18 ZD9 MTZJ4.7BT-77 4.7u/50V 1 + + AR-FX12 ELECTRICAL SECTION 8-16 4 13 + 2 TEL/LIU PWB(USA) (1/3) 3 A B C D [08]ELECTRICALSECTION.fm 16 ページ 2004年10月26日 火曜日 午後3時46分 CN1-3 CN1-2 CN2-19 CN2-23 CN2-22 CN2-21 CN2-20 CN1-4 CN1-1 CP113 CP100 CP94 RX- RX+ 8 CP146 /RCVMUTE CP132 /VRSEL3 CP127 /VRSEL2 CP123 /VRSEL1 CP119 /MICMUTE TX- TX+ AG CP95 C N.M DTC143ZKA C N.M DTC143ZKA C R45 N.M 22k R33 N.M 22k R34 N.M 22k N.M DTC143ZKA C R38 N.M 22k C B 12V L2 N.M SBT0260 D2 N.M 1SS133 AG 7 IC5 BU4066B AG 0.1u N.M 0.1u 7 C48 14 D3 N.M 1SS133 C35 AG C6 DG CP148 L3 N.M CP147 N.M SBT0260 4.7u/50V DG + C23 N.M 220p(CH) C 11 IC7 BU4066B 7 14 N.M DTC143ZKA R44 N.M 22k 12V AG N.M 0.1u C5 6 IC1 NJM4558 4 8 AG B E C AG 4 0.1u C49 IC9 NJM4558 AG 8 R37 N.M 2.2k R19 N.M 3.3k 5 4 1 R50 CP126 N.M 11k IC5C N.M BU4066B 4 CP191 CP192 R49 N.M 68k IC5B N.M BU4066B R47 CP140 N.M 36k 8 VREF12V ( 1,3 ) 9 N.M 24k R67 IC5A N.M BU4066B R48 CP131 N.M 20k 4 IC7C CP190 BU4066B 8 R14 N.M 8.2k CP145 9 3 2 CP116 11 7 22k 1% R59 C41 470p(B) R69 18k IC8B NJM4558 5 6 CP93 ( 3 ) VREF12V CP121 CP104 12V R72 15k 5.1k 1% R73 IC7D BU4066B CP193 10 CP91 R74 11k 1% 4 ( 3 ) VREF12V CP98 IC7B BU4066B 4 CP137 3 IC8 NJM4558 8 5 AG C11 N.M 2.2u/50V IC1B N.M NJM4558 6 + 12V C20 N.M 1000p(B) R57 22k R18 N.M 39k 7 CP136 N.M DTC143ZKA CP144 DG Q19 AG 0.1u C50 R36 N.M 150 12V Q5 N.M 2SC2412K-S IC5D N.M CP149 BU4066B 10 CP133 CP128 CP124 CP120 CP114 1 CP90 3 IC1A N.M CP101 NJM4558 2 R22 N.M 68k C19 N.M 1000p(B) C22 N.M 1000p(B) CP89 C18 N.M AG 2.2u/50V R17 N.M 1k C13 N.M 1000p(B) R15 CP96N.M 1k N.M DTC143ZKA R39 N.M 22k C7 C12 N.M N.M 2200p(B) 1u VREF12V ( 1,3 ) AG Q14 Q15 N.M DTC143ZKA CP139 B Q6 B Q7 B Q8 B Q9 B C2 N.M 2200p(B) L4 N.M SBT0260 + C3 N.M 4.7u/50V CP87 + A B C D R9 N.M 1k R10 N.M 330 E E E E E ( 1,3 ) VREF12V E 5 5 6 12 7 + - 12 13 5 6 + - + 8 3 R83 51k 1% 3 R75 11k CP156 CP155 ( 1 ) MON R81 22k 1% IC8A NJM4558 1 C57 100p(CH) 2 CP122 3 R70 22k 1% C58 0.068u(B) CP112 3 2 IC9A NJM4558 1 2 220p(CH) 27k C54 R76 CP118 TP9 N.M SIGRX VREF12V (3) R86 N.M 10k R84 N.M 10k SIGRX 620 1% R80 C55 N.M CP92 0.068u SIGTX CP88 R87 C59 N.M N.M 10k 0.068u N.M R79 3.3k TP8 SIGTX ZD11 CP153 ZD10 N.M N.M CP154 HZS2C1 HZS2C1 CP125 R71 22k AG R85 620 CP117 2 C56 0.068u(B) AG + C61 4.7u/50V R82 470 1% CP99 + + AR-FX12 ELECTRICAL SECTION 8-17 6 CN2-4 1 IN/OUT CN2-6 1 (1) A B C D [08]ELECTRICALSECTION.fm 17 ページ 2004年10月26日 火曜日 午後3時46分 TEL/LIU PWB(USA) (2/3) A B C D CN2-25 CN1-6 CN2-11 CN1-5 CN2-1 CN2-30 CN2-27 CN2-2 CN2-3 CN2-7 CN2-8 CN2-29 CN2-28 CN3-3 CN2-14 CN2-24 CN3-2 CN3-1 8 CP183 CP181 CP178 CP176 CP184 _DG /RHS JP3 N.M JP D14 DG DG C9 N.M 1000p(B) 7 5V 5V DG D5 N.M 1SS133 D6 R7 N.M N.M 1SS133 4.7k DG + C24 47u/25V AG + C45 47u/25V 12V 12VS N.M 1SS133 6 7 Q22 CP165 N.M DTC143ZKA C B CP162 RY5 N.M G6E-134P-US TP3 N.M SBT0260 L1 N.M R2 N.M 0 C8 N.M 1000p(B) SBT0260 L5 N.M CP182 RHS DG TP6 N.M C25 0.1u 5V TP1 N.M C44 0.1u 12V R6 N.M CP180 0 DG 12VS CP173 TP5 N.M DG /CIOUT CP179 /HRS 5V 12V 12VS 1 Q21 N.M DTC143ZKA B C 12V 10 12 CP161 CP170 CP169 CP166 AG CION EC CIP R77 CP164 N.M 4.7k 1W E B DG C Q17 N.M DTC143ZKA DG E 7 6 CIP1 ( 1 ) 6 DG AG 5 6 1u/50V 7 7 5 AG IC4B NJM4558 DG TP7 N.M VREF12VS R88 N.M 0 C60 N.M 0.1u 4.7u/50V + C31 CP175 4.7u/50V + C43 TP4 N.M VREF12V TELID CP163 CP171 DG IC9B NJM4558 NF2 N.M MMZ1608S121AT TP10 AG TP2 DG 1u/50V + C30 CP177 DG AG R27 10k R32 10k 5 6 + C42 CP172 12VS AG R60 10k R61 10k 12V 5 TELID SELECT R63 RESISTANCE 620 + 8 + AR-FX12 ELECTRICAL SECTION 8-18 E FG CP45 CN2-5 4 VREF12VS ( 1 ) VREF12V ( 1,2 ) 4 MJ-66J-RD315 BT2 6 RX+ TX- /HS2 3 12VS 30 29 DG DG /FNETD 28 27 EC /VRSEL2 24 22 5V 23 /VRSEL3 /MICMUTE 20 /DP S CION /EXHS SIGTX 26 21 /VRSEL1 L2 2 25 19 /RCVMUTE 18 16 14 12 L1 1 MJ-62J-RD315 /CIOUT 3 MJ1 AG NC 15 17 CML 13 MR /CI 11 10 9 /HS1 RHS 12V 8 7 12V 6 S03B-XASK-1 CIP 2 1 CN3 Japan Only SIGRX 5 AG TELID 4 1 3 2 30FE-BT-VK-N AG DG /RHS DG CN2 6 5 4 RX- 2 3 TX+ MD-S610-90 1 CN1 Japan Only LT2 5 TEL2 TEL1 3 4 LT1 BT1 2 1 MJ2 3 7.5k 4.7k 3.3k 2.2k 1.5k 1.0k 620 270 ID SELECT RESISTANCE 2 1 2.43V 2.10V 1.82V 1.48V 1.18V 0.89V 0.62V 0.30V 1 2.36-2.49V 2.02-2.17V 1.73-1.90V 1.40-1.56V 1.10-1.26V 0.83-0.96V 0.57-0.67V 0.27-0.33V ID SELECT ID SELECT VOLTAGE VOLTAGE (TYP) (MIN-MAX) PULL UP RESISTANCE 2.7k (3.3V) 8 7 6 5 4 3 2 1 TELID MODE TELID SELECT RESISTANCE 2 A B C D [08]ELECTRICALSECTION.fm 18 ページ 2004年10月26日 火曜日 午後3時46分 TEL/LIU PWB(USA) (3/3) [08]ELECTRICALSECTION.fm 19 ページ 2004年10月26日 火曜日 午後3時46分 4.Part Layout A. FAX I/F PWB_U AR-FX12 ELECTRICAL SECTION 8-19 [08]ELECTRICALSECTION.fm 20 ページ 2004年10月26日 火曜日 午後3時46分 B.MDMC PWB_U AR-FX12 ELECTRICAL SECTION 8-20 [08]ELECTRICALSECTION.fm 21 ページ 2004年10月26日 火曜日 午後3時46分 AR-FX12 ELECTRICAL SECTION 8-21 [08]ELECTRICALSECTION.fm 22 ページ 2004年10月26日 火曜日 午後3時46分 C.TEL/LIU PWB_U AR-FX12 ELECTRICAL SECTION 8-22 q PARTS GUIDE CODE :00ZARFX12/P1/ レーザープリンタ オプション FAX拡張キット 拡張キット DIGITAL LASER COPIRER/ PRINTER OPTION FAX EXPANSION KIT MODEL AR-FX12 CONTENTS 1 FAX BOX ユニット (FAX BOX UNIT) 2 梱包及び付属品 (Packing material&Accessories) 3 TEL/LIU 基板 (TEL/LIU PWB U)…JAPAN 4 TEL/LIU 基板 (TEL/LIU PWB U)…USA,CANADA 5 TEL/LIU 基板 (TEL/LIU PWB U)…EUROPE 6 TEL/LIU 基板 (TEL/LIU PWB U)…Australia,New Zealand 7 モデムコントロール基板 (Modem control PWB U) 8 FAX インターフェース基板 U(FAX interface PWB U) 9 FAX AC 電源基板 (FAX AC power supply unit)…100V series F FAX AC 電源基板 (FAX AC power supply unit)…200V series ■ 索引 (index) Parts marked with "!" are important for maintaining the safety of the set. Be sure to replace these parts with specified ones for maintaining the safety and performance of the set. 本書はサービス活動用に作成した資料です。 一部内容が製品の改良・改善等により予告 なしに変わることがあります。 SHARP CORPORATION This document has been published to be used for after sales service only. The contents are subject to change without notice. 補修部品のランク付 市場における補修部品の在庫管理が、適正に運営出来る手助けとなることを、目的とします。 Aランク : メンテナンスパーツ、メンテナンスパーツには入っていないがメンテナンスパーツに近い消耗パーツ。 Bランク : 性能・機能パーツ(センサー、クラッチ等の電気パーツ) 、消耗パーツ。 Eランク : 基板含むユニットパーツ。 Dランク : 整備パーツ(外装、パッキング、同梱パーツ)。 Cランク : 上記ランク以外のパーツ(基板の子部品を除いたもの) 。 DEFINITION Rank Rank Rank Rank Rank A B E D C : : : : : Maintenance parts, and consumable parts which are not included in but closely related to maintenance parts Performance/function parts (sensors, clutches, and other electrical parts), consumable parts Unit parts including PWB Preparation parts (External fitting, packing, parts packed together) Parts other than the above (excluding sub components of PWB) 安全性・信頼性確保のため部品は、必ず正規のものをご使用下さい。 !印の商品は、安全上重要な部品です。交換をする時は、安全及び性能維持のため必ず指定の部品をご使用下さい。 Because parts marked with "!" is indispensable for the machine safety maintenance and operation, it must be replaced with the parts specific to the product specification. F F F F 当モデルのサービス資料には、この資料以外にサービスマニュアル ( 回路図含む ) があります。合わせてご利用下さい。 Other than this Parts Guide, please refer to documents Service Manual(including Circuit Diagram)of this model. Please use the 13 digit code described in the right hand corner of front cover of the document, when you place an order. For U.S. only-Use order codes provided in advertising literature. Do not order from parts department. [NOTE] ∗ 左記のマークがあるパーツは SMF 手配のパーツです。 ∗ These parts are supplied by SMF 1 FAX BOX ユニット (FAX BOX UNIT) NO. 1 2 3 4 5 6 7 8 ! ! 11 12 13 14 15 16 18 19 20 22 23 24 25 26 27 28 30 31 32 33 34 35 36 37 38 39 PARTS CODE PCOVP1564FCZZ GCAB-0947FCZZ LHLDZ1494FCZZ LFIX-0567FCZZ DHAI-3297FCZZ DHAI-3298FCZZ DHAI-3418FCZZ LHLDZ1493FCZZ XEBS730P12000 XEBS730P10000 RDENC0004FCZ1 RDENC0031FCZZ LBSHZ1001ACZZ XHBS730P06000 LPLTM5788FCZZ QSW-C9295QCZZ LBSHZ2050SCZZ LSUPP0118FCZZ LHLDW1499FCZZ LSUPP0076FCZZ LPLTM5892FCZZ LFIX-0560FCZZ PSHEZ4933FCZZ DHAI-3207FC11 DHAI-3204FC11 DHAI-3444FCZZ GCAB-0946FCZ2 GCAB-0946FCZ3 LPLTM5893FCZZ LPLTM5789FCZZ DUNT-7136FCA1 XHBS740P06000 PSHEZ4879FCZZ CPWBN1619FCE1 CPWBN1619FCE2 CPWBN1620FCE1 LPLTM5787FCZZ CPWBX1618FCE1 QCNW-0210FCZZ VHI28F082L27F VHI28F082L28F VHI28F082L31F VHI28F082L32F DHAI-3206FC11 PRICE RANK Ex. Ja. AF DS AT EZ AF DS AD DJ AP EQ AP EQ AR EQ AF DS AC DD AC DD BZ TR CA TV AB DD AC DD AP EQ AL EB AB DD AB DJ AC DJ AA DD AD DJ AF DS AD DJ AG DX AM EG AN EQ AZ FQ AZ FQ AQ EQ AF DS AN EQ AA DD AH DX BQ LP BM HV BQ LP AQ EQ CC TZ AE DJ BA FX BA FX BA FX AY FQ AG DX NEW MARK N N N N N N N N N N N N PART RANK C D C C C C C C C C E E C C C B C C C C C C C C C C D D C C E C C E E E C E C B B B B C DESCRIPTION FAX ROM cover FAX rear cabinet FAX AC cord holder B FAX holder cord fixing plate FAX power supply harness FAX power supply harness FAX power supply harness FAX AC cord holder C Screw(3×12) Screw(3×10) FAX AC power supply unit FAX AC power supply unit Bushing Screw(3×6) FAX AC power supply fixing plate Switch Edge bushing(EDS-1208U) PWB supporter(SPLSN6) Wire saddle(WS-2U) PWB supporter(SPS-6) FAX separate plate FAX AC cord fixing plate FAX MD cover sheet FAX Switch harness N FAX BOX harness N FAX BOX harness B FAX front cabinet FAX front cabinet FAX fixing plate N Speaker fixing plate FAX speaker unit Screw(4×6) FAX front sheet TEL/LIU PWB unit TEL/LIU PWB unit TEL/LIU PWB unit FAX PWB fixing plate Modem control PWB unit FAX I/F FFC FAX flash ROM FAX flash ROM FAX flash ROM FAX flash ROM CIP IF harness –1– [Japan] [100V series] [200V series] [100V series] [200V series] [Japan] [Japan] [except Japan] [Japan] [except Japan] [Japan] [USA,CANADA] [EUROPE] [Japan] [USA,CANADA] [EUROPE] [Australia,New Zealand] [Japan] FAX ROM カバー FAX 後キャビネット FAX AC コードホルダー B FAX ホルダーコード押え板 FAX 電源ハーネス FAX 電源ハーネス FAX 電源ハーネス FAX AC コードホルダー C ビス ビス FAX AC 電源ユニット FAX AC 電源ユニット ブッシング ビス FAX AC 電源取付け板 スイッチ エッジサドル 基板サポーター ワイヤーサドル 基板サポーター FAX 仕切り板 FAX AC コード押え板 FAX MD カバーシート FAX スイッチ ハーネス N FAX BOX ハーネス N FAX BOX ハーネス B FAX 前キャビネット FAX 前キャビネット FAX 取付け板 N スピーカー取付け板 FAX スピーカー UN ビス FAX 前シート TEL/LIU 基板 TEL/LIU 基板 TEL/LIU 基板 FAX 基板取付け板 モデムコントロール基板 FAX 中継 FFC FAX フラッシュ ROM FAX フラッシュ ROM FAX フラッシュ ROM FAX フラッシュ ROM CIP 中継ハーネス N 1 FAX BOX ユニット (FAX BOX UNIT) NO. PRICE RANK Ex. Ja. AA DD AC DD AB DD AA DD BR LX BR LX CB TX PARTS CODE LHLDW2087SCZZ LX-BZ0938FCZZ LX-WZ0443FCZZ XBPS726P08000 CPLTM5788FCE9 501 CPLTM5788FCF0 CPLTM5788FCF2 41 43 45 46 NEW MARK PART RANK C C C C E E E N N N N DESCRIPTION [Japan] ミニクランプ FAX ホルダービス アース用平ワッシャ ビス [Japan] FAX 電源ユニット [100V series] FAX 電源ユニット [200V series] FAX 電源ユニット Wire holder FAX holder screw Washer Screw(2.6×8) FAX power supply unit FAX power supply unit FAX power supply unit 1 FAX BOX ユニット (FAX BOX UNIT) 43 13 1 B C 38 37 2 3 4 A 30 A 43 5 31 6 36 13 8 13 13 41 7 13 13 24 13 25 46 D 35 Japan only 46 46 45 C 33 11 F 27 13 23 39 13 28 34 45 B 13 18 16 15 13 19 13 13 20 14 D 32 FCP08033 33 501 32 –2– F 26 22 12 2 梱包及び付属品 (Packing material & Accessories) NO. ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ PARTS CODE 1 SPAKA6150FCZZ 2 SSAKA3640QCZZ 3 SPAKA6151FCZZ TCADZ1696FCZZ 4 TCADZ1697FCZZ TINSJ2785FCZZ TINSE2786FCZZ TINSE2791FCZZ 5 TINSE2787GHZZ TINSG2788GHZZ TINSF2789GHZZ TINSW2790GHZZ 7 CPWBX1640FCE1 8 SPAK-546ECCZZ 9 QCNW-0178FCZZ DHAI-3027FCAZ DHAI-3446FCAZ 10 QCNW-7254HSZZ QCNW-7252HSZZ QCNW-7253HSZZ 11 SSAKA0006UCZZ 12 SPAKA5824FCZZ 13 XBPS726P08000 14 XBBS740P06000 15 LX-BZ0140FCZZ 16 SPAK-546ECCZZ 17 RCORF0046FCZZ 18 SSAKA3001CCZZ RADPA0001QSZZ 19 RADPA0002TSZZ PRICE RANK Ex. Ja. AP EQ AB DD AK EB AH DX AK EB BD GJ BD GN BE GN BL AB BA BF BA HL DD FX GN FX AA AF AA AA AB AB AH AA AQ DD DS DD DD DD DD DX DD EQ NEW MARK N N N N N N N N N N N N PART RANK D D D D D D D D D D D D E D C C C C C C D D C C C D C D B B DESCRIPTION FAX kit add Vinyl bag(320×690mm) FAX kit spacer FAX inst.manual FAX inst.manual FAX OP manual FAX OP manual FAX OP manual FAX OP manual FAX OP manual FAX OP manual FAX OP manual FAX interface PWB unit Vinyl bag(125×230mm) FAX interface cable Line cable Line cable Line cable Line cable Line cable Vinyl bag(50×60mm) ARMM protect sheet Screw(2.6×8) Screw(4×6) Screw Vinyl bag(125×230mm) Core Vinyl bag(140×360mm) Line cable adapter Line cable adapter [Japan] [except Japan] [Japan] [USA,CANADA] [Australia,New Zealand] [U.Kingdom] [Germany] [France] [Sweden] [Japan,USA,CANADA] [Australia,New Zealand] [U.Kingdom] [SEEG] [SEF] [EUROPE] [EUROPE] [Australia,New Zealand] [EUROPE] FAX キットアド ポリ袋 FAX キットスペーサー FAX 設置手順書 FAX 設置手順書 FAX 取扱説明書 FAX 取扱説明書 FAX 取扱説明書 FAX 取扱説明書 FAX 取扱説明書 FAX 取扱説明書 FAX 取扱説明書 FAX インターフェース基板 U ポリ袋 FAX インターフェースケーブル ラインケーブル UN ラインケーブル SCA ラインケーブル SUK ラインケーブル SEEG ラインケーブル SEF ポリ袋 ARMM ホゴシート ビス ビス ビス ポリ袋 コア ポリ袋 ラインケーブルアダプター ラインケーブルアダプター 2 梱包及び付属品 (Packing material & Accessories) 10 17 18 19 1 4 16 5 12 2 7 9 3 8 11 10 1 15 14 13 FCP08034 –3– 3 TEL/LIU 基板 (TEL/LIU PWB U)…JAPAN NO. 1 2 3 4 5 6 ! ! PARTS CODE QCNCM1156FCZZ QCNCW1155FCZZ QJAKT0001FCZZ QJAKT0002FCZZ QSOCD0081FCZZ RCILZ0089FCZZ PRICE RANK Ex. Ja. AD DJ AE DJ AD DJ AE DJ AL EB AG DX NEW MARK PART RANK C C C C C C 7 RC-KZ0008QCZZ AB DD C RFILN0047FCZZ RFILN2011SCZZ RRLYD1211QCZZ RRLYD3211QCZZ RR-WZ0418FCZZ RTRNP0534FCZZ RTRNP2105SCZZ VCCCCZ1EH221J VCCCCZ1HH101J RC-EZ0362FCPZ RC-EZ0363FCPZ RC-EZ0365FCPZ RC-EZ0366FCPZ AC AC AH AM AF AT AP AB AA AC AC AB AB DJ DJ DX EG DS EZ EQ DD DD DD DD DD DD N N N N C C B B B B B C C C C C C 23 RC-EZ0369FCPZ AB DD N C VCFYDA1HA105J VCFYJU2AA824K VCFYJU2EA105K VCFYJU2GA473K VCKYCZ1AB333K VCKYCZ1HB102K VCKYCZ1HB222K VCKYCZ1HB471K VCQYNA1HM223K VHD10DDA40+-1 VHD1SS133//-1 VHDRB751V40-1 VHDS1ZB60//-1 VHEHZS2C1//-1 VHEMTZJ33B+-1 VHEMTZJ39B/-1 VHEMTZJ4R7B-1 VHEMTZJ8.2B-1 VHIBU4066BCF1 VHINJM4558MF1 VHITHS56F//-1 VHPPC814X1+-1 VHVDSS-401M// VHVTNR5V101K/ VHVTNR5V471K/ VRD-HT2EY100J VRD-HT2EY104J VRD-HT2EY124J VRD-HT2EY183J VRD-HT2EY224J VRD-HT2EY300J VRD-HT2EY303J VRD-HT2EY472J VRD-HT2EY910J VRS-CZ1JD000J VRS-CZ1JD102J AE AF AE AC AB AA AA AA AA AB AA AD AC AB AC AC AC AB AD AE AS AD AH AD AD AA AA AA AA AA AA AA AA AA AA AA DJ DS DS DD DD DD DD DD DD DJ DD DJ DJ DJ DJ DJ DJ DJ DJ DJ EZ DJ DX DJ DJ DD DD DD DD DD DD DD DD DD DD DD C C C C C C C C C B B B B B B B B B B B B B B B B C C C C C C C C C C C 62 VRS-CZ1JD103J AA DD C VRS-CZ1JD104J VRS-CZ1JD113F VRS-CZ1JD113J VRS-CZ1JD122J VRS-CZ1JD151J VRS-CZ1JD153J VRS-CZ1JD183J VRS-CZ1JD203J VRS-CZ1JD222J VRS-CZ1JD223F AA AA AA AA AA AA AA AA AA AA DD DD DD DD DD DD DD DD DD DD C C C C C C C C C C 73 VRS-CZ1JD223J AA DD C VRS-CZ1JD243J VRS-CZ1JD271J VRS-CZ1JD272J VRS-CZ1JD273J VRS-CZ1JD331J AA AA AA AA AA DD DD DD DD DD C C C C C 8 9 10 11 13 14 15 16 17 18 19 20 21 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 48 49 50 51 52 53 54 55 56 57 58 59 60 61 63 64 65 66 67 68 69 70 71 72 74 75 76 77 78 DESCRIPTION Connector(S03B-XASK-1) [CN3] Connector(30FE-BT-VK-N) [CN2] Modular Jack(MJ62J-RD315) [MJ1] Modular Jack(MJ66J-RD315) [MJ2] Socket(MD-S6350-90) [CN1] Coil(ST110AV) [L12] Capacitor(50WV 0.1µF) [C5,C25,C34,C35,C37,C44,C47,C48,C49,C50] Filter(MMZ1608S121) [NF1] Filter(SBT-0260) [L1,L2,L3,L4,L5,L6,L8,L9,L10] Relay(0UAZ-SH-112LZ) [RY1,RY2] Relay(G6E-134P-US) [RY5] Relay(HPC1/2W) [R23] Transformer(CIT1414EP) [T3] Power transformer(2105) [T2] Capacitor(25WV 220pF) [C23,C36,C54] Capacitor(50WV 100pF) [C57,C40] Capacitor(16WV 10µF N.P 105 ℃ (LF)) [C38,C39] Capacitor(16WV 47µF N.P 105 ℃ (LF)) [C16] Capacitor(25WV 47µF 105 ℃ (LF)) [C45,C24] Capacitor(50WV 1µF 105 ℃ (LF)) [C30,C42,C46] Capacitor(50WV 4.7µF 105 ℃ (LF)) [C3,C6,C31,C43,C52,C61] Capacitor(50WV 1µF) [C12] Capacitor(100WV 0.82µF) [C32] Capacitor(250WV 1µF) [C14] Capacitor(400WV 0.047µF) [C15] Capacitor(10WV 0.033µF) [C58,C51] Capacitor(50WV 1000pF) [C8,C9,C13,C17,C19,C20,C22,C53] Capacitor(50WV 2200pF) [C2] Capacitor(50WV 470pF) [C41] Capacitor(50WV 0.022µF) [C26] Diode(10DDA40) [D4] Diode(1SS133) [D1,D2,D3,D5,D6,D11,D12,D13,D14,D17] Diode(RB751V-40) [D16,D15] Diode(S1ZB60) [REC1] Zener diode(HZS2C1) [ZD2,ZD3] Zener diode(MTZJ33BT-77) [ZD6] Zener diode(MTZJ39B) [ZD1] Zener diode(MTZJ4R7B) [ZD4,ZD5,ZD8,ZD9] Zener diode(MTZJ8.2B) [ZD7] IC(BU4066BCF1) [IC5,IC7] IC(NJM4558MF1) [IC1,IC4,IC6,IC8,IC9] IC(THS56F) [IC2] Photo coupler(PC814X1) [PC2] Arrestor(DSS-401M) [SA1] Varistor(TNR5V101K) [VA2] Varistor(TNR5V471K) [VA1] Resistor(1/4W 10Ω ±5%) [R51,R20] Resistor(1/4W 100KΩ ±5%) [R24] Resistor(1/4W 120KΩ ±5%) [R25] Resistor(1/4W 18KΩ ±5%) [R29] Resistor(1/4W 220KΩ ±5%) [R21] Resistor(1/4W 30Ω ±5%) [R8] Resistor(1/4W 30KΩ ±5%) [R35] Resistor(1/4W 4.7KΩ ±5%) [R28] Resistor(1/4W 91Ω ±5%) [R11] Resistor(1/16W 0Ω ±5%) [R3,R4,R62] Resistor(1/16W 1.0KΩ ±5%) [R9,R15,R17,R30,R46,R52,R66] Resistor(1/16W 10KΩ ±5%) [R1,R27,R31,R32,R41,R53,R54,R60,R61] Resistor(1/16W 100KΩ ±5%) [R65] Resistor(1/16W 11KΩ ±1%) [R74] Resistor(1/16W 11KΩ ±5%) [R50,R75] Resistor(1/16W 1.2KΩ ±5%) [R56] Resistor(1/16W 150Ω ±5%) [R36] Resistor(1/16W 15KΩ ±5%) [R72] Resistor(1/16W 18KΩ ±5%) [R69] Resistor(1/16W 20KΩ ±5%) [R48,R43] Resistor(1/16W 2.2KΩ ±5%) [R37] Resistor(1/16W 22KΩ ±1%) [R59,R70,R81] Resistor(1/16W 22KΩ ±5%) [R33,R34,R38,R39,R44,R45,R57,R58,R71] Resistor(1/16W 24KΩ ±5%) [R67,R42] Resistor(1/16W 270Ω ±5%) [R63] Resistor(1/16W 2.7KΩ ±5%) [R40] Resistor(1/16W 27KΩ ±5%) [R68,R76] Resistor(1/16W 330Ω ±5%) [R10] –4– コネクター コネクター モジュラージャック モジュラージャック ソケット コイル コンデンサー フィルター フィルター リレー リレー リレー トランス トランス コンデンサー コンデンサー コンデンサー コンデンサー コンデンサー コンデンサー コンデンサー コンデンサー コンデンサー コンデンサー コンデンサー コンデンサー コンデンサー コンデンサー コンデンサー コンデンサー ダイオード ダイオード ダイオード ダイオード ツェナーダイオード ツェナーダイオード ツェナーダイオード ツェナーダイオード ツェナーダイオード IC IC IC フォトカプラー アレスター バリスタ バリスタ 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 3 TEL/LIU 基板 (TEL/LIU PWB U)…JAPAN NO. PARTS CODE PRICE RANK Ex. Ja. AA DD AA DD AA DD AA DD AA DD AA DD AA DD AA DD AA DD AA DD AB DD AB DD AE DS AB DD AP EQ AF DS AK DX NEW MARK PART RANK C C C C C C C C C C C C B B B B B DESCRIPTION VSDTC143ZKA-1 AC DJ B VSDTC143ZKA-1 (Unit) 901 CPWBN1619FCE1 AC DJ B Resistor(1/16W 3.3KΩ ±5%) [R19] Resistor(1/16W 36KΩ ±5%) [R47] Resistor(1/16W 3.9KΩ ±5%) [R55] Resistor(1/16W 39KΩ ±5%) [R18] Resistor(1/16W 4.7KΩ ±5%) [R7] Resistor(1/16W 5.1kΩ ±1%) [R73] Resistor(1/16W 620Ω ±1%) [R80,R82] Resistor(1/16W 68KΩ ±5%) [R49,R22] Resistor(1/16W 820Ω ±5%) [R85] Resistor(1/16W 8.2KΩ ±5%) [R14] Resistor(1W 2KΩ ±5%) [R13] Resistor(1W 4.7KΩ ±5%) [R77] Transistor(2SA1807-P) [Q4] Transistor(2SC2412KS) [Q5,Q13] Transistor(2SC3415-P) [Q3] Transistor(2SD1266A0) [Q11] Transistor(2SD592A-S) [Q12] Transistor(DTC143ZKA) [Q1,Q2,Q6,Q7,Q8,Q9,Q10,Q14,Q15,Q16,Q17,Q18,Q19,Q20] Transistor(DTC143ZKA) [Q21,Q22,Q23] BQ LP E TEL/LIU PWB unit 79 80 81 82 83 84 86 87 88 89 90 91 92 93 94 95 96 97 VRS-CZ1JD332J VRS-CZ1JD363J VRS-CZ1JD392J VRS-CZ1JD393J VRS-CZ1JD472J VRS-CZ1JD512F VRS-CZ1JD621F VRS-CZ1JD683J VRS-CZ1JD821J VRS-CZ1JD822J VRS-RA3AA202J VRS-RA3AA472J VS2SA1807-P-1 VS2SC2412KS-1 VS2SC3415-P-1 VS2SD1266A0-1 VS2SD592A-S-1 N N 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 トランジスター トランジスター トランジスター トランジスター トランジスター トランジスター トランジスター [Japan] TEL/LIU 基板 4 TEL/LIU 基板 (TEL/LIU PWB U)…USA,CANADA NO. ! ! 1 2 3 4 5 6 7 8 9 11 12 13 14 15 16 17 18 19 PARTS CODE QCNCW1155FCZZ QJAKT0001FCZZ QJAKT0002FCZZ RCILZ0089FCZZ RC-KZ0008QCZZ RC-KZ102BRC2H RFILN0047FCZZ RFILN2011SCZZ RRLYD1211QCZZ RR-WZ0418FCZZ RTRNZ0008QSZZ RTRNZ0009QSZZ VCCCCZ1EH221J VCCCCZ1HH101J RC-EZ0362FCPZ RC-EZ0363FCPZ RC-EZ0365FCPZ RC-EZ0366FCPZ PRICE RANK Ex. Ja. AE DJ AD DJ AE DJ AG DX AB DD AC DD AC DJ AC DJ AH DX AF DS AT EZ AQ EQ AB DD AA DD AC DD AC DD AB DD AB DD 20 RC-EZ0369FCPZ AB DD VCFYJU2EA105K VCKYCZ1AB683K VCKYCZ1HB102K VCKYCZ1HB471K VHD10DDA40+-1 VHD1SS133//-1 VHDS1ZB60//-1 VHEHZS2C1//-1 VHEMTZJ33B+-1 VHEMTZJ4R7B-1 VHEMTZJ8.2B-1 VHIBU4066BCF1 VHINJM4558MF1 VHPPC814X1+-1 VHVDSS-401M// VHVTNR5V101K/ VHVTNR5V471K/ VRD-HT2EY100J VRD-HT2EY104J VRD-HT2EY124J VRD-HT2EY183J VRD-HT2EY202J VRD-HT2EY224J VRD-HT2EY300J VRD-HT2EY302J VRD-HT2EY303J VRD-HT2EY513J VRD-HT2EY910J VRS-CZ1JD000J VRS-CZ1JD102J AE AB AA AA AB AA AC AB AC AC AB AD AE AD AH AD AD AA AA AA AA AA AA AA AA AA AA AA AA AA DS DD DD DD DJ DD DJ DJ DJ DJ DJ DJ DJ DJ DX DJ DJ DD DD DD DD DD DD DD DD DD DD DD DD DD 21 22 23 24 25 26 27 28 29 30 31 32 33 34 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 NEW MARK N N N N PART RANK C C C C C C C C B B B B C C C C C C N C C C C C B B B B B B B B B B B B B C C C C C C C C C C C C C DESCRIPTION Connector(30FE-BT-VK-N) [CN2] Modular Jack(MJ62J-RD315) [MJ1] Modular Jack(MJ66J-RD315) [MJ2] Coil(ST110AV) [L12] Capacitor(50WV 0.1µF) [C25,C34,C44,C48,C49,C50] Capacitor(500WV 1000pF) [C21] Filter(MMZ1608S121) [NF1] Filter(SBT-0260) [L6,L8,L9,L10] Relay(0UAZ-SH-112LZ) [RY2] Relay(HPC1/2W) [R23] Transformer(TRTEP17) [T3] Transformer(Z0140PE) [T1] Capacitor(25WV 220pF) [C54] Capacitor(50WV 100pF) [C57] Capacitor(16WV 10µF N.P 105 ℃ (LF)) [C38,C39] Capacitor(16WV 47µF N.P 105 ℃ (LF)) [C16] Capacitor(25WV 47µF 105 ℃ (LF)) [C45,C24] Capacitor(50WV 1µF 105 ℃ (LF)) [C42,C30] Capacitor(50WV 4.7µF 105 ℃ (LF)) [C31,C33,C43,C46,C52,C61] Capacitor(250WV 1µF) [C14] Capacitor(50WV 0.068µF) [C56,C58] Capacitor(50WV 1000pF) [C17,C36] Capacitor(50WV 470pF) [C41] Diode(10DDA40) [D4] Diode(1SS133) [D11,D13,D17] Diode(S1ZB60) [REC1] Zener diode(HZS2C1) [ZD1,ZD2,ZD3] Zener diode(MTZJ33BT-77) [ZD6] Zener diode(MTZJ4R7B) [ZD4,ZD5,ZD8,ZD9] Zener diode(MTZJ8.2B) [ZD7] IC(BU4066BCF1) [IC7] IC(NJM4558MF1) [IC4,IC8,IC9] Photo coupler(PC814X1) [PC2] Arrestor(DSS-401M) [SA1] Varistor(TNR5V101K) [VA2] Varistor(TNR5V471K) [VA1] Resistor(1/4W 10Ω ±5%) [R51,R20] Resistor(1/4W 100KΩ ±5%) [R24] Resistor(1/4W 120KΩ ±5%) [R25] Resistor(1/4W 18KΩ ±5%) [R29] Resistor(1/4W 2KΩ ±5%) [R5] Resistor(1/4W 220KΩ ±5%) [R21] Resistor(1/4W 30Ω ±5%) [R8] Resistor(1/4W 3.0KΩ ±5%) [R28] Resistor(1/4W 30KΩ ±5%) [R35] Resistor(1/4W 51KΩ ±5%) [R16] Resistor(1/4W 91Ω ±5%) [R11] Resistor(1/16W 0Ω ±5%) [R12,R62] Resistor(1/16W 1.0KΩ ±5%) [R30,R46] –5– コネクター モジュラージャック モジュラージャック コイル コンデンサー コンデンサー フィルター フィルター リレー リレー トランス トランス コンデンサー コンデンサー コンデンサー コンデンサー コンデンサー コンデンサー コンデンサー コンデンサー コンデンサー コンデンサー コンデンサー ダイオード ダイオード ダイオード ツェナーダイオード ツェナーダイオード ツェナーダイオード ツェナーダイオード IC IC フォトカプラー アレスター バリスタ バリスタ 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 4 TEL/LIU 基板 (TEL/LIU PWB U)…USA,CANADA NO. PARTS CODE VRS-CZ1JD103J VRS-CZ1JD113F VRS-CZ1JD113J VRS-CZ1JD153J VRS-CZ1JD183J VRS-CZ1JD223F VRS-CZ1JD223J VRS-CZ1JD272J VRS-CZ1JD273J VRS-CZ1JD332J VRS-CZ1JD364J VRS-CZ1JD512F VRS-CZ1JD621F VRS-CZ1JD621J VRS-RA3AA153J VS2SA1807-P-1 VS2SC2412KS-1 VS2SC3415-P-1 VS2SD1266A0-1 VS2SD592A-S-1 VSDTC143ZKA-1 (Unit) 901 CPWBN1619FCE2 52 53 54 55 56 57 58 59 60 61 62 64 66 67 68 69 70 71 72 73 74 PRICE RANK Ex. Ja. AA DD AA DD AA DD AA DD AA DD AA DD AA DD AA DD AA DD AA DD AA DD AA DD AA DD AA DD AB DD AE DS AB DD AP EQ AF DS AK DX AC DJ BM HV NEW MARK N N PART RANK C C C C C C C C C C C C C C C B B B B B B E DESCRIPTION Resistor(1/16W 10KΩ ±5%) Resistor(1/16W 11KΩ ±1%) Resistor(1/16W 11KΩ ±5%) Resistor(1/16W 15KΩ ±5%) Resistor(1/16W 18KΩ ±5%) Resistor(1/16W 22KΩ ±1%) Resistor(1/16W 22KΩ ±5%) Resistor(1/16W 2.7KΩ ±5%) Resistor(1/16W 27KΩ ±5%) Resistor(1/16W 3.3KΩ ±5%) Resistor(1/16W 360KΩ ±5%) Resistor(1/16W 5.1kΩ ±1%) Resistor(1/16W 620Ω ±1%) Resistor(1/16W 620Ω ±5%) Resistor(1W 15KΩ ±5%) Transistor(2SA1807-P) Transistor(2SC2412KS) Transistor(2SC3415-P) Transistor(2SD1266A0) Transistor(2SD592A-S) Transistor(DTC143ZKA) TEL/LIU PWB unit [R1,R27,R31,R32,R41,R60,R61] [R74] [R75] [R72] [R69] [R59,R70,R81] [R42,R57,R58,R71] [R40] [R68,R76] [R79] [R43] [R73] [R80] [R63,R85] [R13] [Q4] [Q13] [Q3] [Q11] [Q12] [Q2,Q10,Q16,Q18,Q20,Q23] 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 トランジスター トランジスター トランジスター トランジスター トランジスター トランジスター [USA,CANADA] TEL/LIU 基板 5 TEL/LIU 基板 (TEL/LIU PWB U)…EUROPE NO. ! ! 1 2 3 4 6 7 10 11 13 14 15 16 17 18 19 PARTS CODE QCNCW1155FCZZ QJAKT0001FCZZ QJAKT0004QSZZ RC-EZ0362FCPZ RC-EZ0365FCPZ RC-EZ0366FCPZ RC-EZ0369FCPZ RC-KZ0008QCZZ RCILZ0008QSZZ RCILZ0009QSZZ RCILZ0089FCZZ RFILN2011SCZZ RRLYZ2413QCZZ RTRNI2142SCZZ RTRNZ2140SCZZ PRICE RANK Ex. Ja. AE DJ AD DJ AE DJ AC DD AB DD AB DD AB DD AB DD AD DJ AF DS AG DX AC DJ AX FG AN EQ AN EQ NEW MARK N N N N PART RANK C C C C C C C C C C C C B B B VCCCCZ1EH221J AB DD C VCCCCZ1EH221J AB DD C VCFYDA1HA474J VCFYJU2EA105K VCFYJU2EA824K VCKYCZ1AB104K VCKYCZ1AB273K VCKYCZ1AB473K VCKYCZ1AB683K VCKYCZ1CF104Z VCKYCZ1HB182K VCKYCZ1HB331K VCKYCZ1HB332K VCKYCZ1HB821K VHDS1ZB60//-1 VHD1SS133//-1 VHD1SS355//-1 VHEHZS2C1//-1 VHEMTZJ30B/-1 VHEMTZJ39B/-1 VHEMTZJ4R7B-1 VHEMTZJ6R8B-1 VHIBU4066BCF1 VHINJM3414M-1 VHINJM4558MF1 VHITHS56F//-1 VHPTLP621-1GB VHPTLP627//-1 VHVDSS-401M// VHVDSS301L/-1 VHVTNR5V101K/ AD AE AE AC AB AB AB AB AA AA AA AC AC AA AB AB AB AC AC AC AD AF AE AS AF AH AH AF AD DJ DS DJ DD DD DD DD DD DD DD DD DD DJ DD DJ DJ DJ DJ DJ DJ DJ DX DJ EZ DX EB DX DS DJ C C C C C C C C C C C C B B B B B B B B B B B B B B B B B 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 DESCRIPTION Connector(30FE-BT-VK-N) [CN1] Modular Jack(MJ62J-RD315) [MJ2] Modular Jack(MJ66J-RD315) [MJ1] Capacitor(16WV 10µF N.P 105 ℃ (LF)) [C60] Capacitor(25WV 47µF 105 ℃ (LF)) [C38,C53] Capacitor(50WV 1µF 105 ℃ (LF)) [C21,C16] Capacitor(50WV 4.7µF 105 ℃ (LF)) [C7,C42,C58] Capacitor(50WV 0.1µF) [C8,C13,C36,C46,C54,C57,C5] Coil(1mH 250mA) [L8] Coil(47.mH 190mA) [L7,L9] Coil(ST110AV) [L5] Filter(SBT-0260) [L1,L3] Relay(TXD2-2M-12V) [RY2,RY1] Transformer(I2142) [T1] Transformer(Z2140) [T2] Capacitor(25WV 220pF) [C3,C4,C5,C10,C11,C12,C24,C25,C26,C28] Capacitor(25WV 220pF) [C29,C39,C40,C41,C43,C44,C51,C52,C55] Capacitor(50WV 0.47uF) [C18] Capacitor(250WV 1µF) [C49] Capacitor(250WV 0.82µF) [C47] Capacitor(10WV 0.1µF) [C22] Capacitor(10WV 0.027µF) [C35] Capacitor(10WV 0.047µF) [C23,C27] Capacitor(50WV 0.068µF) [C15,C19] Capacitor(16WV 0.1µF) [C48,C37] Capacitor(50WV 1800pF) [C2,C1] Capacitor(50WV 330pF) [C45] Capacitor(50WV 3300pF) [C50] Capacitor(50WV 820pF) [C30] Diode(S1ZB60) [REC1] Diode(1SS133) [D7] Diode(1SS355) [D6,D5] Zener diode(HZS2C1) [ZD1,ZD2,ZD7,ZD8] Zener diode(HZ3B1) [ZD5] Zener diode(MTZJ39B) [ZD11] Zener diode(MTZJ4R7B) [ZD3,ZD4,ZD9,ZD10] Zener diode(MTZJ6.8B) [ZD6] IC(BU4066BCF1) [IC5] IC(NJM3414M) [IC2,IC1] IC(NJM4558MF1) [IC4] IC(THS56F) [IC3] Photo coupler(TLP621) [PC3] Photo coupler(TLP627) [PC1,PC2] Arrestor(DSS-401M) [SA1,SA2] Varistor(DSS301L) [SA3] Varistor(TNR5V101K) [VA1] –6– コネクター モジュラージャック モジュラージャック コンデンサー コンデンサー コンデンサー コンデンサー コンデンサー コイル コイル コイル フィルター リレー トランス トランス コンデンサー コンデンサー コンデンサー コンデンサー コンデンサー コンデンサー コンデンサー コンデンサー コンデンサー コンデンサー コンデンサー コンデンサー コンデンサー コンデンサー ダイオード ダイオード ダイオード ツェナーダイオード ツェナーダイオード ツェナーダイオード ツェナーダイオード ツェナーダイオード IC IC IC IC フォトカプラー フォトカプラー アレスター バリスタ バリスタ 5 TEL/LIU 基板 (TEL/LIU PWB U)…EUROPE NO. PARTS CODE PRICE RANK Ex. Ja. AA DD AA DD AA DD AA DD AA DD AA DD AA DD AA DD AA DD AA DD AA DD AA DD NEW MARK PART RANK C C C C C C C C C C C C DESCRIPTION 62 VRS-CZ1JD103J AA DD C VRS-CZ1JD104J VRS-CZ1JD113J VRS-CZ1JD153J VRS-CZ1JD203J VRS-CZ1JD223J VRS-CZ1JD243J VRS-CZ1JD271J VRS-CZ1JD273J VRS-CZ1JD301J VRS-CZ1JD303J VRS-CZ1JD333J VRS-CZ1JD363J VRS-CZ1JD472J VRS-CZ1JD561J VRS-CZ1JD621J VRS-VV3LB821J AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AC DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD C C C C C C C C C C C C C C C C 82 VSDTC143ZKA-1 AC DJ B 83 VS2SA1807-P-1 84 VS2SA821S//-1 85 VS2SC2412KS-1 (Unit) 901 CPWBN1620FCE1 AE AC AB DS DJ DD B B B Resistor(1/4W 10Ω ±5%) [R19,R24] Resistor(1/4W 10KΩ ±5%) [R35] Resistor(1/4W 11KΩ ±5%) [R22] Resistor(1/4W 12Ω ±5%) [R30] Resistor(1/4W 12KΩ ±5%) [R36] Resistor(1/4W 15Ω ±5%) [R23,R21] Resistor(1/4W 180Ω ±5%) [R56,R57] Resistor(1/4W 3.3KΩ ±5%) [R13] Resistor(1/4W 470Ω ±5%) [R15] Resistor(1/4W 470KΩ ±5%) [R34] Resistor(1/4W 51KΩ ±5%) [R41] Resistor(1/16W 0Ω ±5%) [R38] Resistor(1/16W 10KΩ ±5%) [R5,R6,R32,R39,R43,R44,R45,R47,R55] Resistor(1/16W 100KΩ ±5%) [R37] Resistor(1/16W 11KΩ ±5%) [R14,R25] Resistor(1/16W 15KΩ ±5%) [R17] Resistor(1/16W 20KΩ ±5%) [R46,R29] Resistor(1/16W 22KΩ ±5%) [R2,R4,R27,R53] Resistor(1/16W 24KΩ ±5%) [R52] Resistor(1/16W 270Ω ±5%) [R12] Resistor(1/16W 27KΩ ±5%) [R48,R26] Resistor(1/16W 300Ω ±5%) [R11] Resistor(1/16W 30KΩ ±5%) [R18,R54] Resistor(1/16W 33KΩ ±5%) [R7] Resistor(1/16W 36KΩ ±5%) [R1,R3] Resistor(1/16W 4.7KΩ ±5%) [R50] Resistor(1/16W 560Ω ±5%) [R16] Resistor(1/16W 620Ω ±5%) [R10] Resistor(3W 820Ω ±5%) [R9] Transistor(DTC143ZKA) [Q3,Q5,Q6,Q7,Q8,Q10,Q11,Q12,Q13] Transistor(2SA1807-P) [Q1] Transistor(2SA821S) [Q4] Transistor(2SC2412KS) [Q9] BQ LP E TEL/LIU PWB unit 50 51 52 53 54 55 56 57 58 59 60 61 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 80 VRD-HT2EY100J VRD-HT2EY103J VRD-HT2EY113J VRD-HT2EY120J VRD-HT2EY123J VRD-HT2EY150J VRD-HT2EY181J VRD-HT2EY332J VRD-HT2EY471J VRD-HT2EY474J VRD-HT2EY513J VRS-CZ1JD000J N 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 トランジスター トランジスター トランジスター トランジスター [EUROPE] TEL/LIU 基板 6 TEL/LIU 基板 (TEL/LIU PWB U)…Australia,New Zealand NO. ! ! 1 2 3 4 6 7 10 11 12 13 14 15 16 17 PARTS CODE QCNCW1155FCZZ QJAKT0001FCZZ QJAKT0004QSZZ RC-EZ0362FCPZ RC-EZ0365FCPZ RC-EZ0366FCPZ RC-EZ0369FCPZ RC-KZ0008QCZZ RCILZ0008QSZZ RCILZ0089FCZZ RFILN2011SCZZ RRLYZ2413QCZZ RTRNI2142SCZZ RTRNZ2140SCZZ PRICE RANK Ex. Ja. AE DJ AD DJ AE DJ AC DD AB DD AB DD AB DD AB DD AD DJ AG DX AC DJ AX FG AN EQ AN EQ NEW MARK N N N N PART RANK C C C C C C C C C C C B B B VCCCCZ1EH221J AB DD C VCCCCZ1EH221J AB DD C VCFYDA1HA334J VCFYJU2EA474K VCFYJU2EA824K VCKYCZ1AB104K VCKYCZ1AB473K VCKYCZ1AB683K VCKYCZ1CF104Z VCKYCZ1HB331K VCKYCZ1HB332K VCKYCZ1HB471K VCKYCZ1HB681K VHDS1ZB60//-1 VHD1SS133//-1 VHD1SS355//-1 VHEHZS2C1//-1 VHEMTZJ30B/-1 VHEMTZJ39B/-1 AC AD AE AC AB AB AB AA AA AA AA AC AA AB AB AB AC DJ DJ DJ DD DD DD DD DD DD DD DD DJ DD DJ DJ DJ DJ C C C C C C C C C C C B B B B B B 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 DESCRIPTION Connector(30FE-BT-VK-N) [CN1] Modular Jack(MJ62J-RD315) [MJ2] Modular Jack(MJ66J-RD315) [MJ1] Capacitor(16WV 10µF N.P 105 ℃ (LF)) [C60] Capacitor(25WV 47µF 105 ℃ (LF)) [C38,C53] Capacitor(50WV 1µF 105 ℃ (LF)) [C21,C16] Capacitor(50WV 4.7µF 105 ℃ (LF)) [C58,C7] Capacitor(50WV 0.1µF) [C8,C13,C36,C46,C54,C57,C59] Coil(1mH 250mA) [L8] Coil(ST110AV) [L5] Filter(SBT-0260) [L3,L1] Relay(TXD2-2M-12V) [RY2,RY1] Transformer(I2142) [T1] Transformer(Z2140) [T2] Capacitor(25WV 220pF) [C3,C4,C5,C10,C11,C12,C24,C25,C26,C28] Capacitor(25WV 220pF) [C29,C39,C40,C41,C43,C44,C51,C52,C55] Capacitor(50WV 0.33µF) [C18] Capacitor(250WV 0.47µF) [C47] Capacitor(250WV 0.82µF) [C49] Capacitor(10WV 0.1µF) [C19] Capacitor(10WV 0.047µF) [C23] Capacitor(50WV 0.068µF) [C35] Capacitor(16WV 0.1µF) [C48,C37] Capacitor(50WV 330pF) [C45] Capacitor(50WV 3300pF) [C50] Capacitor(50WV 470pF) [C2,C1] Capacitor(50WV 680pF) [C30] Diode(S1ZB60) [REC1] Diode(1SS133) [D7] Diode(1SS355) [D6,D5] Zener diode(HZS2C1) [ZD1,ZD2,ZD7,ZD8] Zener diode(HZ3B1) [ZD5] Zener diode(MTZJ39B) [ZD11] –7– コネクター モジュラージャック モジュラージャック コンデンサー コンデンサー コンデンサー コンデンサー コンデンサー コイル コイル フィルター リレー トランス トランス コンデンサー コンデンサー コンデンサー コンデンサー コンデンサー コンデンサー コンデンサー コンデンサー コンデンサー コンデンサー コンデンサー コンデンサー コンデンサー ダイオード ダイオード ダイオード ツェナーダイオード ツェナーダイオード ツェナーダイオード 6 TEL/LIU 基板 (TEL/LIU PWB U)…Australia,New Zealand NO. 36 37 38 39 40 41 42 43 44 45 47 48 49 50 51 52 53 54 55 PARTS CODE VHEMTZJ4R7B-1 VHEMTZJ6R8B-1 VHIBU4066BCF1 VHINJM3414M-1 VHINJM4558MF1 VHITHS56F//-1 VHPTLP621-1GB VHPTLP627//-1 VHVDSS-401M// VHVDSS301L/-1 VRD-HT2EY100J VRD-HT2EY103J VRD-HT2EY150J VRD-HT2EY163J VRD-HT2EY181J VRD-HT2EY301J VRD-HT2EY332J VRD-HT2EY513J VRS-CZ1JD000J PRICE RANK Ex. Ja. AC DJ AC DJ AD DJ AF DX AE DJ AS EZ AF DX AH EB AH DX AF DS AA DD AA DD AA DD AA DD AA DD AA DD AA DD AA DD AA DD NEW MARK PART RANK B B B B B B B B B B C C C C C C C C C 56 VRS-CZ1JD103J AA DD C VRS-CZ1JD104J VRS-CZ1JD112J VRS-CZ1JD113J VRS-CZ1JD153J VRS-CZ1JD203J VRS-CZ1JD223J VRS-CZ1JD243J VRS-CZ1JD303J VRS-CZ1JD333J VRS-CZ1JD431J VRS-CZ1JD471J VRS-CZ1JD472J VRS-CZ1JD563J VRS-CZ1JD912J VSDTC143ZKA-1 VS2SC2412KS-1 AA AA AA AA AA AA AA AA AA AF AA AA AA AA AC AB DD DD DD DD DD DD DD DD DD DS DD DD DD DD DJ DD C C C C C C C C C C C C C C B B 57 58 59 60 61 62 63 64 65 66 67 68 69 70 74 75 DESCRIPTION Zener diode(MTZJ4R7B) [ZD3,ZD4,ZD9,ZD10] Zener diode(MTZJ6.8B) [ZD6] IC(BU4066BCF1) [IC5] IC(NJM3414M) [IC1,IC2] IC(NJM4558MF1) [IC4] IC(THS56F) [IC3] Photo coupler(TLP621) [PC3] Photo coupler(TLP627) [PC1,PC2] Arrestor(DSS-401M) [SA1,SA2] Varistor(DSS301L) [SA3] Resistor(1/4W 10Ω ±5%) [R19,R24] Resistor(1/4W 10KΩ ±5%) [R22] Resistor(1/4W 15Ω ±5%) [R23,R21] Resistor(1/4W 16KΩ ±5%) [R36] Resistor(1/4W 180Ω ±5%) [R56,R57] Resistor(1/4W 300Ω ±5%) [R15] Resistor(1/4W 3.3KΩ ±5%) [R13] Resistor(1/4W 51KΩ ±5%) [R41] Resistor(1/16W 0Ω ±5%) [R8,R20,R28,R31] Resistor(1/16W 10KΩ ±5%) [R5,R6,R32,R39,R43,R44,R45,R47,R55] Resistor(1/16W 100KΩ ±5%) [R37] Resistor(1/16W 1.1KΩ ±5%) [R10] Resistor(1/16W 11KΩ ±5%) [R25] Resistor(1/16W 15KΩ ±5%) [R17] Resistor(1/16W 20KΩ ±5%) [R46,R29] Resistor(1/16W 22KΩ ±5%) [R2,R4,R53] Resistor(1/16W 24KΩ ±5%) [R18,R26,R48,R52] Resistor(1/16W 30KΩ ±5%) [R54] Resistor(1/16W 33KΩ ±5%) [R27] Resistor(1/16W 430Ω ±5%) [R12] Resistor(1/16W 470Ω ±5%) [R16] Resistor(1/16W 4.7KΩ ±5%) [R50] Resistor(1/16W 56KΩ ±5%) [R3,R1] Resistor(1/16W 9.1KΩ ±5%) [R14] Transistor(DTC143ZKA) [Q3,Q5,Q6,Q7,Q8,Q10,Q11,Q12,Q13] Transistor(2SC2412KS) [Q9] –8– ツェナーダイオード ツェナーダイオード IC IC IC IC フォトカプラー フォトカプラー アレスター バリスタ 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 トランジスター トランジスター 7 モデムコントロール基板 (Modem control PWB U) NO. 1 2 3 4 6 7 PARTS CODE QCNCM1069ACZZ QCNCM7014SC0B QCNCM7014SC0C QCNCW1155FCZZ QSOCN0082FCZZ QSOCZ0094FCPZ PRICE RANK Ex. Ja. AD DD AD DJ AA DD AE DJ AP EQ AL EG NEW MARK PART RANK C C C C C C RC-KZ0008QCZZ AB DD C RC-KZ0008QCZZ AB DD C RCORF1072ACZZ AB DJ C RCORF1072ACZZ 11 RCRSP0069FCZZ 14 RFILN0047FCZZ 15 RFILZ1042LCZZ AB AG AC AC DJ DS DJ DJ C B C C RMPTR4470ACZZ AB DD B RMPTR4470ACZZ AB DD B RMPTR4470ACZZ AB DD B RMPTR4470ACZZ AB DD B RMPTR4470ACZZ 17 VCCCCZ1EH151J AB AA DD DD B C 18 VCCCCZ1HH100D AA DD C 19 VCCCCZ1HH101J AA DD C 20 VCEASM1CM106M AB DD 21 VCEASM1EM107M 24 VCFYDA1HA104J 25 VCFYDA1HA105J AD AC AE DJ DD DJ VCKYCZ1AF224Z AC DD C VCKYCZ1AF224Z AC DD C VCKYCZ1CB103K AA DD C VCKYCZ1CB103K AA DD C VCKYCZ1CF104Z AB DD C VCKYCZ1CF104Z AB DD C VCKYCZ1CF104Z AB DD C VCKYCZ1CF104Z AB DD C VCKYCZ1CF104Z AB DD C VCKYCZ1CF104Z 29 VCKYCZ1EB472K AB AA DD DD C C 30 VCKYCZ1HB102K AA DD C VCKYCZ1HB222K VCKYCZ1HB471K VCKYCZ1HB681K VHD1SS355//-1 VHDRB751V40-1 VHI74LCX04FT1 VHICAT24W02-1 VHIT4052BFF-1 VHI74LCX74T-1 VHILM1117M3-1 VHIMAX3225E-1 VHIN195006E-1 VHINJM2113M-1 VHINJM4558MF1 VHINJM78L05A1 VHIPST591CMT1 VHISD4M16L1-1 VHISH770910-1 VHITD62503F/VHIUPD659461C VHPSLR322VC3F VRD-HT2EY751J AA AA AA AB AD AE AG AG AG AH AT BK AG AE AD AE AZ BH AG BA AC AA DD DD DD DJ DJ DS DS DX DS DX EZ HC DS DJ DJ DS FX GX DX FX DJ DD C C C B B B B B B B B B B B B B B B B B B C VRS-CZ1JD000J AA DD C VRS-CZ1JD000J AA DD C 9 10 16 26 27 28 31 32 33 34 35 38 41 43 44 45 46 48 49 50 51 53 54 55 57 60 61 62 C N N C C C 63 DESCRIPTION Connector(6pin) [CN8] Connector(2pin) [CN5] Connector(3pin) [CN7] Connector(30FE-BT-VK-N) [CN6] Socket(DX10G1M26SE) [CN1] ROM Socket(2SD72AR1131) [CN4] Capacitor(50WV 0.1µF) [C35,C45,C46,C47,C48,C49,C50,C51,C52,C56,C58,C97] Capacitor(50WV 0.1µF) [C99,C100,C157,C186] Core(BLM15AG601S) [R218,R219,R220,R221,R222,R237,R238,R239,R240,R241] Core(BLM15AG601S) [R242] Crystal(14.7456MHz) [X2] Filter(MMZ1608S121) [NF2] Filter(1000pF) [NF1] Block resistor(47Ω×4) [BR1,BR2,BR3,BR4,BR5,BR6,BR7,BR8,BR9,BR10,BR11] Block resistor(47Ω×4) [BR12,BR13,BR14,BR15,BR16,BR17,BR18,BR19,BR20,BR21] Block resistor(47Ω×4) [BR22,BR23,BR24,BR25,BR26,BR27,BR28,BR29,BR30,BR31] Block resistor(47Ω×4) [BR32,BR33,BR34,BR35,BR36,BR37,BR38,BR39,BR40,BR41] Block resistor(47Ω×4) [BR42,BR43,BR44,BR45,BR46,BR47] Capacitor(25WV 150pF) [C1004] Capacitor(50WV 10pF) [C2,C7,C108,C109,C1000,C1005,C1007,C1033,C1035] Capacitor(50WV 100pF) [C91,C96] Capacitor(16WV 10µF) [C11,C80,C82,C83,C84,C89,C114,C128] Capacitor(25WV 100µF) [C123,C154,C176] Capacitor(50WV 0.1µF) [C39,C67] Capacitor(50WV 1µF) [C126,C122] Capacitor(10WV 0.22µF) [C107,C110,C111,C112,C113,C125,C127,C143,C144,C152] Capacitor(10WV 0.22µF) [C155,C177,C178,C179,C180,C181] Capacitor(16WV 0.010µF) [C147,C148,C149,C150,C151,C159,C164,C165,C166,C167] Capacitor(16WV 0.010µF) [C168,C169] Capacitor(16WV 0.1µF) [C1,C3,C8,C9,C13,C14,C15,C16,C17,C21,C22,C24,C25] Capacitor(16WV 0.1µF) [C26,C27,C29,C30,C31,C32,C33,C34,C36,C37,C38,C42] Capacitor(16WV 0.1µF) [C43,C54,C62,C63,C65,C68,C69,C70,C73,C74,C75,C76] Capacitor(16WV 0.1µF) [C77,C81,C85,C86,C90,C93,C94,C95,C101,C102,C103] Capacitor(16WV 0.1µF) [C104,C115,C116,C117,C119,C121,C124,C129,C131,C132] Capacitor(16WV 0.1µF) [C133] Capacitor(25WV 4700pF) [C55] Capacitor(50WV 1000pF) [C23,C53,C59,C60,C61,C87,C88,C140] Capacitor(50WV 2200pF) [C64] Capacitor(50WV 470pF) [C6,C5] Capacitor(50WV 680pF) [C92] Diode(1SS355) [D1,D2,D8,D9,D12] Diode(RB751V-40) [D4,D5,D6,D7,D17,D18] IC(74LCX04FT1) [IC12] IC(CAT24W02) [IC7] IC(T4052BFF) [IC13] IC(TC74LCX74FT) [IC28] IC(LM1117MPX3) [IC21] IC(MAX3225E) [IC10,IC11] IC(N195006E) [IC27] IC(NJM2113-M) [IC16] IC(NJM4558MF1) [IC14] IC(NJM78L05A1) [IC8] IC(PST591CMT1) [IC2] IC(SD4M16L1) [IC23,IC24,IC26] IC(SH770910) [IC17] IC(TD62503F) [IC9] IC(UPD659461) [IC25] LED(Red)(SLR322VC3F) [LED3,LED2] Resistor(1/4W 750Ω ±5%) [R115] Resistor(1/16W 0Ω ±5%) [R12,R21,R30,R31,R32,R33,R34,R36,R37,R38,R39,R41] Resistor(1/16W 0Ω ±5%) [R42,R89,R143,R147,R155,R161,R163,R167,R171,R179] –9– コネクター コネクター コネクター コネクター ソケット ROM ソケット コンデンサー コンデンサー コア コア クリスタル フィルター フィルター ブロック抵抗 ブロック抵抗 ブロック抵抗 ブロック抵抗 ブロック抵抗 コンデンサー コンデンサー コンデンサー コンデンサー コンデンサー コンデンサー コンデンサー コンデンサー コンデンサー コンデンサー コンデンサー コンデンサー コンデンサー コンデンサー コンデンサー コンデンサー コンデンサー コンデンサー コンデンサー コンデンサー コンデンサー コンデンサー ダイオード ダイオード IC IC IC IC IC IC IC IC IC IC IC IC IC IC IC LED 抵抗 抵抗 抵抗 7 モデムコントロール基板 (Modem control PWB U) NO. PARTS CODE PRICE RANK Ex. Ja. NEW MARK PART RANK DESCRIPTION VRS-CZ1JD000J AA DD C VRS-CZ1JD000J 64 VRS-CZ1JD101J AA AA DD DD C C VRS-CZ1JD102J AA DD C VRS-CZ1JD102J AA DD C VRS-CZ1JD103J AA DD C 66 VRS-CZ1JD103J AA DD C VRS-CZ1JD103J AA DD C VRS-CZ1JD104J VRS-CZ1JD122J VRS-CZ1JD123J VRS-CZ1JD154F VRS-CZ1JD183J VRS-CZ1JD203J VRS-CZ1JD220J VRS-CZ1JD222J VRS-CZ1JD272J VRS-CZ1JD273J VRS-CZ1JD302J VRS-CZ1JD330J VRS-CZ1JD333J VRS-CZ1JD363F VRS-CZ1JD363J VRS-CZ1JD393J AA AA AA AA AA AA AA AA AA AA AA AA AA AB AA AA DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD C C C C C C C C C C C C C C C C VRS-CZ1JD470J AA DD C VRS-CZ1JD470J AA DD C 83 VRS-CZ1JD470J AA DD C VRS-CZ1JD470J AA DD C VRS-CZ1JD470J AA DD C 84 VRS-CZ1JD471J AA DD C VRS-CZ1JD472J AA DD C VRS-CZ1JD472J AA DD C VRS-CZ1JD472J AA DD C 86 VRS-CZ1JD473J AA DD C VRS-CZ1JD510J VRS-CZ1JD513J VRS-CZ1JD560J VRS-CZ1JD563F VRS-CZ1JD682J VRS-CZ1JD683J VRS-CZ1JD912J VRS-CZ1JD913J VS2SA1577Q/RC VS2SD592A//-1 VSDTA114EUA-1 AA AA AA AA AA AA AA AA AC AE AC DD DD DD DD DD DD DD DD DD DJ DJ C C C C C C C C B B B VSDTC143ZUA-1 AC DJ B VSDTC143ZUA-1 AC DJ B VSDTC143ZUA-1 (Unit) 901 CPWBX1618FCE1 AC DJ B Resistor(1/16W 0Ω ±5%) [R180,R181,R189,R190,R191,R192,R193,R210,R211,R212] Resistor(1/16W 0Ω ±5%) [R215,R217,R228,R246] Resistor(1/16W 100Ω ±5%) [R141,R223,R255] Resistor(1/16W 1.0KΩ ±5%) [R10,R15,R65,R66,R67,R109,R111,R113,R114,R116,R139] Resistor(1/16W 1.0KΩ ±5%) [R140,R149,R174,R195,R243,R244] Resistor(1/16W 10KΩ ±5%) [R45,R69,R70,R71,R78,R79,R85,R106,R110,R112,R118] Resistor(1/16W 10KΩ ±5%) [R128,R138,R145,R152,R153,R158,R159,R176,R177,R178] Resistor(1/16W 10KΩ ±5%) [R184,R185,R186,R194,R224,R227] Resistor(1/16W 100KΩ ±5%) [R84,R131,R136] Resistor(1/16W 1.2KΩ ±5%) [R148] Resistor(1/16W 12KΩ ±5%) [R88] Resistor(1/16W 150KΩ ±1%) [R127] Resistor(1/16W 18KΩ ±5%) [R81,R129] Resistor(1/16W 20KΩ ±5%) [R133] Resistor(1/16W 22Ω ±5%) [R26] Resistor(1/16W 2.2KΩ ±5%) [R117] Resistor(1/16W 2.7KΩ ±5%) [R123] Resistor(1/16W 27KΩ ±5%) [R16] Resistor(1/16W 3KΩ ±5%) [R90] Resistor(1/16W 33Ω ±5%) [R47,R183,R201,R214,R261,R262] Resistor(1/16W 33KΩ ±5%) [R86,R87] Resistor(1/16W 36KΩ ±1%) [R164,R169] Resistor(1/16W 36KΩ ±5%) [R130] Resistor(1/16W 39KΩ ±5%) [R82] Resistor(1/16W 47Ω ±5%) [R3,R18,R19,R22,R23,R24,R29,R46,R68,R72,R73,R74] Resistor(1/16W 47Ω ±5%) [R75,R76,R77,R92,R93,R94,R95,R96,R97,R98,R99,R100] Resistor(1/16W 47Ω ±5%) [R101,R102,R103,R105,R107,R108,R137,R144,R187,R188] Resistor(1/16W 47Ω ±5%) [R197,R198,R199,R200,R208,R209,R225,R229,R230,R231] Resistor(1/16W 47Ω ±5%) [R232,R233,R234,R235,R236,R245,R247,R248,R258,R259] Resistor(1/16W 470Ω ±5%) [R63,R104] Resistor(1/16W 4.7KΩ ±5%) [R4,R5,R6,R7,R14,R17,R25,R35,R40,R43,R44,R50,R120] Resistor(1/16W 4.7KΩ ±5%) [R121,R122,R124,R150,R151,R154,R160,R205,R216,R256] Resistor(1/16W 4.7KΩ ±5%) [R257,R11,R20] Resistor(1/16W 47KΩ ±5%) [R173,R213,R226,R249,R250,R251,R252,R253,R254] Resistor(1/10W 51Ω ±5%) [R204,R203] Resistor(1/16W 51KΩ ±5%) [R135] Resistor(1/16W 56Ω ±5%) [R196] Resistor(1/16W 56KΩ ±1%) [R126] Resistor(1/16W 6.8KΩ ±5%) [R134,R91] Resistor(1/16W 68KΩ ±5%) [R132] Resistor(1/16W 9.1KΩ ±5%) [R83] Resistor(1/16W 91KΩ ±5%) [R80] Transistor(2SA1577Q/RC) [TR8] Transistor(2SD592A) [TR25] Transistor(DTA114EUA) [TR27,TR15] Transistor(DTC143ZUA) [TR2,TR3,TR4,TR5,TR6,TR7,TR9,TR10,TR11,TR12,TR13] Transistor(DTC143ZUA) [TR14,TR16,TR17,TR18,TR19,TR20,TR21,TR22,TR23,TR24] Transistor(DTC143ZUA) [TR26,TR28,TR29] CC TZ E Modem control PWB unit 63 65 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 85 87 88 89 90 91 92 94 95 96 97 98 99 N – 10 – 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 トランジスター トランジスター トランジスター トランジスター トランジスター トランジスター モデムコントロール基板 8 FAX インターフェース基板 U(FAX interface PWB U) NO. 1 2 3 4 5 6 7 8 9 10 11 12 901 PARTS CODE QCNCW1180FCZZ QSOCN0082FCZZ QSOCZ0092FCZZ RC-KZ0008QCZZ VCEASM1CM106M VCKYCZ1CF104Z VHILHF80J01-1 VHIMAX3225E-1 VHVICPS1.2/-1 VRS-CZ1JD000J VRS-CZ1JD000J VRS-CZ1JD101J VRS-CZ1JD101J VRS-CZ1JD101J VRS-CZ1JD101J VRS-CZ1JD472J (Unit) CPWBX1640FCE1 PRICE RANK Ex. Ja. AN EG AP EQ AR EQ AB DD AB DD AB DD AX FG AT EZ AF DS AA DD AA DD AA DD AA DD AA DD AA DD AA DD BL HL NEW MARK N PART RANK C C C C C C B B B C C C C C C C E DESCRIPTION Connector(100R2.8JXKS) [CN3] Socket(DX10G1M26SE) [CN1] Socket(177827-1) [CN2] Capacitor(50WV 0.1µF) [C1,C2,C7,C8,C12,C13,C14,C15] Capacitor(16WV 10µF) [C24] Capacitor(16WV 0.1µF) [C3,C4,C5,C6,C9,C10,C11,C17,C25] IC(LHF80J01) [IC1,IC2] IC(MAX3225E) [IC3,IC4] IC protecrot(ICPS1.2) [F1] Resistor(1/16W 0Ω ±5%) [R3,R4,R6,R7,R12,R13,R14] Resistor(1/16W 0Ω ±5%) [R15,R16,R17,R18,R19] Resistor(1/16W 100Ω ±5%) [R21,R22,R23,R24,R25,R26,R27] Resistor(1/16W 100Ω ±5%) [R28,R29,R30,R31,R32,R33,R34] Resistor(1/16W 100Ω ±5%) [R35,R36,R37,R38,R39,R40,R41] Resistor(1/16W 100Ω ±5%) [R42,R43,R44,R45] Resistor(1/16W 4.7KΩ ±5%) [R1,R2,R5,R8,R9,R10,R11,R20] コネクター ソケット ソケット コンデンサー コンデンサー コンデンサー IC IC IC プロテクター 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 抵抗 FAX interface PWB unit FAX インターフェース基板 U 9 FAX AC 電源基板 (FAX AC power supply unit)…100V series NO. 1 2 3 4 5 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 PARTS CODE 0FT23040224// 0FT23042251// 0FT23075095// 0FT23194310// 0FT23314081// 0FT23423816// 0FT23432963// 0FT23485706// 0FT23559467// 0FT23562328// 0FT23562379// 0FT23562379// 0FT23562549// 0FT23562700// 0FT23562700// 0FT23562727// 0FT23562816// 0FT23562816// 0FT23562859// 0FT23563103// 0FT23563103// 0FT23563324// 0FT23563324// 0FT23598977// 0FT23611329// 0FT23642925// 0FT23644634// 0FT23665429// 0FT23671666// 0FT23697355// 0FT23736903// 0FT23462226// 0FT23462226// 0FT23462234// 0FT23462234// 0FT23462234// 0FT23462234// 0FT23462250// 0FT23462250// 0FT23462250// 0FT23462250// 0FT23462250// 0FT23462269// 0FT23462269// 0FT23462269// 0FT23462293// 0FT23463362// 0FT23536106// 0FT23536106// 0FT23536106// 0FT23538850// 0FT23538850// 0FT23538885// 0FT23538915// PRICE RANK Ex. Ja. AD DJ AP EQ AP EQ AU EZ AU EZ AC DJ AC DJ AK DX AR EQ AD DJ AD DJ AD DJ AD DJ AD DJ AD DJ AD DJ AC DJ AC DJ AD DJ AD DJ AD DJ AC DJ AC DJ AK DX AK DX AK DX AK DX AU EZ AU EZ AU EZ AX FG AD DJ AD DJ AD DJ AD DJ AD DJ AD DJ AD DJ AD DJ AD DJ AD DJ AD DJ AD DJ AD DJ AD DJ AD DJ AD DJ AD DJ AD DJ AD DJ AD DJ AD DJ AD DJ AD DJ NEW MARK PART RANK C C C B B C C C B C C C C C C C C C C C C C C C C B B B B B B C C C C C C C C C C C C C C C C C C C C C C C DESCRIPTION Angle(TC-92 30X36X1T) Fin(AL1 30X30) Connector(B6P-VH) Thermistor(NTH11D8R0LA) IC(UPC393C) Screw(M3X8 S NP3 W ・ SW) Screw(M3X10 S NP3 W.SW) Connector(B2B-PH-K-S) Transistor(2SC3588 HFE=L:K) Resistor(RSMF2SL 68KΩJ) Resistor(RSMF12SL 1ΩJ) Resistor(RSMF12SL 1ΩJ) Resistor(RSMF12SL 330ΩJ) Resistor(RSMF12SL 47KΩJ) Resistor(RSMF12SL 47KΩJ) Resistor(RSMF12SL 100KΩJ) Resistor(RSMF1SL 2.2ΩJ) Resistor(RSMF1SL 2.2ΩJ) Resistor(RSMF1SL 10ΩJ) Resistor(RSMF1SL 47KΩJ) Resistor(RSMF1SL 47KΩJ) Resistor(RSMF2SL 100ΩJ) Resistor(RSMF2SL 100ΩJ) Connector(B3B-PH-K-S) Capacitor(MMC-104K400) Reactor(TG0113MADS SK) Variable resistor(EVM-4LGA00B13) IC(UPC78M24AHF) IC(UPC78M12AHF) Surge absorber(ERZV10D471) Rectifier(SF10SC4) Resistor(RK73K2ATD 470ΩJ) Resistor(RK73K2ATD 470ΩJ) Resistor(RK73K2ATD 1KΩJ) Resistor(RK73K2ATD 1KΩJ) Resistor(RK73K2ATD 1KΩJ) Resistor(RK73K2ATD 1KΩJ) Resistor(RK73K2ATD 2.2KΩJ) Resistor(RK73K2ATD 2.2KΩJ) Resistor(RK73K2ATD 2.2KΩJ) Resistor(RK73K2ATD 2.2KΩJ) Resistor(RK73K2ATD 2.2KΩJ) Resistor(RK73K2ATD 10KΩJ) Resistor(RK73K2ATD 10KΩJ) Resistor(RK73K2ATD 10KΩJ) Resistor(RK73K2ATD 560ΩJ) Resistor(RK73K2ATD 180ΩJ) Resistor(RK73K2ATD 1.5KΩJ) Resistor(RK73K2ATD 1.5KΩJ) Resistor(RK73K2ATD 1.5KΩJ) Resistor(RK73K2ATD 4.7KΩJ) Resistor(RK73K2ATD 4.7KΩJ) Resistor(RK73K2ATD 100ΩJ) Resistor(RK73K2ATD 5.6KΩJ) – 11 – [1] [2] [CN1] [TH1] [Z6] [5] [6] [CN4] [Q11] [R2] [R20] [R83] [R62] [R13] [R14] [R54] [R11] [R12] [R18] [R4] [R5] [R10] [R19] [CN2] [C6] [L4] [RV1] [Z2] [Z1] [NR1] [RC2] [R34] [R65] [R30] [R35] [R41] [R44] [R38] [R39] [R52] [R66] [R68] [R8] [R17] [R48] [R31] [R42] [RX2] [R22] [R59] [R46] [R67] [R69] [R71] 金具 フィン コネクタ サミスタ IC 小ワッシャ W セムスネジ 小ワッシャ W セムスネジ コネクタ トランジスタ 酸化金属被膜抵抗器 酸化金属被膜抵抗器 酸化金属被膜抵抗器 酸化金属被膜抵抗器 酸化金属被膜抵抗器 酸化金属被膜抵抗器 酸化金属被膜抵抗器 酸化金属被膜抵抗器 酸化金属被膜抵抗器 酸化金属被膜抵抗器 酸化金属被膜抵抗器 酸化金属被膜抵抗器 酸化金属被膜抵抗器 酸化金属被膜抵抗器 コネクタ フィルムコンデンサ リアクトル 可変抵抗器 IC IC サージアブソーバ 整流器 チップ抵抗器 チップ抵抗器 チップ抵抗器 チップ抵抗器 チップ抵抗器 チップ抵抗器 チップ抵抗器 チップ抵抗器 チップ抵抗器 チップ抵抗器 チップ抵抗器 チップ抵抗器 チップ抵抗器 チップ抵抗器 チップ抵抗器 チップ抵抗器 チップ抵抗器 チップ抵抗器 チップ抵抗器 チップ抵抗器 チップ抵抗器 チップ抵抗器 チップ抵抗器 9 FAX AC 電源基板 (FAX AC power supply unit)…100V series NO. 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 PARTS CODE 0FT23538923// 0FT23538974// 0FT23538982// 0FT23541509// 0FT23546047// 0FT23546047// 0FT23549119// 0FT23549119// 0FT23549119// 0FT23549119// 0FT23549119// 0FT23549119// 0FT23549119// 0FT23551148// 0FT23551377// 0FT23557111// 0FT23565505// 0FT23578194// 0FT23578194// 0FT23581330// 0FT23581330// 0FT23581330// 0FT23583309// 0FT23598470// 0FT23624293// 0FT23625591// 0FT23625591// 0FT23663914// 0FT33122675// 0FT33122675// 0FT33122675// 0FT33122675// 0FT33122675// 0FT33122675// 0FT33122675// 0FT33122675// 0FT33122675// 0FT33122675// 0FT33122675// 0FT33189184// 0FT23095657// 0FT23095657// 0FT23095657// 0FT23095657// 0FT23124819// 0FT23124827// 0FT23204782// 0FT23204790// 0FT23204790// 0FT23241823// 0FT23259382// 0FT23259420// 0FT23259447// 0FT23259498// 0FT23259498// 0FT23259498// 0FT23287629// 0FT23287637// 0FT23287696// 0FT23287823// 0FT23319431// 0FT23319431// 0FT23326101// 0FT23329089// 0FT23329089// 0FT23379450// 0FT23379450// 0FT23394395// 0FT23414892// 0FT23415341// 0FT23415430// 0FT23415570// 0FT23415570// 0FT23415570// 0FT23415600// 0FT23415643// 0FT23415651// 0FT23415716// 0FT23415740// 0FT23415899// PRICE RANK Ex. Ja. AD DJ AD DJ AD DJ AK DX AD DJ AD DJ AF DS AF DS AF DS AF DS AF DS AF DS AF DS AK DX AK DX AD DJ AD DJ AD DJ AD DJ AD DJ AD DJ AD DJ AG DX AG DX AD DJ AD DJ AD DJ AD DJ AF DS AF DS AF DS AF DS AF DS AF DS AF DS AF DS AF DS AF DS AF DS AD DJ AF DS AF DS AF DS AF DS AK DX AF DS AP EQ AP EQ AP EQ AP EQ AP EQ AP EQ AK DX AK DX AK DX AK DX AK DX AP EQ AP EQ AK DX AF DS AF DS AU EZ AK DX AK DX AU EZ AU EZ AU EZ AF DS AF DS AF DS AF DS AF DS AF DS AF DS AF DS AF DS AF DS AF DS AF DS NEW MARK PART RANK C C C B C C C C C C C C C B B C C C C C C C B B C C C C B B B B B B B B B B B C B B B B C C C C C B C C C C C C B B B C B B C C C B B C C C C C C C C C C C C C DESCRIPTION Resistor(RK73K2ATD 3.9KΩJ) Resistor(RK73K2ATD 2.7KΩJ) Resistor(RK73K2ATD 47ΩJ) Zener diode(RD8.2M-B2) Resistor(RK73K2ATD 100KΩJ) Resistor(RK73K2ATD 100KΩJ) Capacitor(GRM40R103K25PT) Capacitor(GRM40R103K25PT) Capacitor(GRM40R103K25PT) Capacitor(GRM40R103K25PT) Capacitor(GRM40R103K25PT) Capacitor(GRM40R103K25PT) Capacitor(GRM40R103K25PT) Zener diode(RD12M-B2-T1) Diode(SFPM-52VL) Resistor(RK73K2ATD 220ΩJ) Resistor(RK73K2ATD 220KΩJ) Resistor(RK73K2ATD 22ΩJ) Resistor(RK73K2ATD 22ΩJ) Capacitor(GRM40R104K25PT) Capacitor(GRM40R104K25PT) Capacitor(GRM40R104K25PT) Zener diode(RD5.6M-B2-T1) Zener diode(RD10M-B2-T1) Resistor(RK73K2ATD 27KΩJ) Resistor(RK73K2ATD 1.8KΩJ) Resistor(RK73K2ATD 1.8KΩJ) Resistor(RK73K2ATD 5.1KΩJ) Diode(KDS184RTK) Diode(KDS184RTK) Diode(KDS184RTK) Diode(KDS184RTK) Diode(KDS184RTK) Diode(KDS184RTK) Diode(KDS184RTK) Diode(KDS184RTK) Diode(KDS184RTK) Diode(KDS184RTK) Diode(KDS184RTK) Capacitor(GRM40-034R104K50PT) Transistor(2SC1815-Y:GR TPE2) Transistor(2SC1815-Y:GR TPE2) Transistor(2SC1815-Y:GR TPE2) Transistor(2SC1815-Y:GR TPE2) Capacitor(KME25VB-220 TC-04) Capacitor(KME25VB-47 TC-04) Capacitor(KME35VB-220 TC-04) Capacitor(KME35VB-100 TC-04) Capacitor(KME35VB-100 TC-04) Diode(EG01ZV0) Capacitor(KME10VB-470 TC-04) Capacitor(KME35VB-470 TC-04) Capacitor(KME50VB-1 TC-04) Capacitor(KME50VB-10 TC-04) Capacitor(KME50VB-10 TC-04) Capacitor(KME50VB-10 TC-04) Transistor(2SA1015-Y TPE2) Transistor(2SA1020-O:Y TPE6) Transistor(2SC3225 TPE6) Capacitor(KME50VB-22 TC-04) Diode(1SS119-14 TD) Diode(1SS119-14 TD) Capacitor(KME200VB-22 TC-04) Capacitor(KME50VB-47 TC-04) Capacitor(KME50VB-47 TC-04) IC(AN1431T-TA) IC(AN1431T-TA) Capacitor(KME10VB-3300 TC-03) Resistor(RDF14 TS 820ΩJ) Resistor(RDMF14 TS 22ΩJ) Resistor(RDMF14 TS 100ΩJ) Resistor(RDMF14 TS 1KΩJ) Resistor(RDMF14 TS 1KΩJ) Resistor(RDMF14 TS 1KΩJ) Resistor(RDMF14 TS 1.8KΩJ) Resistor(RDMF14 TS 3.9KΩJ) Resistor(RDMF14 TS 4.7KΩJ) Resistor(RDMF14 TS 10KΩJ) Resistor(RDMF14 TS 15KΩJ) Resistor(RDMF14 TS 100KΩJ) – 12 – [R37] [R7] [R23] [D11] [R57] [R63] [C10] [C13] [C14] [C39] [C50] [C54] [C55] [D5] [D62] [R21] [R56] [R43] [R51] [CX1] [CX2] [C36] [D42] [D46] [R16] [R36] [R40] [R33] [D6] [D10] [D12] [D44] [D45] [D47] [D54] [D55] [D61] [D63] [D66] [C24] [Q2] [Q7] [Q9] [Q12] [C27] [C29] [C23] [C17] [C25] [D36] [C37] [C20] [C34] [C15] [C35] [C56] [Q6] [Q4] [Q3] [C21] [D64] [D65] [C48] [C18] [C42] [Z7] [Z8] [C32] [R9] [R60] [R82] [RX1] [RX5] [RX6] [R89] [R58] [R49] [R53] [R45] [R55] チップ抵抗器 チップ抵抗器 チップ抵抗器 チップツェナーダイオード チップ抵抗器 チップ抵抗器 チップセラミックコンデンサ チップセラミックコンデンサ チップセラミックコンデンサ チップセラミックコンデンサ チップセラミックコンデンサ チップセラミックコンデンサ チップセラミックコンデンサ チップツェナーダイオード チップダイオード チップ抵抗器 チップ抵抗器 チップ抵抗器 チップ抵抗器 チップセラミックコンデンサ チップセラミックコンデンサ チップセラミックコンデンサ チップツェナーダイオード チップツェナーダイオード チップ抵抗器 チップ抵抗器 チップ抵抗器 チップ抵抗器 チップダイオード チップダイオード チップダイオード チップダイオード チップダイオード チップダイオード チップダイオード チップダイオード チップダイオード チップダイオード チップダイオード チップセラミックコンデンサ トランジスタ トランジスタ トランジスタ トランジスタ 電解コンデンサ 電解コンデンサ 電解コンデンサ 電解コンデンサ 電解コンデンサ ダイオード 電解コンデンサ 電解コンデンサ 電解コンデンサ 電解コンデンサ 電解コンデンサ 電解コンデンサ トランジスタ トランジスタ トランジスタ 電解コンデンサ ダイオード ダイオード 電解コンデンサ 電解コンデンサ 電解コンデンサ IC IC 電解コンデンサ カーボン抵抗器 カーボン抵抗器 カーボン抵抗器 カーボン抵抗器 カーボン抵抗器 カーボン抵抗器 カーボン抵抗器 カーボン抵抗器 カーボン抵抗器 カーボン抵抗器 カーボン抵抗器 カーボン抵抗器 9 FAX AC 電源基板 (FAX AC power supply unit)…100V series NO. ! ! ! PARTS CODE 0FT23429199// 0FT23484661// 0FT23486796// 0FT23486850// 0FT23486850// 0FT23543641// 0FT23605507// 0FT23605507// 0FT23605507// 0FT23605507// 0FT23610810// 0FT23610810// 0FT23610810// 0FT23610810// 0FT23610810// 0FT23610810// 0FT23610810// 0FT23610810// 0FT23624285// 0FT23690482// 0FT23752267// 0FT23752267// 0FT33005385// 0FT33036442// 0FT33055277// 0FT33186711// 0FT33213786// 0FT33213786// 0FT33295049// 0FT33388799// 0FT33552203// 0FT33570120// 0FT33008015// 0FT33035349// 0FT33085427// 0FT33146922// 0FT33173377// 0FT33197209// 0FT33199031// 0FT33213581// 0FT33262132// 0FT33262132// 0FT33293976// 0FT33331673// 0FT33441622// 0FT33441630// 0FT33478232// 0FT33509685// 0FT33529090// 0FT33529090// 0FT33529090// 0FT33529090// 0FT33568266// 0FT33570163// 0FT33570163// 0FT33603762// 0FT33603789// 0FT33638361// 0FT33638361// 0FT35863281// (Unit) 901 RDENC0004FCZ1 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 PRICE RANK Ex. Ja. AK DX AD DJ AK DX AK DX AK DX AK DX AK DX AK DX AK DX AK DX AK DX AK DX AK DX AK DX AK DX AK DX AK DX AK DX AK DX AD DJ AD DJ AD DJ AD DJ AD DJ AK DX AR EQ AK DX AK DX AK DX AP EQ AD DJ AD DJ AW FG AK DX AU EZ AK DX BA FX BA FX AW FG AP EQ AP EQ AP EQ AF DS AZ FQ AL EB AP EQ AZ FQ AP EQ AP EQ AP EQ AP EQ AP EQ BA FX AF DS AF DS BB GD BF GN BC GJ BC GJ BF GN BZ TR NEW MARK PART RANK B C C C C C B B B B B B B B B B B B B C C C C C C B C C C C C C B B B A B B B C B B C B C C C C C C C C B C C B B B B B E DESCRIPTION Diode(AK04V0) Resistor(RSMF12TS 0.22ΩJ) Capacitor(DE0905-979R471K2K) Capacitor(ECQ-B1H473KF4) Capacitor(ECQ-B1H473KF4) Fuse holder(EYF-52BCZ) Diode(1GU42 TPA3) Diode(1GU42 TPA3) Diode(1GU42 TPA3) Diode(1GU42 TPA3) Diode(S5688GTPA3) Diode(S5688GTPA3) Diode(S5688GTPA3) Diode(S5688GTPA3) Diode(S5688GTPA3) Diode(S5688GTPA3) Diode(S5688GTPA3) Diode(S5688GTPA3) Diode(EG01CV0) Resistor(RSMF12TS 10ΩJ) Resistor(RSMF12TS 2.2ΩJ) Resistor(RSMF12TS 2.2ΩJ) Resistor(RSMF12TS 4.7KΩJ) Resistor(RSMF12TS 180ΩJ) Terminal(TP00448-41) Transister(2SA1625-T HFE=M:L) Capacitor(DE1007-486E222M-KH) Capacitor(DE1007-486E222M-KH) Capacitor(DE0605-979SL470J2K) Capacitor(DE1207-486E332M-KH) Resistor(RSPF12TS 470KΩJ) Resistor(RSPF12TS 150KΩJ) Rectifier(D2SB60) Diode(RL2Z LF-A1) Transister(2SA1400 HFE=K) Fuse(51S040L AC125V 4A) Reactle(LF-4D-E822) Photo coupler(TLP747J(D4) 0884) Transister(2SC4130-O.Y) Fin(ST-S 20G PT1 15X35X10) Photo coupler(PC123FY2) Photo coupler(PC123FY2) Capacitor(DD104-63CH470J50) Regurator(UPC29M33HF) Capacitor(ECQU2A104ML P=15.0MM) Capacitor(ECQU2A224ML P=15.0MM) Capacitor(HU4 2D 331MRXS3SS DIA22X30L) Connector(B04B-XASK-1-A) Terminal(85163 #250) Terminal(85163 #250) Terminal(85163 #250) Terminal(85163 #250) Relay(SDT-S-112LMR) Resistor(RSPF1B 150KΩJ) Resistor(RSPF1B 150KΩJ) IC(PQ12RF1) Transformer(CXM41100-505) Relay(G2R-1A-E-TV8-ASI DC12V) Relay(G2R-1A-E-TV8-ASI DC12V) Transformer(EXT43420-635C) FAX AC power supply unit – 13 – [D14] [R84] [C11] [C12] [C16] [F1**] [D7] [D9] [D13] [D43] [D1] [D3] [D8] [D20] [D21] [D22] [D23] [D48] [D52] [R32] [R50] [R86] [R87] [R61] [4] [Q8] [C2] [C3] [C7] [C8] [R1] [R90] [RC1] [D38] [Q10] [F1] [L1] [PC2] [Q1] [9] [PC1] [PC3] [C38] [Z4] [C4] [C1] [C5] [CN3] [L] [L1F] [N] [N1F] [RL3] [R24] [R25] [Z3] [T1] [RL1] [RL2] [T2] ダイオード 酸化金属被膜抵抗器 セラミックコンデンサ フィルムコンデンサ フィルムコンデンサ フューズホルダー ダイオード ダイオード ダイオード ダイオード ダイオード ダイオード ダイオード ダイオード ダイオード ダイオード ダイオード ダイオード ダイオード 酸化金属被膜抵抗器 酸化金属被膜抵抗器 酸化金属被膜抵抗器 酸化金属被膜抵抗器 酸化金属被膜抵抗器 端子 トランジスタ セラミックコンデンサ セラミックコンデンサ セラミックコンデンサ セラミックコンデンサ 電力形被膜抵抗器 電力形被膜抵抗器 整流器 ダイオード トランジスタ ガラス管フューズ リアクトル フォトカプラ トランジスタ フィン フォトカプラ フォトカプラ セラミックコンデンサ IC レギュレータ フィルムコンデンサ フィルムコンデンサ 電解コンデンサ コネクタ ファストン端子 ファストン端子 ファストン端子 ファストン端子 リレー 電力形被膜抵抗器 電力形被膜抵抗器 IC 変圧器 リレー リレー 変圧器 [100V serise] FAX AC 電源ユニット F FAX AC 電源基板 (FAX AC power supply unit)…200V series NO. ! 1 2 3 4 5 6 7 8 9 10 11 12 13 14 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 34 35 36 37 38 39 40 41 42 43 44 45 46 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 66 67 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 PARTS CODE 0FT23581330// 0FT23581330// 0FT23415570// 0FT23536106// 0FT23415570// 0FT23415570// 0FT33441630// 0FT33213786// 0FT33213786// 0FT33441622// 0FT33478240// 0FT23633012// 0FT33295049// 0FT33388799// 0FT23549119// 0FT33428332// 0FT23486850// 0FT23549119// 0FT23549119// 0FT33061846// 0FT23486850// 0FT33061765// 0FT33045115// 0FT33061781// 0FT33045131// 0FT33061773// 0FT33189184// 0FT33061765// 0FT33113498// 0FT33061730// 0FT33073380// 0FT33061811// 0FT33061846// 0FT23581330// 0FT33169744// 0FT33293976// 0FT23549119// 0FT33045115// 0FT23549119// 0FT23549119// 0FT33061846// 0FT23075095// 0FT23598977// 0FT23617904// 0FT23617904// 0FT23551148// 0FT33122675// 0FT23605507// 0FT23610810// 0FT23605507// 0FT33122675// 0FT23541509// 0FT33122675// 0FT14365100// 0FT23429199// 0FT23610810// 0FT23610810// 0FT23610810// 0FT23610810// 0FT23241823// 0FT33035349// 0FT23583309// 0FT23605507// 0FT33122675// 0FT33122675// 0FT23598470// 0FT33122675// 0FT23610810// 0FT33122675// 0FT33122675// 0FT33122675// 0FT23551377// 0FT33122675// 0FT23319431// 0FT23319431// 0FT33122675// 0FT23355772// 0FT33131461// 0FT33618557// 0FT23543641// PRICE RANK Ex. Ja. AD DJ AD DJ AF DS AD DJ AF DS AF DS AP EQ AK DX AK DX AL EB AZ FQ AH DX AK DX AP EQ AF DS AK DX AK DX AF DS AF DS AK DX AK DX AP EQ AK DX AP EQ AK DX AP EQ AD DJ AP EQ AK DX AF DS AU EZ AK DX AK DX AD DJ AP EQ AF DS AF DS AK DX AF DS AF DS AK DX AP EQ AK DX AK DX AK DX AK DX AF DS AK DX AK DX AK DX AF DS AK DX AF DS AK DX AK DX AK DX AK DX AK DX AK DX AP EQ AK DX AG DX AK DX AF DS AF DS AG DX AF DS AK DX AF DS AF DS AF DS AK DX AF DS AF DS AF DS AF DS AF DS AF DS AP EQ AK DX NEW MARK PART RANK C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B A C DESCRIPTION Capacitor(GRM40R104K25PT (1RL=3000)) Capacitor(GRM40R104K25PT (1RL=3000)) Resistor(RDMF14 TS 1 K OHMJ) Resistor(RK73K2ATD 1.5K OHMJ (1RL=5000)) Resistor(RDMF14 TS 1 K OHMJ) Resistor(RDMF14 TS 1 K OHMJ) Capacitor(ECQU2A224ML (P=15.0MM)) Capacitor(DE1007-486E222M-KH スト (RL900)) Capacitor(DE1007-486E222M-KH スト (RL900)) Capacitor(ECQU2A104ML (P=15.0MM)) Capacitor(HU4 2G 680MRXS2SS DIA22X25L) Capacitor(MMC-473K630) Capacitor(DE0605-979SL470J2K (1R=1500)) Capacitor(DE1207-486E332M-KH(1R900)) Capacitor(GRM40R103K25PT (1RL=4000)) Capacitor(DE0705-979R221K2K) Capacitor(ECQ-B1H473KF4) Capacitor(GRM40R103K25PT (1RL=4000)) Capacitor(GRM40R103K25PT (1RL=4000)) Capacitor(KMF50VB-10 TC-04) Capacitor(ECQ-B1H473KF4) Capacitor(KMF35VB-100 TC-04) Capacitor(KMF50VB-47 TC-04) Capacitor(KMF35VB-470 TC-04) Capacitor(KMF50VB-22 TC-04) Capacitor(KMF35VB-220 TC-04) Capacitor(GRM40-034R104K50PT (1R=3000)) Capacitor(KMF35VB-100 TC-04) Capacitor(KMF25VB-220 TC-04) Capacitor(KMF25VB-47 TC-04) Capacitor(KMF10VB-3300 TC-03) Capacitor(KMF50VB-1 TC-04) Capacitor(KMF50VB-10 TC-04) Capacitor(GRM40R104K25PT) Capacitor(KMF10VB-470 TC-04) Capacitor(DD104-63CH470J50) Capacitor(GRM40R103K25PT (1RL=4000)) Capacitor(KMF50VB-47 TC-04) Capacitor(GRM40R103K25PT (1RL=4000)) Capacitor(GRM40R103K25PT (1RL=4000)) Capacitor(KMF50VB-10 TC-04) Connector(B6P-VH) Connector(B3B-PH-K-S) Diode(S5688JTPA3) Diode(S5688JTPA3) Zener diode(RD12M-B2-T1 (1RL=3000)) Diode(KDS184RTK (1RL=3000)) Diode(1GU42 TPA3) Diode(S5688GTPA3) Diode(1GU42 TPA3) Diode(KDS184RTK (1RL=3000)) Zener diode(RD8.2M-B2) Diode(KDS184RTK (1RL=3000)) Diode(EG01C) Diode(AK04V0) Diode(S5688GTPA3) Diode(S5688GTPA3) Diode(S5688GTPA3) Diode(S5688GTPA3) Diode(EG01ZV0) Diode(RL2Z LF-A1) Zener diode(RD5.6M-B2-T1 (1RL=3000)) Diode(1GU42 TPA3) Diode(KDS184RTK (1RL=3000)) Diode(KDS184RTK (1RL=3000)) Zener diode(RD10M-B2-T1 (1RL=3000)) Diode(KDS184RTK (1RL=3000)) Diode(S5688GTPA3) Diode(KDS184RTK (1RL=3000)) Diode(KDS184RTK (1RL=3000)) Diode(KDS184RTK (1RL=3000)) Diode(SFPM-52VL (1RL=1800)) Diode(KDS184RTK (1RL=3000)) Diode(1SS119-14 TD) Diode(1SS119-14 TD) Diode(KDS184RTK (1RL=3000)) Diode(RD36ES-B2 TA11R) Diode(1SS119-TE) Fuse(215 002 AC250V 2A) Fuse holder(EYF-52BCZ) – 14 – [CX1] [CX2] [RX1] [RX2] [RX5] [RX6] [C1] [C2] [C3] [C4] [C5] [C6] [C7] [C8] [C10] [C11] [C12] [C13] [C14] [C15] [C16] [C17] [C18] [C20] [C21] [C23] [C24] [C25] [C27] [C29] [C32] [C34] [C35] [C36] [C37] [C38] [C39] [C42] [C54] [C55] [C56] [CN1] [CN2] [D1] [D3] [D5] [D6] [D7] [D8] [D9] [D10] [D11] [D12] [D13] [D14] [D20] [D21] [D22] [D23] [D36] [D38] [D42] [D43] [D44] [D45] [D46] [D47] [D48] [D54] [D55] [D61] [D62] [D63] [D64] [D65] [D66] [D67] [D68] [F1] [F1**] チップセラミックコンデンサ チップセラミックコンデンサ カーボン抵抗器 チップ抵抗器 カーボン抵抗器 カーボン抵抗器 フィルムコンデンサ セラミックコンデンサ セラミックコンデンサ フィルムコンデンサ 電解コンデンサ フィルムコンデンサ セラミックコンデンサ セラミックコンデンサ チップセラミックコンデンサ セラミックコンデンサ フィルムコンデンサ チップセラミックコンデンサ チップセラミックコンデンサ 電解コンデンサー フィルムコンデンサ 電解コンデンサー 電解コンデンサー 電解コンデンサー 電解コンデンサー 電解コンデンサー チップセラミックコンデンサ 電解コンデンサー 電解コンデンサー 電解コンデンサー 電解コンデンサー 電解コンデンサー 電解コンデンサー チップセラミックコンデンサ 電解コンデンサー セラミックコンデンサ チップセラミックコンデンサ 電解コンデンサー チップセラミックコンデンサ チップセラミックコンデンサ 電解コンデンサー コネクタ コネクタ ダイオード ダイオード チップツェナーダイオード チップダイオード ダイオード ダイオード ダイオード チップダイオード チップツェナーダイオード チップダイオード ダイオード ダイオード ダイオード ダイオード ダイオード ダイオード ダイオード ダイオード チップツェナーダイオード ダイオード チップダイオード チップダイオード チップツェナーダイオード チップダイオード ダイオード チップダイオード チップダイオード チップダイオード チップダイオード チップダイオード ダイオード ダイオード チップダイオード ツェナーダイオード ダイオード セラミック管ヒューズ フューズホルダー F FAX AC 電源基板 (FAX AC power supply unit)…200V series NO. ! 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 PARTS CODE 0FT33529090// 0FT33684207// 0FT23642925// 0FT33529090// 0FT33529090// 0FT33529090// 0FT33258410// 0FT33262132// 0FT33197209// 0FT33262132// 0FT23473074// 0FT23095657// 0FT23287696// 0FT23287637// 0FT23287629// 0FT23095657// 0FT23095657// 0FT33570147// 0FT33530617// 0FT23563138// 0FT23563138// 0FT23538974// 0FT23462269// 0FT23414892// 0FT23563359// 0FT23562832// 0FT23562832// 0FT23562727// 0FT23562727// 0FT23624293// 0FT23462269// 0FT23728161// 0FT23563324// 0FT23562379// 0FT23557111// 0FT23536106// 0FT23538982// 0FT33570198// 0FT33570198// 0FT23462234// 0FT23462293// 0FT23690482// 0FT23663914// 0FT23462226// 0FT23462234// 0FT23625591// 0FT23538923// 0FT23462250// 0FT23462250// 0FT23625591// 0FT23462234// 0FT23463362// 0FT23578194// 0FT23462234// 0FT23415740// 0FT23538850// 0FT23462269// 0FT23415651// 0FT23752267// 0FT23546047// 0FT23462226// 0FT23462250// 0FT23538850// 0FT23462250// 0FT23538885// 0FT23538915// 0FT23415430// 0FT23562379// 0FT23484661// 0FT33005385// 0FT23415600// 0FT33008015// 0FT23736903// 0FT33638361// 0FT33638361// 0FT33568266// 0FT23644634// 0FT33684193// PRICE RANK Ex. Ja. AP EQ BA FX AK DX AP EQ AP EQ AP EQ AU EZ AP EQ BA FX AP EQ AW FG AF DS AP EQ AP EQ AK DX AF DS AF DS AD DJ AD DJ AD DJ AD DJ AD DJ AD DJ AF DS AD DJ AD DJ AD DJ AD DJ AD DJ AD DJ AD DJ AD DJ AC DJ AD DJ AD DJ AD DJ AD DJ AF DS AF DS AD DJ AD DJ AD DJ AD DJ AD DJ AD DJ AD DJ AD DJ AD DJ AD DJ AD DJ AD DJ AD DJ AD DJ AD DJ AF DS AD DJ AD DJ AF DS AD DJ AD DJ AD DJ AD DJ AD DJ AD DJ AD DJ AD DJ AF DS AD DJ AD DJ AD DJ AF DS AW FG AX FG BC GJ BC GJ BA FX AK DX BF GN NEW MARK PART RANK C B B C C C B B B B B B B B B B B C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C B B B B B B B DESCRIPTION Terminal(85163 #250) Reactle(LF-4ZA-E183) Reactor(TG0113MADS SK) Terminal(85163 #250) Terminal(85163 #250) Terminal(85163 #250) Surge absorber(ERZV10D681) Photo coupler(PC123FY2) Photo coupler(TLP747J(D4) 0884) Photo coupler(PC123FY2) Transistor(2SC4304) Transistor(2SC1815-Y:GR TPE2) Transistor(2SC3225 TPE6) Transistor(2SA1020-O:Y TPE6) Transistor(2SA1015-Y TPE2) Transistor(2SC1815-Y:GR TPE2) Transistor(2SC1815-Y:GR TPE2) Resistor(RSPF12TS 680 K OHMJ (1RL=2000)) Resistor(RSPF2B 220K OHMJ) Resistor(RSMF1SL 100K OHMJ) Resistor(RSMF1SL 100K OHMJ) Resistor(RK73K2ATD 2.7K OHMJ(1RL=5000)) Resistor(RK73K2ATD 10K OHMJ(1RL=5000)) Resistor(RDF14 TS 820 OHMJ) Resistor(RSMF2SL 220 OHMJ) Resistor(RSMF1SL 4.7 OHMJ) Resistor(RSMF1SL 4.7 OHMJ) Resistor(RSMF12SL 100K OHMJ) Resistor(RSMF12SL 100K OHMJ) Resistor(RK73K2ATD 27K OHMJ(1RL=5000)) Resistor(RK73K2ATD 10K OHMJ(1RL=5000)) Resistor(RSMF12TS 22 OHMJ) Resistor(RSMF2SL 100 OHMJ) Resistor(RSMF12SL 1 OHMJ) Resistor(RK73K2ATD 220 OHMJ(1RL=5000)) Resistor(RK73K2ATD 1.5K OHMJ(1RL=5000)) Resistor(RK73K2ATD 47 OHMJ(1RL=5000)) Resistor(RSPF1B 330 K OHMJ ストレート ) Resistor(RSPF1B 330 K OHMJ ストレート ) Resistor(RK73K2ATD 1K OHMJ(1RL=5000)) Resistor(RK73K2ATD 560 OHMJ(1RL=5000)) Resistor(RSMF12TS 10 OHMJ) Resistor(RK73K2ATD 5.1KΩJ) Resistor(RK73K2ATD 470 OHMJ(1RL=5000)) Resistor(RK73K2ATD 1K OHMJ (1RL=5000)) Resistor(RK73K2ATD 1.8K OHMJ (1RL=5000)) Resistor(RK73K2ATD 3.9K OHMJ (1RL=5000)) Resistor(RK73K2ATD 2.2K OHMJ (1RL=5000)) Resistor(RK73K2ATD 2.2K OHMJ (1RL=5000)) Resistor(RK73K2ATD 1.8K OHMJ (1RL=5000&) Resistor(RK73K2ATD 1K OHMJ (1RL=5000)) Resistor(RK73K2ATD 180 OHMJ (1RL=5000)) Resistor(RK73K2ATD 22 OHMJ (1RL=5000)) Resistor(RK73K2ATD 1K OHMJ (1RL=5000)) Resistor(RDMF14 TS 15K OHMJ) Resistor(RK73K2ATD 4.7K OHMJ(1RL=5000)) Resistor(RK73K2ATD 10K OHMJ (1RL=5000)) Resistor(RDMF14 TS 4.7K OHMJ) Resistor(RSMF12TS 2.2 OHMJ) Resistor(RK73K2ATD 100K OHMJ(1RL=5000)) Resistor(RK73K2ATD 470 OHMJ(1RL=5000)) Resistor(RK73K2ATD 2.2K OHMJ (1RL=5000)) Resistor(RK73K2ATD 4.7K OHMJ (1RL=5000)) Resistor(RK73K2ATD 2.2K OHMJ (1RL=5000)) Resistor(RK73K2ATD 100 OHMJ (1RL=5000)) Resistor(RK73K2ATD 5.6K OHMJ (1RL=5000)) Resistor(RDMF14 TS 100 OHMJ) Resistor(RSMF12SL 1 OHMJ) Resistor(RSMF12TS 0.22 OHMJ) Resistor(RSMF12TS 4.7K OHMJ) Resistor(RDMF14 TS 1.8K OHMJ) Rectifier(D2SB60) Rectifier(SF10SC4) Relay(G2R-1A-E-TV8-ASI DC12V) Relay(G2R-1A-E-TV8-ASI DC12V) Relay(SDT-S-112LMR) Variable resistor(EVM-4LGA00B13) Transformer(CXM41100-507) – 15 – [L] [L1] [L4] [L1F] [N] [N1F] [NR1] [PC1] [PC2] [PC3] [Q1] [Q2] [Q3] [Q4] [Q6] [Q7] [Q12] [R1] [R2] [R4] [R5] [R7] [R8] [R9] [R10] [R11] [R12] [R13] [R14] [R16] [R17] [R18] [R19] [R20] [R21] [R22] [R23] [R24] [R25] [R30] [R31] [R32] [R33] [R34] [R35] [R36] [R37] [R38] [R39] [R40] [R41] [R42] [R43] [R44] [R45] [R46] [R48] [R49] [R50] [R63] [R65] [R66] [R67] [R68] [R69] [R71] [R82] [R83] [R84] [R87] [R89] [RC1] [RC2] [RL1] [RL2] [RL3] [RV1] [T1] ファストン端子 リアクトル リアクトル ファストン端子 ファストン端子 ファストン端子 サージアブソーバー フォトカプラ フォトカプラ フォトカプラ トランジスタ トランジスタ トランジスタ トランジスタ トランジスタ トランジスタ トランジスタ 電力形被膜抵抗器 電力形被膜抵抗器 酸化金属被膜抵抗器 酸化金属被膜抵抗器 チップ抵抗器 チップ抵抗器 カーボン抵抗器 酸化金属被膜抵抗器 酸化金属被膜抵抗器 酸化金属被膜抵抗器 酸化金属被膜抵抗器 酸化金属被膜抵抗器 チップ抵抗器 チップ抵抗器 酸化金属被膜抵抗器 酸化金属被膜抵抗器 酸化金属被膜抵抗器 チップ抵抗器 チップ抵抗器 チップ抵抗器 電力形被膜抵抗器 電力形被膜抵抗器 チップ抵抗器 チップ抵抗器 酸化金属被膜抵抗器 チップ抵抗器 チップ抵抗器 チップ抵抗器 チップ抵抗器 チップ抵抗器 チップ抵抗器 チップ抵抗器 チップ抵抗器 チップ抵抗器 チップ抵抗器 チップ抵抗器 チップ抵抗器 カーボン抵抗器 チップ抵抗器 チップ抵抗器 カーボン抵抗器 酸化金属被膜抵抗器 チップ抵抗器 チップ抵抗器 チップ抵抗器 チップ抵抗器 チップ抵抗器 チップ抵抗器 チップ抵抗器 カーボン抵抗器 酸化金属被膜抵抗器 酸化金属被膜抵抗器 酸化金属被膜抵抗器 カーボン抵抗器 整流器 整流器 リレー リレー リレー 可変抵抗器 変圧器 F FAX AC 電源基板 (FAX AC power supply unit)…200V series NO. ! ! PARTS CODE 0FT35866337// 0FT33673027// 0FT23671666// 0FT23665429// 0FT33603762// 0FT33331673// 0FT23314081// 0FT23379450// 0FT23379450// 0FT23432963// 0FT33461429// 0FT33461437// 0FT33525117// 0FT33693842// 0FT33213581// 0FT33676877// 0FT23423816// 0FT33730969// (Unit) 901 RDENC0031FCZZ 167 168 169 170 171 172 173 174 175 176 178 179 180 181 182 183 184 185 PRICE RANK Ex. Ja. BF GN AU EZ AU EZ AU EZ BB GD AZ FQ AU EZ AU EZ AU EZ AC DJ AU EZ BA FX AP EQ BA FX AP EQ AU EZ AC DJ AZ FQ CA TV NEW MARK PART RANK B B B B B B B B B C C C C C C C C B E DESCRIPTION Transformer(EXT43441-009A) Thermister(SCK-104) IC(UPC78M12AHF) IC(UPC78M24AHF) IC(PQ12RF1) Regurator(UPC29M33HF) IC(UPC393C) IC(AN1431T-TA) IC(AN1431T-TA) Screw(M3X10 S NP3 W.SW) Angle(TC-92 30X36X1T) Fin(AL1 30X30X1.5T) Label(1RL 2000MAI) Fin(AL1 70X30X1.5T) Fin(ST-S 20G PT1 15×35×10) Terminal(C1100R-1/4H SNPB14.7X6.8 ) Screw(M3X8 S NP3 W・SW) Arrestor(RA-102M-C6-Y) FAX AC power supply unit – 16 – [T2] [TH1] [Z1] [Z2] [Z3] [Z4] [Z6] [Z7] [Z8] [6] [1] [2] [7] [3] [8] [9] [10] [SQ1,SQ2] 変圧器 サーミスタ IC IC IC IC レギュレータ IC IC IC 小ワッシャ W セムスネジ 金具 フィン ラベル フィン フィン FG 端子 小ワッシャ W セムスネジ アレスタ [200V serise] FAX AC 電源ユニット ■ 索引 (Index) PARTS CODE [C] CPLTM5788FCE9 CPLTM5788FCF0 CPLTM5788FCF2 CPWBN1619FCE1 " CPWBN1619FCE2 " CPWBN1620FCE1 " CPWBX1618FCE1 " CPWBX1640FCE1 " [D] DHAI-3027FCAZ DHAI-3204FC11 DHAI-3206FC11 DHAI-3207FC11 DHAI-3297FCZZ DHAI-3298FCZZ DHAI-3418FCZZ DHAI-3444FCZZ DHAI-3446FCAZ DUNT-7136FCA1 [G] GCAB-0946FCZ2 GCAB-0946FCZ3 GCAB-0947FCZZ [L] LBSHZ1001ACZZ LBSHZ2050SCZZ LFIX-0560FCZZ LFIX-0567FCZZ LHLDW1499FCZZ LHLDW2087SCZZ LHLDZ1493FCZZ LHLDZ1494FCZZ LPLTM5787FCZZ LPLTM5788FCZZ LPLTM5789FCZZ LPLTM5892FCZZ LPLTM5893FCZZ LSUPP0076FCZZ LSUPP0118FCZZ LX-BZ0140FCZZ LX-BZ0938FCZZ LX-WZ0443FCZZ [P] PCOVP1564FCZZ PSHEZ4879FCZZ PSHEZ4933FCZZ [Q] QCNCM1069ACZZ QCNCM1156FCZZ QCNCM7014SC0B QCNCM7014SC0C QCNCW1155FCZZ " " " " QCNCW1180FCZZ QCNW-0178FCZZ QCNW-0210FCZZ QCNW-7252HSZZ QCNW-7253HSZZ QCNW-7254HSZZ QJAKT0001FCZZ " " " QJAKT0002FCZZ " QJAKT0004QSZZ " QSOCD0081FCZZ QSOCN0082FCZZ " PARTS CODE NO. PRICE R. NEW P/R Ex. Ja. 1- 501 1- 501 1- 501 1- 34 3- 901 1- 34 4- 901 1- 34 5- 901 1- 36 7- 901 2- 7 8- 901 BR LX BR LX CB TX BQ LP BQ LP BM HV BM HV BQ LP BQ LP CC TZ CC TZ BL HL BL HL 2111111121- 10 26 39 25 5 5 5 26 10 31 BF AM AG AG AP AP AR AN BA AN GN EG DX DX EQ EQ EQ EQ FX EQ C C C C C C C C C E 1- 27 1- 27 1- 2 AZ AZ AT FQ FQ EZ D D D 111111111111111211- 12 16 23 4 19 41 6 3 35 14 30 22 28 20 18 15 43 45 AB AB AF AD AC AA AF AF AQ AP AF AD AQ AA AB AB AC AB DD DD DS DJ DJ DD DS DS EQ EQ DS DJ EQ DD DJ DD DD DD C C C C C C C C C C C C C C C C C C 1- 1 1- 33 1- 24 AF AH AD DS DX DJ C C C 73773456782122234563456378- AD AD AD AA AE AE AE AE AE AN BA AE DD DJ DJ DD DJ DJ DJ DJ DJ EG FX DJ AD AD AD AD AE AE AE AE AL AP AP DJ DJ DJ DJ DJ DJ DJ DJ EB EQ EQ C C C C C C C C C C C C C C C C C C C C C C C C C C 1 1 2 3 2 1 1 1 4 1 9 37 10 10 10 3 2 2 2 4 3 3 3 5 6 2 N N N N N N N N N N N N N E E E E E E E E E E E E E QSOCZ0092FCZZ QSOCZ0094FCPZ QSW-C9295QCZZ [R] RADPA0001QSZZ RADPA0002TSZZ RC-EZ0362FCPZ " " " RC-EZ0363FCPZ " RC-EZ0365FCPZ " " " RC-EZ0366FCPZ " " " RC-EZ0369FCPZ " " " RCILZ0008QSZZ " RCILZ0009QSZZ RCILZ0089FCZZ " " " RC-KZ0008QCZZ " " " " " RC-KZ102BRC2H RCORF0046FCZZ RCORF1072ACZZ RCRSP0069FCZZ RDENC0004FCZ1 " RDENC0031FCZZ " RFILN0047FCZZ " " RFILN2011SCZZ " " " RFILZ1042LCZZ RMPTR4470ACZZ RRLYD1211QCZZ " RRLYD3211QCZZ RRLYZ2413QCZZ " RR-WZ0418FCZZ " RTRNI2142SCZZ " RTRNP0534FCZZ RTRNP2105SCZZ RTRNZ0008QSZZ RTRNZ0009QSZZ RTRNZ2140SCZZ " [S] SPAK-546ECCZZ " SPAKA5824FCZZ SPAKA6150FCZZ SPAKA6151FCZZ SSAKA0006UCZZ SSAKA3001CCZZ SSAKA3640QCZZ [T] TCADZ1696FCZZ TCADZ1697FCZZ – 17 – NO. PRICE R. NEW P/R Ex. Ja. 8- 3 7- 7 1- 15 AR AL AL 2- 19 2- 19 3- 18 4- 16 5- 4 6- 4 3- 19 4- 17 3- 20 4- 18 5- 6 6- 6 3- 21 4- 19 5- 7 6- 7 3- 23 4- 20 5- 10 6- 10 5- 13 6- 12 5- 14 3- 6 4- 4 5- 15 6- 13 3- 7 4- 5 5- 11 6- 11 7- 9 8- 4 4- 6 2- 17 7- 10 7- 11 1- 11 9- 901 10- 901 1- 11 3- 8 4- 7 7- 14 3- 9 4- 8 5- 16 6- 14 7- 15 7- 16 3- 10 4- 9 3- 11 5- 17 6- 15 3- 13 4- 11 5- 18 6- 16 3- 14 3- 15 4- 12 4- 13 5- 19 6- 17 EQ EG EB C C B AQ EQ B B C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C B E E E E C C C C C C C C B B B B B B B B B B B B B B B B AC AC AC AC AC AC AB AB AB AB AB AB AB AB AB AB AB AB AD AD AF AG AG AG AG AB AB AB AB AB AB AC AH AB AG BZ BZ CA CA AC AC AC AC AC AC AC AC AB AH AH AM AX AX AF AF AN AN AT AP AT AQ AN AN DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DJ DJ DS DX DX DX DX DD DD DD DD DD DD DD DX DJ DS TR TR TV TV DJ DJ DJ DJ DJ DJ DJ DJ DD DX DX EG FG FG DS DS EQ EQ EZ EQ EZ EQ EQ EQ 22222222- 16 8 12 1 3 11 18 2 AB AB AF AP AK AA AA AB DD DD DS EQ EB DD DD DD 22- 4 4 AH AK DX EB N N N N N N N N N N N N N N N N N N D D D D D D D D N N D D PARTS CODE TINSE2786FCZZ TINSE2787GHZZ TINSE2791FCZZ TINSF2789GHZZ TINSG2788GHZZ TINSJ2785FCZZ TINSW2790GHZZ [V] VCCCCZ1EH151J VCCCCZ1EH221J " " " VCCCCZ1HH100D VCCCCZ1HH101J " " VCEASM1CM106M " VCEASM1EM107M VCFYDA1HA104J VCFYDA1HA105J " VCFYDA1HA334J VCFYDA1HA474J VCFYJU2AA824K VCFYJU2EA105K " " VCFYJU2EA474K VCFYJU2EA824K " VCFYJU2GA473K VCKYCZ1AB104K " VCKYCZ1AB273K VCKYCZ1AB333K VCKYCZ1AB473K " VCKYCZ1AB683K " " VCKYCZ1AF224Z VCKYCZ1CB103K VCKYCZ1CF104Z " " " VCKYCZ1EB472K VCKYCZ1HB102K " " VCKYCZ1HB182K VCKYCZ1HB222K " VCKYCZ1HB331K " VCKYCZ1HB332K " VCKYCZ1HB471K " " " VCKYCZ1HB681K " VCKYCZ1HB821K VCQYNA1HM223K VHD10DDA40+-1 " VHD1SS133//-1 " " " VHD1SS355//-1 " " VHDRB751V40-1 " VHDS1ZB60//-1 " " PRICE R. NEW P/R Ex. Ja. NO. 2222222- 5 5 5 5 5 5 5 7345673477877376533456563565356456775678734753756563467675334345656737345- 17 16 14 20 18 18 17 15 19 20 5 21 24 25 25 19 21 26 27 21 22 20 23 21 28 24 22 25 29 26 23 22 27 24 26 27 28 25 28 6 29 30 23 30 29 31 31 30 26 31 27 32 24 28 32 29 33 32 33 34 25 35 26 34 31 35 32 34 36 35 37 27 33 BD GN BE GN BD GJ AA AB AB AB AB AA AA AA AA AB AB AD AC AE AE AC AD AF AE AE AE AD AE AE AC AC AC AB AB AB AB AB AB AB AC AA AB AB AB AB AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AC AA AB AB AA AA AA AA AB AB AB AD AD AC AC AC DD DD DD DD DD DD DD DD DD DD DD DJ DD DJ DJ DJ DJ DS DS DS DS DJ DJ DJ DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DJ DJ DD DD DD DD DJ DJ DJ DJ DJ DJ DJ DJ N N N N N N N N PARTS CODE VHDS1ZB60//-1 VHEHZS2C1//-1 " " " VHEMTZJ30B/-1 " VHEMTZJ33B+-1 " VHEMTZJ39B/-1 " " VHEMTZJ4R7B-1 " " " VHEMTZJ6R8B-1 " VHEMTZJ8.2B-1 " VHI28F082L27F VHI28F082L28F VHI28F082L31F VHI28F082L32F VHI74LCX04FT1 VHI74LCX74T-1 VHIBU4066BCF1 " " " VHICAT24W02-1 VHILHF80J01-1 VHILM1117M3-1 VHIMAX3225E-1 " VHIN195006E-1 VHINJM2113M-1 VHINJM3414M-1 " VHINJM4558MF1 " " " " VHINJM78L05A1 VHIPST591CMT1 VHISD4M16L1-1 VHISH770910-1 VHIT4052BFF-1 VHITD62503F/VHITHS56F//-1 " " VHIUPD659461C VHPPC814X1+-1 " VHPSLR322VC3F VHPTLP621-1GB " VHPTLP627//-1 " VHVDSS301L/-1 " VHVDSS-401M// " " " VHVICPS1.2/-1 VHVTNR5V101K/ " " VHVTNR5V471K/ " VRD-HT2EY100J " " " VRD-HT2EY103J " VRD-HT2EY104J " D D D D D D D C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C B B B B B B B B B B B B B B – 18 – NO. PRICE R. NEW P/R Ex. Ja. 634565634356345656341111773456787787756345677777773567347565656345683453434565634- AC AB AB AB AB AB AB AC AC AC AC AC AC AC AC AC AC AC AB AB BA BA BA AY AE AG AD AD AD AD AG AX AH AT AT BK AG AF AF AE AE AE AE AE AD AE AZ BH AG AG AS AS AS BA AD AD AC AF AF AH AH AF AF AH AH AH AH AF AD AD AD AD AD AA AA AA AA AA AA AA AA 30 38 28 36 33 37 34 39 29 40 38 35 41 30 39 36 40 37 42 31 38 38 38 38 38 44 43 32 41 38 41 7 45 46 8 48 49 42 39 44 33 43 40 50 51 53 54 55 43 57 45 44 41 60 46 34 61 45 42 46 43 48 45 48 36 47 44 9 49 37 49 50 38 51 39 50 47 51 48 52 40 DJ DJ DJ DJ DJ DJ DJ DJ DJ DJ DJ DJ DJ DJ DJ DJ DJ DJ DJ DJ FX FX FX FQ DS DS DJ DJ DJ DJ DS FG DX EZ EZ HC DS DX DX DJ DJ DJ DJ DJ DJ DS FX GX DX DX EZ EZ EZ FX DJ DJ DJ DX DX EB EB DS DS DX DX DX DX DS DJ DJ DJ DJ DJ DD DD DD DD DD DD DD DD N N N N N B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B C C C C C C C C PARTS CODE VRD-HT2EY113J VRD-HT2EY120J VRD-HT2EY123J VRD-HT2EY124J " VRD-HT2EY150J " VRD-HT2EY163J VRD-HT2EY181J " VRD-HT2EY183J " VRD-HT2EY202J VRD-HT2EY224J " VRD-HT2EY300J " VRD-HT2EY301J VRD-HT2EY302J VRD-HT2EY303J " VRD-HT2EY332J " VRD-HT2EY471J VRD-HT2EY472J VRD-HT2EY474J VRD-HT2EY513J " " VRD-HT2EY751J VRD-HT2EY910J " VRS-CZ1JD000J " " " " " VRS-CZ1JD101J " VRS-CZ1JD102J " " VRS-CZ1JD103J " " " " VRS-CZ1JD104J " " " VRS-CZ1JD112J VRS-CZ1JD113F " VRS-CZ1JD113J " " " VRS-CZ1JD122J " VRS-CZ1JD123J VRS-CZ1JD151J VRS-CZ1JD153J " " " VRS-CZ1JD154F VRS-CZ1JD183J " " VRS-CZ1JD203J " " " VRS-CZ1JD220J VRS-CZ1JD222J " VRS-CZ1JD223F " VRS-CZ1JD223J NO. PRICE R. NEW P/R Ex. Ja. 555345665634434346434565354567343456787834734567356763434563773345673473567737343- AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA 52 53 54 53 41 55 49 50 56 51 54 42 43 55 44 56 45 52 46 57 47 57 53 58 58 59 48 60 54 62 59 49 60 50 61 55 63 10 64 11 61 51 65 62 52 62 56 66 63 63 57 67 58 64 53 65 54 64 59 66 68 69 67 68 55 65 60 70 69 56 71 70 66 61 72 73 71 74 72 57 73 DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C PARTS CODE VRS-CZ1JD223J " " VRS-CZ1JD243J " " VRS-CZ1JD271J " VRS-CZ1JD272J " " VRS-CZ1JD273J " " " VRS-CZ1JD301J VRS-CZ1JD302J VRS-CZ1JD303J " VRS-CZ1JD330J VRS-CZ1JD331J VRS-CZ1JD332J " VRS-CZ1JD333J " " VRS-CZ1JD363F VRS-CZ1JD363J " " VRS-CZ1JD364J VRS-CZ1JD392J VRS-CZ1JD393J " VRS-CZ1JD431J VRS-CZ1JD470J VRS-CZ1JD471J " VRS-CZ1JD472J " " " " VRS-CZ1JD473J VRS-CZ1JD510J VRS-CZ1JD512F " VRS-CZ1JD513J VRS-CZ1JD560J VRS-CZ1JD561J VRS-CZ1JD563F VRS-CZ1JD563J VRS-CZ1JD621F " VRS-CZ1JD621J " VRS-CZ1JD682J VRS-CZ1JD683J " VRS-CZ1JD821J VRS-CZ1JD822J VRS-CZ1JD912J " VRS-CZ1JD913J VRS-RA3AA153J VRS-RA3AA202J VRS-RA3AA472J VRS-VV3LB821J VS2SA1577Q/RC VS2SA1807-P-1 " " VS2SA821S//-1 VS2SC2412KS-1 " " " VS2SC3415-P-1 " VS2SD1266A0-1 " – 19 – NO. PRICE R. NEW P/R Ex. Ja. 456356353473457575673345677357433767673567877347757634457373367743357345534563434- AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AB AA AA AA AA AA AA AA AF AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AB AB AB AC AC AE AE AE AC AB AB AB AB AP AP AF AF 58 67 62 74 68 63 75 69 76 59 75 77 60 70 76 71 77 72 64 78 78 79 61 73 65 79 80 80 74 81 62 81 82 82 66 83 67 84 83 75 68 85 12 86 87 84 64 88 89 76 90 69 86 66 67 77 91 87 92 88 89 70 94 95 68 90 91 80 96 92 69 83 84 93 70 85 75 94 71 95 72 DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DS DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DS DS DS DJ DD DD DD DD EQ EQ DS DS N N C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C B B B B B B B B B B B B B PARTS CODE VS2SD592A//-1 VS2SD592A-S-1 " VSDTA114EUA-1 VSDTC143ZKA-1 " " " VSDTC143ZUA-1 [X] XBBS740P06000 XBPS726P08000 " XEBS730P10000 XEBS730P12000 XHBS730P06000 XHBS740P06000 [0] 0FT14365100// 0FT23040224// 0FT23042251// 0FT23075095// " 0FT23095657// " " " " " " 0FT23124819// 0FT23124827// 0FT23194310// 0FT23204782// 0FT23204790// " 0FT23241823// " 0FT23259382// 0FT23259420// 0FT23259447// 0FT23259498// " " 0FT23287629// " 0FT23287637// " 0FT23287696// " 0FT23287823// 0FT23314081// " 0FT23319431// " " " 0FT23326101// 0FT23329089// " 0FT23355772// 0FT23379450// " " " 0FT23394395// 0FT23414892// " 0FT23415341// 0FT23415430// " 0FT23415570// " " " " " 0FT23415600// " 0FT23415643// 0FT23415651// NO. PRICE R. NEW P/R Ex. Ja. 734734567- 97 96 73 98 97 74 82 74 99 AE AK AK AC AC AC AC AC AC DJ DX DX DJ DJ DJ DJ DJ DJ 2121111- 14 46 13 8 7 13 32 AA AA AA AC AC AC AA DD DD DD DD DD DD DD 10- 58 9- 1 9- 2 10- 45 9- 3 10- 103 10- 104 10- 99 9- 96 9- 97 9- 98 9- 99 9- 100 9- 101 9- 4 9- 102 9- 103 9- 104 10- 66 9- 105 9- 106 9- 107 9- 108 9- 109 9- 110 9- 111 10- 102 9- 112 10- 101 9- 113 10- 100 9- 114 9- 115 10- 173 9- 5 10- 81 10- 82 9- 116 9- 117 9- 118 9- 119 9- 120 10- 84 10- 174 10- 175 9- 121 9- 122 9- 123 10- 112 9- 124 9- 125 10- 155 9- 126 10- 3 10- 5 10- 6 9- 127 9- 128 9- 129 10- 159 9- 130 9- 131 10- 146 AK AD AP AP AP AF AF AF AF AF AF AF AK AF AU AP AP AP AP AP AP AP AK AK AK AK AK AK AP AP AP AP AK AU AU AF AF AF AF AU AK AK AF AU AU AU AU AU AF AF AF AF AF AF AF AF AF AF AF AF AF AF AF DX DJ EQ EQ EQ DS DS DS DS DS DS DS DX DS EZ EQ EQ EQ EQ EQ EQ EQ DX DX DX DX DX DX EQ EQ EQ EQ DX EZ EZ DS DS DS DS EZ DX DX DS EZ EZ EZ EZ EZ DS DS DS DS DS DS DS DS DS DS DS DS DS DS DS PARTS CODE 0FT23415651// 0FT23415716// 0FT23415740// " 0FT23415899// 0FT23423816// " 0FT23429199// " 0FT23432963// " 0FT23462226// " " " 0FT23462234// " " " " " " " 0FT23462250// " " " " " " " " 0FT23462269// " " " " " 0FT23462293// " 0FT23463362// " 0FT23473074// 0FT23484661// " 0FT23485706// 0FT23486796// 0FT23486850// " " " 0FT23536106// " " " " 0FT23538850// " " " 0FT23538885// " 0FT23538915// " 0FT23538923// " 0FT23538974// " 0FT23538982// " 0FT23541509// " 0FT23543641// " 0FT23546047// " " 0FT23549119// " " " B B B B B B B B B N N N N N N N C C C C C C C B C C C C B B B B B B B C C B C C C B B C C C C C C B B B B B B C B B B B B B C C C B B B B B C C C C C C C C C C C C C C C C – 20 – NO. 9- 132 9- 133 10- 143 9- 134 9- 135 10- 184 9- 7 10- 59 9- 136 10- 176 9- 8 10- 132 10- 149 9- 33 9- 34 10- 128 10- 133 10- 139 10- 142 9- 35 9- 36 9- 37 9- 38 10- 136 10- 137 10- 150 10- 152 9- 39 9- 40 9- 41 9- 42 9- 43 10- 111 10- 119 10- 145 9- 44 9- 45 9- 46 10- 129 9- 47 10- 140 9- 48 10- 98 10- 157 9- 137 9- 9 9- 138 10- 18 10- 22 9- 139 9- 140 10- 124 10- 4 9- 49 9- 50 9- 51 10- 144 10- 151 9- 52 9- 53 10- 153 9- 54 10- 154 9- 55 10- 135 9- 56 10- 110 9- 57 10- 125 9- 58 10- 56 9- 59 10- 87 9- 141 10- 148 9- 60 9- 61 10- 16 10- 19 10- 20 10- 40 PRICE R. NEW P/R Ex. Ja. AF AF AF AF AF AC AC AK AK AC AC AD AD AD AD AD AD AD AD AD AD AD AD AD AD AD AD AD AD AD AD AD AD AD AD AD AD AD AD AD AD AD AW AD AD AK AK AK AK AK AK AD AD AD AD AD AD AD AD AD AD AD AD AD AD AD AD AD AD AD AK AK AK AK AD AD AD AF AF AF AF DS DS DS DS DS DJ DJ DX DX DJ DJ DJ DJ DJ DJ DJ DJ DJ DJ DJ DJ DJ DJ DJ DJ DJ DJ DJ DJ DJ DJ DJ DJ DJ DJ DJ DJ DJ DJ DJ DJ DJ FG DJ DJ DX DX DX DX DX DX DJ DJ DJ DJ DJ DJ DJ DJ DJ DJ DJ DJ DJ DJ DJ DJ DJ DJ DJ DX DX DX DX DJ DJ DJ DS DS DS DS C C C C C C C B B C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C B C C C C C C C C C C C C C C C C C C C C C C C C C C C B B C C C C C C C C C PARTS CODE NO. 0FT23549119// " " " " " " " " 0FT23551148// " 0FT23551377// " 0FT23557111// " 0FT23559467// 0FT23562328// 0FT23562379// " " " 0FT23562549// 0FT23562700// " 0FT23562727// " " 0FT23562816// " 0FT23562832// " 0FT23562859// 0FT23563103// " 0FT23563138// " 0FT23563324// " " 0FT23563359// 0FT23565505// 0FT23578194// " " 0FT23581330// " " " " " 0FT23583309// " 0FT23598470// " 0FT23598977// " 0FT23605507// " " " " " " 0FT23610810// " " " " " " " " " " " " " 0FT23611329// 0FT23617904// " 0FT23624285// 10- 42 10- 43 9- 62 9- 63 9- 64 9- 65 9- 66 9- 67 9- 68 10- 50 9- 69 10- 79 9- 70 10- 123 9- 71 9- 10 9- 11 10- 122 10- 156 9- 12 9- 13 9- 14 9- 15 9- 16 10- 116 10- 117 9- 17 9- 18 9- 19 10- 114 10- 115 9- 20 9- 21 9- 22 10- 108 10- 109 10- 121 9- 23 9- 24 10- 113 9- 72 10- 141 9- 73 9- 74 10- 1 10- 2 10- 37 9- 75 9- 76 9- 77 10- 69 9- 78 10- 73 9- 79 10- 46 9- 25 10- 52 10- 54 10- 70 9- 142 9- 143 9- 144 9- 145 10- 53 10- 60 10- 61 10- 62 10- 63 10- 75 9- 146 9- 147 9- 148 9- 149 9- 150 9- 151 9- 152 9- 153 9- 26 10- 48 10- 49 9- 154 PRICE R. NEW P/R Ex. Ja. AF AF AF AF AF AF AF AF AF AK AK AK AK AD AD AR AD AD AD AD AD AD AD AD AD AD AD AC AC AD AD AD AD AD AD AD AC AC AC AD AD AD AD AD AD AD AD AD AD AD AG AG AG AG AK AK AK AK AK AK AK AK AK AK AK AK AK AK AK AK AK AK AK AK AK AK AK AK AK AK AK DS DS DS DS DS DS DS DS DS DX DX DX DX DJ DJ EQ DJ DJ DJ DJ DJ DJ DJ DJ DJ DJ DJ DJ DJ DJ DJ DJ DJ DJ DJ DJ DJ DJ DJ DJ DJ DJ DJ DJ DJ DJ DJ DJ DJ DJ DX DX DX DX DX DX DX DX DX DX DX DX DX DX DX DX DX DX DX DX DX DX DX DX DX DX DX DX DX DX DX C C C C C C C C C B B B B C C B C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C B B B B C C B B B B B B B B B B B B B B B B B B B B B C B B B PARTS CODE 0FT23624293// " 0FT23625591// " " " 0FT23633012// 0FT23642925// " 0FT23644634// " 0FT23663914// " 0FT23665429// " 0FT23671666// " 0FT23690482// " 0FT23697355// 0FT23728161// 0FT23736903// " 0FT23752267// " " 0FT33005385// " 0FT33008015// " 0FT33035349// " 0FT33036442// 0FT33045115// " 0FT33045131// 0FT33055277// 0FT33061730// 0FT33061765// " 0FT33061773// 0FT33061781// 0FT33061811// 0FT33061846// " " 0FT33073380// 0FT33085427// 0FT33113498// 0FT33122675// " " " " " " " " " " " " " " " " " " " " " 0FT33131461// 0FT33146922// 0FT33169744// 0FT33173377// 0FT33186711// 0FT33189184// " 0FT33197209// " 0FT33199031// – 21 – NO. 10- 118 9- 80 10- 134 10- 138 9- 81 9- 82 10- 12 10- 90 9- 27 10- 165 9- 28 10- 131 9- 83 10- 170 9- 29 10- 169 9- 30 10- 130 9- 155 9- 31 10- 120 10- 161 9- 32 10- 147 9- 156 9- 157 10- 158 9- 158 10- 160 9- 168 10- 67 9- 169 9- 159 10- 24 10- 41 10- 26 9- 160 10- 31 10- 23 10- 29 10- 27 10- 25 10- 35 10- 21 10- 36 10- 44 10- 34 9- 170 10- 30 10- 51 10- 55 10- 57 10- 71 10- 72 10- 74 10- 76 10- 77 10- 78 10- 80 10- 83 9- 84 9- 85 9- 86 9- 87 9- 88 9- 89 9- 90 9- 91 9- 92 9- 93 9- 94 10- 85 9- 171 10- 38 9- 172 9- 161 10- 28 9- 95 10- 96 9- 173 9- 174 PRICE R. NEW P/R Ex. Ja. AD AD AD AD AD AD AH AK AK AK AK AD AD AU AU AU AU AD AD AU AD AX AX AD AD AD AD AD AW AW AK AK AD AK AK AK AK AF AP AP AP AP AK AK AK AK AU AU AK AF AF AF AF AF AF AF AF AF AF AF AF AF AF AF AF AF AF AF AF AF AF AF AK AP BA AR AD AD BA BA AW DJ DJ DJ DJ DJ DJ DX DX DX DX DX DJ DJ EZ EZ EZ EZ DJ DJ EZ DJ FG FG DJ DJ DJ DJ DJ FG FG DX DX DJ DX DX DX DX DS EQ EQ EQ EQ DX DX DX DX EZ EZ DX DS DS DS DS DS DS DS DS DS DS DS DS DS DS DS DS DS DS DS DS DS DS DS DX EQ FX EQ DJ DJ FX FX FG C C C C C C C B B B B C C B B B B C C B C B B C C C C C B B B B C C C C C C C C C C C C C C C B C B B B B B B B B B B B B B B B B B B B B B B B A C B B C C B B B PARTS CODE NO. 0FT33213581// " 0FT33213786// " " " 0FT33258410// 0FT33262132// " " " 0FT33293976// " 0FT33295049// " 0FT33331673// " 0FT33388799// " 0FT33428332// 0FT33441622// " 0FT33441630// " 0FT33461429// 0FT33461437// 0FT33478232// 0FT33478240// 0FT33509685// 0FT33525117// 0FT33529090// " " " " " " " 0FT33530617// 0FT33552203// 0FT33568266// " 0FT33570120// 0FT33570147// 0FT33570163// " 0FT33570198// " 0FT33603762// " 0FT33603789// 0FT33618557// 0FT33638361// " " " 0FT33673027// 0FT33676877// 0FT33684193// 0FT33684207// 0FT33693842// 0FT33730969// 0FT35863281// 0FT35866337// 10- 182 9- 175 10- 8 10- 9 9- 162 9- 163 10- 94 10- 95 10- 97 9- 176 9- 177 10- 39 9- 178 10- 13 9- 164 10- 172 9- 179 10- 14 9- 165 10- 17 10- 10 9- 180 10- 7 9- 181 10- 178 10- 179 9- 182 10- 11 9- 183 10- 180 10- 88 10- 91 10- 92 10- 93 9- 184 9- 185 9- 186 9- 187 10- 106 9- 166 10- 164 9- 188 9- 167 10- 105 9- 189 9- 190 10- 126 10- 127 10- 171 9- 191 9- 192 10- 86 10- 162 10- 163 9- 193 9- 194 10- 168 10- 183 10- 166 10- 89 10- 181 10- 185 9- 195 10- 167 PRICE R. NEW P/R Ex. Ja. AP AP AK AK AK AK AU AP AP AP AP AF AF AK AK AZ AZ AP AP AK AL AL AP AP AU BA AZ AZ AP AP AP AP AP AP AP AP AP AP AD AD BA BA AD AD AF AF AF AF BB BB BF AP BC BC BC BC AU AU BF BA BA AZ BF BF EQ EQ DX DX DX DX EZ EQ EQ EQ EQ DS DS DX DX FQ FQ EQ EQ DX EB EB EQ EQ EZ FX FQ FQ EQ EQ EQ EQ EQ EQ EQ EQ EQ EQ DJ DJ FX FX DJ DJ DS DS DS DS GD GD GN EQ GJ GJ GJ GJ EZ EZ GN FX FX FQ GN GN PARTS CODE C C C C C C B B B B B C C C C B B C C C C C C C C C C C C C C C C C C C C C C C B B C C C C C C B B B A B B B B B C B B C B B B – 22 – NO. PRICE R. NEW P/R Ex. Ja. CAUTION FOR BATTERY REPLACEMENT (Danish) ADVARSEL ! Lithiumbatteri - Eksplosionsfare ved fejlagtig håndtering. Udskiftning må kun ske med batteri af samme fabrikat og type. Levér det brugte batteri tilbage til leverandoren. (English) Caution ! Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to manufacturer's instructions. (Finnish) VAROITUS Paristo voi räjähtää,jos se on virheellisesti asennettu. Vaihda paristo ainoastaan laitevalmistajan suosittelemaan tyyppiin. Hävitä käytetty paristo valmistajan ohjeiden mukaisesti. (French) ATTENTION ll y a danger d'explosion s'il y a remplacement incorrect de la batterie. Remplacer uniquement avec une batterie du même type on d'un type équivalent recommandé par le constructeur. Mettre au rébut les batteries usagées conformément aux instructions du fabricant. (Swedish) VARNING Explosionsfara vid felaktigt batteribyte. Använd samma batterityp eller en ekvivalent typ som rekornmenderas av apparattillverkaren. Kassera använt batteri enligt fabrikantens Instruktion. (German) Achtung Explosionsgefahr bei Verwendung inkorrekter Batterien. Als Ersatzbatterien dürfen nur Batterien vom gleichen Typ oder vom Hersteller empfohlene Batterien verwendet werden. Entsorgung der gebrauchten Batterien nur nach den vom Hersteller angegebenen Anwerisugen. CAUTION FOR BATTERY DISPOSAL (For USA,CANADA) "BATTERY DISPOSAL" THIS PRODUCT CONTAINS A LITHIUM PRIMARY (MANGANESS DIOXIDE) MEMORY BACK-UP BATTERY THAT MUST BE DISPOSED OF PROPERLY. REMOVE THE BATTERY FROM THE PRODUCT AND CONTACT YOUR LOCAL ENVIRONMENTAL AGENCIES FOR INFORMATION ON RECYCLING AND DISPOSAL OPTIONS. "TRAITEMENT DES PILES USAGÉES" CE PRODUIT CONTIENT UNE PILE DE SAUVEGARDE DE MÉMOIRE LITHIUM PRIMAIRE (DIOXYDE DE MANGANESE) QUI DOIT ÊTRE TRAITÉE CORRECTEMENT. ENLEVEZ LA PILE DU PRODUIT ET PRENEZ CONTACT AVEC VOTRE AGENCE ENVIRONNEMENTALE LOCALE POUR DES INFORMATIONS SUR LES MÉTHODES DE RECYCLAGE ET DE TRAITEMENT. – 23 – [00]COVER.fm 2 ページ 2004年10月26日 火曜日 午後3時41分 [00]COVER.fm 3 ページ 2004年10月26日 火曜日 午後3時41分 COPYRIGHT c 2004 BY SHARP CORPORATION All rights reserved. Printed in Japan. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission of the publisher. Trademark acknowledgments Windows and Windows NT are trademarks of Microsoft Corporation in the U.S.A. and other countries. IBM and PC/AT are trademarks of International Business Machines Corporation. PCL is a trademark of Hewlett-Packard Company. Pentium is a registered trademark of Intel Corporation. All other trademarks and copyrights are the property of their respective owners. SHARP CORPORATION Digital Document System Group Quality Enhancement Center Yamatokoriyama, Nara 639-1186, Japan 2004 October Printed in Japan N