Download Coffee Queen CAF'E ELITE User guide
Transcript
CAFÉ ELITE TECHNICAL MANUAL TM_EN Part No.: 1740056_02 CONTENT CAFÉ ELITE CONTENT......................................................................................................................................................... 2 GENERAL............................................................................................................................................................ 4 Introduction...............................................................................................................................................................4 Warnings.....................................................................................................................................................................4 Precautions.................................................................................................................................................................4 Intended use...............................................................................................................................................................4 Facts & weight............................................................................................................................................................5 OVERVIEW OF COMPONENTS......................................................................................................... 6 Front exterior............................................................................................................................................................6 Front interior of Elite II...........................................................................................................................................7 Front interior of Elite III..........................................................................................................................................8 Front interior of Elite IV..........................................................................................................................................9 Membrane switch navigation............................................................................................................................... 10 Technical service card........................................................................................................................................... 11 INSTALLATION AND START-UP...................................................................................................... 12 Positioning............................................................................................................................................................... 12 Machine startup procedure................................................................................................................................. 12 Fill ingredient canisters......................................................................................................................................... 13 OPERATION.................................................................................................................................................. 14 Dispensing drinks in a cup................................................................................................................................... 14 Dispensing drinks in a jug..................................................................................................................................... 15 CLEANING PROGRAM.......................................................................................................................... 16 Automatic rinsing of the mixing bowl............................................................................................................... 16 Automatic cleaning of dispenser valves............................................................................................................ 17 CLEANING AND CARE......................................................................................................................... 18 Disassemble mixing system................................................................................................................................. 18 Wash these parts................................................................................................................................................... 19 Reassemble mixing system ................................................................................................................................. 19 Failure message....................................................................................................................................................... 20 Storage / Transport................................................................................................................................................ 20 Exterior cleaning.................................................................................................................................................... 21 WARNING MESSAGE SHOWN ON DISPLAY....................................................................... 22 PROGRAMMING........................................................................................................................................ 23 Activate programming with smart card............................................................................................................ 23 Buttons function..................................................................................................................................................... 23 Main menu............................................................................................................................................................... 24 Clean machine........................................................................................................................................................ 25 Counters.................................................................................................................................................................. 26 2 CONTENT CAFÉ ELITE Beverage setup, Strength and Volume................................................................................................................ 28 Beverage setup, Drink Settings and Enable Beverages................................................................................... 29 Beverage setup, Water and Recipe Bank........................................................................................................... 30 Jug setup................................................................................................................................................................... 31 Calibration............................................................................................................................................................... 32 Machine settings..................................................................................................................................................... 33 Language setup and set time & day.................................................................................................................... 34 Hardware Test ........................................................................................................................................................ 35 Factory Reset.......................................................................................................................................................... 37 Expert settings........................................................................................................................................................ 37 Time schedule......................................................................................................................................................... 38 DIMENSION SKETCH.............................................................................................................................. 39 EXPLODED VIEW....................................................................................................................................... 40 Door......................................................................................................................................................................... 40 Machine 1................................................................................................................................................................. 42 Machine 2................................................................................................................................................................. 44 Tank........................................................................................................................................................................... 46 Mixing system and outlet..................................................................................................................................... 48 Canister.................................................................................................................................................................... 50 CIRCUIT DIAGRAM.................................................................................................................................. 52 High Current........................................................................................................................................................... 52 High Current 3-phase........................................................................................................................................... 53 IO-Board Outputs................................................................................................................................................. 54 Ucmerisc and IO-pay board................................................................................................................................ 55 Some important information may appear in textboxes seen below IMPORTANT! INFO. CAUTION! INFO. More INFO. Note INFO. 3 GENERAL CAFÉ ELITE Introduction Thank you for choosing a Café Elite vending machine. We hope you enjoy it ! Read the user guide before using the machine. This guide contains important instructions for proper and safe use of the vending machine. Always keep this guide close at hand for future reference. Warnings Never immerse the machine, plug or mains cable in water because there is a danger of electric shock. The appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety. Children should be supervised to ensure they do not play with the appliance. Do not use the machine if the mains cable, plug is damaged or the machine has fallen down. If the mains cable is damaged it must be replaced by the manufacturer, service agent or similarly qualified persons in order to avoid a hazard. Only plug the machine into a properly installed earthed safety socket whose line voltage matches the technical data for the machine. Precautions Do not use the machine outdoors so it can be exposed to weather (rain, snow, frost). It will cause material damage to the machine. Do not try to open the machine or repair it in any way. To avoid danger only have the machine repaired in a technical workshop, Service Centre or by a qualified person. Remove the mains cable from the socket when the machine is not in use for longer periods. To do this, pull the plug not the cable. This appliance must be placed in a horizontal position which is resistant to any water that may leak. Place the machine out of the reach of children. Position the mains cable so that people cannot trip over it. Keep it away from sharp edges and heat sources. The new hose-sets supplied with this appliance are to be used, old hose-sets must not be reused. This appliance is not suitable for installation in an area where a water jet could be used. This appliance must not be cleaned by a water jet. Intended use This appliance is intended to be used in household and similar applications such as: - Staff kitchen areas in shops. - Offices and other commercial working environments. - On agricultural estates. - By clients in hotels, motels and other residential type environments. - Bed and breakfast type environments. 4 For the optimal performance of the machine these parameters shall not be exceeded: - Maximum permissible inlet water pressure : 800KPa (8Bar) - Minimum permissible inlet water pressure: 200KPa (2Bar) - Maximum working temperature: 40°ºC - Minimum working temperature: 10°ºC GENERAL CAFÉ ELITE Facts & weight MODEL/NAME CAFÉ ELITE II CAFÉ ELITE III CAFÉ ELITE IV None None None Yes Yes Yes Drink options 8 8 8 Ingredient canister 2 3 4 Bean hopper None None None Brewing mechanism None None None Cleaning function by smart card Yes Yes Yes Electronic temperature control Yes Yes Yes Adjustable coffee strength Yes Yes Yes Illumination of cup during brewing None None None Base cabinet: large grounds container None None None Energy saving mode Yes Yes Yes Height, Width, Depth 735, 310, 515mm 735, 310, 515mm 735, 310, 515mm 5Litres 5Litres 5Litres Built-in grinder Function for selecting jug Tank volume 220-230VAC 220-230VAC 220-230VAC 50/60Hz/2200W 50/60Hz/2200W 50/60Hz/2200W Cold water connection ½” External thread ½” External thread ½” External thread Water purification filter None None None Power supply MODEL/NAME WEIGHT Café Elite II 30kg Café Elite III 30kg Café Elite IV 30kg 5 OVERVIEW OF COMPONENTS CAFÉ ELITE Front exterior Display Key Switch (Enable Jug Mode) Strength Adjustment COFFEE Smart Card Reader WHITE COFFEE ESPRESSO CAPPUCCINO Door Lock HOT CHOCOLATE MILK CHOCOLATE MOCHACINO HOT WATER Outlet Hot Drinks Drip Tray Insert Drip Tray 6 Drink Buttons OVERVIEW OF COMPONENTS CAFÉ ELITE Front interior of Elite II Ingredient Canisters Mixing System Service lid (for emptying water tank) Power Switch Outlet Hot Drinks Ingredient canisters DETAIL INGREDIENTS WIDTH DEPTH HEIGHT CAPACITY CUPS/UNIT Canister Coffee 137mm 335mm 225mm 5.4L ~675 cups Canister Topping 137mm 335mm 225mm 5.4L ~540 cups 7 OVERVIEW OF COMPONENTS CAFÉ ELITE Front interior of Elite III Ingredient Canisters Mixing System Service Lid (For emptying water tank) Power Switch Outlet Hot Drinks Ingredient canisters DETAIL INGREDIENTS WIDTH DEPTH HEIGHT CAPACITY CUPS/UNIT Canister Coffee 137mm 335mm 225mm 5.4 L ~675 cups Canister Chocolate 67mm 335mm 225mm 2.7 L ~135 cups Canister Topping 67mm 335mm 225mm 2.7 L ~270 cups 8 OVERVIEW OF COMPONENTS CAFÉ ELITE Front interior of Elite IV Ingredient Canisters Mixing System Service lid (for emptying water tank) Power Switch Outlet Hot Drinks Ingredient canisters DETAIL INGREDIENTS WIDTH DEPTH HEIGHT CAPACITY CUPS/UNIT Canister Coffee 67mm 335mm 225mm 2.7 L ~338 cups Canister Espresso 67mm 335mm 225mm 2.7 L ~600 cups Canister Chocolate 67mm 335mm 225mm 2.7 L ~135 cups Canister Topping 67mm 335mm 225mm 2.7 L ~270 cups 9 OVERVIEW OF COMPONENTS CAFÉ ELITE Membrane switch navigation Button functions Press the BACK button if you want to leave the submenu and go back in the menu. E Press the ENTER button to select a menu function, confirm a set value or a setting. Confirm the new setting by pressing the E-button. EE Press the MINUS button if you want to decrease a value or go back in the menu. Press the STOP button if you want to return to the start menu. To activate Energy Saving Mode press and hold the STOP button for 5 seconds. Display will show Energy Saving Mode. To return to normal mode press and hold the STOP button for 5 seconds while the machine is in energy saving mode. Press the PLUS button if you want to increase a value or go forward in the menu. ENERGY SAVING MODE 10 the machine switches off the front display and decreases the temperature in the water tank to 65ºC. OVERVIEW OF COMPONENTS CAFÉ ELITE Technical service card Technical service card is used for example cleaning of the machine and change different settings. The smart card is supplied by your dealer. COFFEE WHITE COFFEE A ESPRESSO CAPPUCCINO HOT CHOCOLATE Insert the technical service card with the chip facing towards the back of the machine. (See fig.A) MILK CHOCOLATE The display will show the Service Menu, Clean Machine and you can now browse forwards through the menu. Service Menu Clean Machine To use the machine again remove the technical service card and store it in a safe place. 11 INSTALLATION AND START-UP CAFÉ ELITE Positioning minimum 10cm Place the machine on a flat horizontal surface that will support the weight of the machine. Connect the electrical plug to a separate grounded wall socket. Note Make sure air is able to circulate behind the machine (minimum 10cm). Machine startup procedure Connect the water to the top cabinet on the machine. Connect the supplied water hose to the cold water connection using a ½’’ R-connection. When pushing the machine into position make sure there is no interference to the hose to ensure proper water flow. If the inlet hose is new, flush the system with water first to remove copper shavings. These can damage the inlet valve. The new tube set supplied with the appliance must be A used. Old tubes may not be re-used. Connection to a closable valve is recommended. Min. water pressure; 2 bar (200kPa). Max. water pressure: 8 bar (800kPa). Open the water tap. Connect the mains cable to the machine (A) and insert the plug to a earthed wall socket. Switch on the power switch on the rear of the machine. See figure. The display indicates Low Water Level Press Enter Key Press the E button. The water tank will now automatically fill with 5 litres of water. The element will not be powered until the water reaches the level sensor. Set temperature is 85º Celsius. Once the water heating is complete “Low temp” text will disappear from the display. (The display text will start to rotate between these two screens 12 COFFEE QUEEN and AT YOUR SERVICE ) INSTALLATION AND START-UP CAFÉ ELITE Fill ingredient canisters 01 02 A Remove the ingredient canisters to avoid spilling in the machine and fill with ingredients . When filling the ingredients, keep the opening of the canister chute upwards (A). 03 Open the door. B B Reassembly canisters. When placing the ingredient canisters, Ensure that the openings of the canister chutes point down toward the mixing bowl (B). 13 OPERATION CAFÉ ELITE Dispensing drinks in a cup EE COFFEE WHITE COFFEE ESPRESSO CAPPUCCINO HOT CHOCOLATE MILK CHOCOLATE MOCHACINO HOT WATER A Place a cup under the outlet for hot drinks. (See fig. A) The strength of the drink is set to default. If you would like to increase or decrease the strength then follow the steps in the section below. Stronger drink, Press the button or Weaker drink, Press the button Choose drink. The display shows: Please wait... and the cup light goes on. Wait until the cup light switches off and the text Please wait... has disappeared from the display before removing the cup. 14 OPERATION CAFÉ ELITE Dispensing drinks in a jug Key Switch EE A Turn key switch to enable jug mode. (See fig. A) Place a jug under the outlet for hot drinks. The strength of the drink is set to default. If you would like to increase or decrease the strength then follow the steps in the section below. Stronger drink, Press the button or Weaker drink, Press the button Choose drink. Wait until the cup light switches off and the message Please wait... has disappeared from the display before removing the jug. You can abort the jug process by pressing STOP button any time during the process, it will finish the drink in process before complete stop. Turn back the key switch to its original position to exit jug mode. 15 CLEANING PROGRAM CAFÉ ELITE Daily cleaning Automatic rinsing of the mixing bowl Cleaning means rinsing with water and rotating the whipper. Cleaning of the mixing bowl should be performed once per day. EE COFFEE A WHITE COFFEE ESPRESSO CAPPUCCINO HOT CHOCOLATE MILK CHOCOLATE Put a container that holds at least 0.5 litres under the outlet for hot drinks. Insert smart card in the card reader (A). Move through the menu until the display shows Press the E button. Move through the menu until the display shows Press the E Service Menu Clean Machine Service Menu Clean Mixer button. The machine will now clean the mixing bowls for 5 seconds. Remove smart card. Note 16 Repeat the cleaning procedures 2-3 times to get a better cleaning effect. CLEANING PROGRAM CAFÉ ELITE Daily cleaning Automatic cleaning of dispenser valves Cleaning entails that the valves “knock” off any lime scale and other particles that may get stuck in the cylinders and flushing them with water. EE COFFEE A WHITE COFFEE ESPRESSO CAPPUCCINO HOT CHOCOLATE MILK CHOCOLATE Put a container under outlet for hot drinks. Insert smart card in the card reader (A). Move through the menu until the display shows Press the E button. Move through the menu until the display shows Press the E Service Menu Clean Machine Service Menu Clean Valves button. Dispenser valves will now start to open and close with 3 pulses/second for a max of 6 seconds. Repeat the procedure 2 - 3 times. Remove smart card. Note Repeat the cleaning procedures 2-3 times to get a better cleaning effect. 17 CLEANING AND CARE CAFÉ ELITE Weekly cleaning Disassemble mixing system 01 Loosen or take out canisters and pull out the outlet hose. Turn the mounting plate lever anticlockwise. 02 03 Loosen the mixing bowl by pulling it straight out. Loose the whipper by pulling it straight out. 04 06 05 Loosen the mounting plate. Turn the lever anticlockwise, until it stops. Pull the mounting plate straight out. 18 Reassembling mixing system See the next page CLEANING AND CARE CAFÉ ELITE Weekly cleaning Wash these parts Mixing bowl Condensation trap Mounting plate Whipper Clean with a moist cloth and wipe dry. All parts must be dry before reassembly. Reassemble mixing system 01 02 A Check all seals (red) before reassembly of parts. 03 The flat side of the whipper shaft must correspond with the marked arrow on the whipper. To fit the whipper push onto the shaft until a click sound can be heard. It is only possible to assemble the whipper in one way. Fix the mixing bowl and condensation trap. Pushfit the mixing bowl and fix with lever. 04 Connect the outlet hose. Note Ensure that all water hoses have been connected and fitted. 19 CLEANING AND CARE CAFÉ ELITE Failure message Failure messages which can mostly be corrected without any help from service company Water Level Low Press Enter Display shows Then press the Water Level Low Check if water tap is open. Press Enter E button. Display shows normal, but no drink is coming. Possible cause of failure: Mechanical stop in the ingredients canisters or mixer unit. Action: Try to find the cause of failure. Clean the mixer system and try again. Storage / Transport Preparation for transportation or long term storage Turn off the switch, pull out the electric plug and close incoming water tube. Long machine storage at temperatures below 0ºC can cause damage of the machine. Empty all the water in the machine by opening the service lid between the mixer bowls. Pull out the hose, remove the plug and let all water pour out. Reassemble the plug and lid. 20 CLEANING AND CARE CAFÉ ELITE Exterior cleaning Cleaning the outside Use a soft rag and liquid cleaning agent to prevent scratches. Note The machine must not be covered with or immersed in water. To be washed as needed Drip tray and drip tray insert should be washed by hand in ordinary dishwater. Do not wash in a dish washing machine! 21 WARNING MESSAGE SHOWN ON DISPLAY Message on display CAFÉ ELITE Indication Not Available Drink can not be selected as pot. Heating Water Please Wait... Low temperature in the water tank, the machine is heating up (blocked). Low Water Level Press Enter Key Low water level in water tank. Press enter key to start filling up the water tank. Filling Water Please Wait... The machine is filling water. Temperature Shows actual temperature in water tank Energy Saving Mode The machine is in energy saving mode. Warning Low Temperature Temperature is low, it is still possible to dispense drink. Low Temperature Blocked Temperature is low, the machine is blocked. Empty Drip Tray The drip tray is full of water. Overcurrent Overcurrent, some component is using to much current, try to locate the component and replace it. Error: Water Supply The water has not reached the correct level in the water tank. Check the water tap, restart the machine. Error: Water Level Pins Check the level sensor, cable failure, level pins connected incorrect, too much scale or residue on the level pins. Bev. Disabled The drink has been disabled Please Wait Shows when drink is dispensing Door Open The door is open, Close door to proceed. Error: Temp.Sensor Tempsensor damaged, faults in cables Error: Check Heater Solid state defect, heater defect. Output on 1/0 boardvv is defect. 22 PROGRAMMING CAFÉ ELITE Activate programming with smart card Insert the technical service card in the card reader(A). Display shows Service Menu Clean Machine COFFEE A WHITE COFFEE Buttons function Press this button if you wish to leave the submenu and return to the main menu. E Press the ENTER button if you want to enter a menu, alter the value or a setting. Alter a value by pressing the or button. Confirm the new setting by pressing the E-button. Press this button if you wish to increase a value or step forward in the menu. Press this button if you want to reduce a value or go back in the menu. Press the STOP button if you wish to return to the service menu. Note Values displayed in this section as ### is fixed values for display. Values displayed in this section as <XXX> can be changed. 23 PROGRAMMING CAFÉ ELITE Main menu Overview Service Menu Clean Machine Service Menu Counters Service Menu Beverage Setup Service Menu Jug Setup Service Menu Calibration Service Menu Machine Settings Display shows Press Service Menu Language Setup Service Menu Set Time/Day Service Menu Hardware Test Service Menu Factory Reset Service Menu Expert Settings Service Menu Time Schedule 24 PROGRAMMING CAFÉ ELITE Clean machine Service Menu Clean Machine Perform cleaning of the machine. Press Press Service Menu Clean Machine Press E Select Cleaning Mixer System E Machine starts cleaning mixer system. The display will show ”Mixer System” during cleaning. Press Press Select Cleaning Clean Valves E Machine starts cleaning valves. The display will show ”Clean Valves” during cleaning. 25 PROGRAMMING CAFÉ ELITE Counters See the counter of each drink or total counters for all drinks. It’s also possible to reset the drink counters. Service Menu Counters Service Menu Counters Press E Press Press Counters Beverages E Beverage Counters Per Beverage E Drink 1 Served xxx Press Press Press Drink 2 Served xxx Continue through the menu to browse through the counter for all the drinks. Press Beverage Counter Total Served Total Beverages Served xxx E Press Press Beverage Counter Master Total E Master Total Served xxx Press Beverage Counter Clear Counters Hold Enter to Clear Counters Hold ENTER key for 3 seconds E Change ESCAPE to Back 26 PROGRAMMING CAFÉ ELITE Counters See the number of times cleaning has been performed or reset the clean counter. Service Menu Counters Press Counters Clean Counter E Clean Counter Total xxx Press Press Counters Water Filter E Press Water Filter Reset Water Filter Reset? NO/YES Months Left 6 E Press Step forwards in the menu press E Water Filter: Confirm with ENTER Press Water Filter Interval <X> E Set interval value: Confirm with ENTER 27 PROGRAMMING CAFÉ ELITE Beverage setup, Strength and Volume Change strength and volume of the different drinks. Press Beverage Setup Strength E Press Beverage Setup Strength E Press Drink 1 Strength # #%<±X> E Change drink strength value. Confirm with ENTER Press Press Drink 2 Strength # #%<±X> Press Press E Change drink strength value. Confirm with ENTER Continue through the menu to browser through the strength setup for all the drinks Press Beverage Setup Volume E Press Drink 1 Volume # #%<±X> E Change drink volume value. Confirm with ENTER Press Press Press Drink 2 Volume # #%<±X> Press 28 E Change drink volume value. Confirm with ENTER Continue through the menu to browser through the strength setup for all the drinks PROGRAMMING CAFÉ ELITE Beverage setup, Drink Settings and Enable Beverages Beverage Setup Drink Settings Change drink settings and disable drinks. Press Drink settings are only available for mixed drinks Press Beverage Setup Drink Settings Press E Drink 1 Drink 1 Ingredient ##%<±X> E Change drink ingredient value. Confirm with ENTER Press Press Press Drink 2 Drink 2 Ingredient ##%<±X> E Change drink ingredient value. Confirm with ENTER Press Continue through the menu to browser through the strength setup for all the drinks Press Beverage Setup Enable Beverage E Press Drink 1 Enable Bev <on/off> E Enable or disable drink with ON/OFF settings. Confirm with ENTER Press Press Press Drink 2 Enable Bev <on/off> E Enable or disable drink with ON/OFF settings. Confirm with ENTER Press Continue through the menu to browser through the strength setup for all the drinks 29 PROGRAMMING CAFÉ ELITE Beverage setup, Water and Recipe Bank Turn the water ON/OFF and enter recipe bank. Beverage Setup Water <On/Off> Press Beverage Setup Water <On/Off> E Enable or disable water with ON/OFF settings. Confirm with ENTER Press Press Beverage Setup Recipe Bank E Press Key#ZZ R#XXX <Drink 1 name> E Choose which drink key (key #ZZ) that should be related to which recipe (R#YYY) in the recipe bank. Confirm with ENTER Press Press Key#ZZ R#XXX <Drink 2 name> Press Press 30 Continue through the menu to browser through the strength setup for all the drinks E Choose which drink key (key #ZZ) that should be related to which recipe (R#YYY) in the recipe bank. Confirm with ENTER PROGRAMMING CAFÉ ELITE Jug setup Change the number of cups for standard jug. Service Menu Jug Setup Press Press Service Menu Jug Setup E Press Jug Setup Default Cups <X> E Choose the amount of cups to be used as standard when you enter jug mode. Confirm with ENTER Press Press Press Jug Setup Max Cups E Choose the maximum allowed amount of cups to be used when brewing into a jug,Value set here rules the maximum allowed cups in “Defaut cups“ choice above. Confirm with ENTER 31 PROGRAMMING CAFÉ ELITE Calibration Service Menu Calibration Change calibration settings of the machine. Service Menu Calibration Press E Press Calibration Valves Press Select Valve HWater M1 E E Press HWater-M1 ###ml Verify Valve E HWater-M1 Verify: ###ml Water will dispense from the outlet valve nr 1 Press Press Press Press Select Valve HWater M2 HWater-M1 ###ml Calibration Valve E HWater-M1 Volume:<xxx>ml Water will dispense from the outlet valve nr 1. Measure the actual volume in a measurement cup and enter actual water volume. Confirm with ENTER and go back to “Verify Valve“ to verify volume. Press Select Valve HWater Press Calibration Boiler Temp 32 E Boiler 0C Temp: ## Cal:<±XX> set offset temperature for tank water temperature. Confirm with ENTER PROGRAMMING CAFÉ ELITE Machine settings Service Menu Machine Settings Change different machine settings. Service Menu Machine Settings Press E Press Machine Settings Heater Temp Press Set Heater Temp Heater E Heater Idle Temp <XX>ºC E Press Confirm with ENTER Press Press Machine Settings Warning Temp <XX> E Set warning temperature Confirm with ENTER Heater Prio Temp <XX>ºC Confirm with ENTER Press Press Machine Settings FanldleSpeed <On/Off> E Set fan idle speed On/Off Confirm with ENTER Press Press Machine Settings Fan Run Time Press Fan Run Time <XX:XX> E E Set fan run time Confirm with ENTER Press Press Machine Settings Use Driptray<On/Off> E Set use trip dray On/Off Confirm with ENTER Press Press Machine Settings Standby Mode<A/B> E Set standby mode A/B Confirm with ENTER Press Machine Settings Dry Soldout 33 PROGRAMMING CAFÉ ELITE Language setup and set time & day Service Menu Language Setup Change language or update time/day. Press Service Menu Language Setup Press Press E E Language Setup User Language Press User Language <Active language> E Set language Confirm with ENTER Press Press Service Menu Set Time/Day E Press Set Time/Day Set Time E Press Set Time <XX:XX> E Set time Confirm with ENTER Press Press Set Time/Day Set Weekday E Press Set Weekday <Active> E Set weekday Confirm with ENTER 34 PROGRAMMING CAFÉ ELITE Hardware Test Test different components in the machine. Press Service Menu Hardware Test E Press Hardware Test HWater - M1 0 E Service Menu Hardware Test Pressing ENTER will open/ close outlet valve 1 0 = valve closed; 1= valve open Press Press Hardware Test HWater - M2 0 E Pressing ENTER will open/ close outlet valve 2 0 = valve closed; 1= valve open Press Press Press Hardware Test Brewlamp 0 E Pressing ENTER will turn the brew lamp on and off 0 = lamp off; 1= lamp on Press Press Hardware Test HWater 0 E Pressing ENTER will open/ close outlet valve 2 0 = valve closed; 1= valve open Press Press Hardware Test Canister 1 0 E Pressing ENTER will start/stop canister motor 1 0 = motor off; 1= motor on Press Press Hardware Test Canister 2 0 E Pressing ENTER will start/stop canister motor 1 0 = motor off; 1= motor on Press Press Hardware Test Canister 3 0 E Pressing ENTER will start/stop canister motor 1 0 = motor off; 1= motor on 35 PROGRAMMING CAFÉ ELITE Press Hardware Test Canister 4 0 E Pressing ENTER will start/stop canister motor 1 0 = motor off; 1= motor on Press Press Hardware Test Fan 0 E Pressing ENTER will start/stop the fan 0 = fan stopped; 200= fan at full speed Press Hardware Test Heater 0 Shows current temperature in boiler Heater XX0C Press Hardware Test LevelSens 0 Show status of level sensors signal 0= Tank empty 1= Level low triggerd 3= Tank full Press Press Hardware Test Mix Motor1 0 E Pressing ENTER will will start/stop mixer motor 1 0 = motor off; 200= motor at full speed Press Press Hardware Test Mix Motor2 0 E Pressing ENTER will will start/stop mixer motor 1 0 = motor off; 200= motor at full speed Press Press Hardware Test Tray Sensor 0 36 E Connecting the springs together for the drip tray sensor to change value 0= Drip tray not full 1= Drip tray full PROGRAMMING CAFÉ ELITE Factory Reset How to perform a factory reset of the machine. Service Menu Factory Reset Press Service Menu Factory Reset E Reset and Hold ENTER to Reset Press ans hold ENTER for 3 seconds Machine will go back to factory settings and reboot Press Expert settings Service Menu Expert Settings Test expert settings of the machine. Press Service Menu Expert Settings E Press Expert Settings Open Valves E Open Valves Valves<Closed/Open> Press ENTER will open/close all the valves Press Press Expert Settings Heater<On/Off> Press ENTER will turn on the heater for 10 seconds Press Press Expert Settings Open Inlet Valve E Open Inlet Valve HWater In <0/1> Press ENTER will turn on/off the inlet valve 0= inlet valve off; 1= inlet valve open 37 PROGRAMMING CAFÉ ELITE Time schedule How to setup a schedule for energy mode and cleaning. Press Service Menu Time Schedule E Service Menu Time Schedule Press Scheduled Tasks Energy Mode E Energy Mode 0 Mon<XX:XX XX:XX > Press Energy Mode 1 Tue<XX:XX XX:XX > Press Press Continue through the menu to browse through all the settings for each week day Press Scheduled Tasks Clean Mixer E Clean Mixer0 All<XX:XX XX:XX > Press Clean Mixer 1 All<XX:XX XX:XX > 38 DIMENSION SKETCH CAFÉ ELITE A Café Elite C B Model A B C Café Elite II 735mm 310mm 515mm Café Elite III 735mm 310mm 515mm Café Elite IV 735mm 310mm 515mm 39 EXPLODED VIEW CAFÉ ELITE Door Drawing 05 06 07 08 09 10 11 12 01 13 02 14 15 03 04 16 40 EXPLODED VIEW CAFÉ ELITE Door Spare parts list POS. PCS Part No. Description 01 1 1202551 Key switch 02 1 1665009 Left overlay 03 1 1665002 Middle printing film 04 1 1665001 Membrane switch 05 1 710028 LED complete 06 1 180115 Guide pin, door 07 1 710556 PCB UC and display 2x16 complete 08 1 1604119 Battery CR 1220 3V 09 4 1604113 Spacer for UC merisc 10 1 1604117 PCB display board UC-meric 11 1 1604122 Display 2x16 12 1 1602697 Card reader 13 1 1605401 Grommet 14 1 1660009 Smart card red 15 1 260067 Drip tray insert 16 1 1264007 Drip tray 41 EXPLODED VIEW CAFÉ ELITE Machine 1 Drawing 05 02 06 07 01 18 08 19 03 04 09 12 13 10 14 15 16 17 19 Large canister for ELITE II & III 20 42 11 EXPLODED VIEW CAFÉ ELITE Machine 1 Spare parts list POS. PCS Part No. Description 01 1 120250 Key lock 02 1 120251 Key for Lock of Door 03 1 1206121 Non return valve holder 04 1 1604111 PCB main board IO-TE 05 4 1205626 Canister W67 H335 06 1 1505076 Rubber plug,10mm 07 2 120465 Rubber TPG 20.5 08 1 160841 Door microswitch 09 1 160536 Rubber TRP 30.0 10 1 1602414 Terminal block 11 1 1031652 Power supply 150W 12 1 1604203 Solid state 25A 13 1 1206581 Seal solid state 14 2 1604836 Hose adapter for mixing system 15 1 160801-04 Rocker switch 16 1 1206706 Bulkhead adaptor 17 1 1205500 Spring level sensor 18 1 1604384 Fuse 5 AT 19 1 1205630 Canister W137 H335 Complete 20 1 1608710 LED Diod 43 EXPLODED VIEW CAFÉ ELITE Machine 2 Drawing 01 08 02 09 11 13 10 03 04 05 12 14 07 06 15 16 17 44 Pos 16 & 17 for machines produced after 20130501 EXPLODED VIEW CAFÉ ELITE Machine 2 Spare parts list POS. PCS Part No. Description 01 1 1561015 Over flow pipe 02 3 1206290 Outlet valve deltrol 24VDC 03 4 1604612 Motor gear 145RPM 04 4 1604614 Drive shaft 16mm 05 1 1604351 Fuse assembly 06 1 1604179 Fan holder 07 1 1505042 Inlet hose with connect 08 1 160565 Power cord Europe 16A/230V 09 1 160570 Main socket 10 1 220220 High limit switch 11 1 1263501 Water tank 5L complete 12 1 1206371 Single valve 2.5L 24VDC 13 1 1403401 Inlet valve plug 14 1 1604171 Fan 24VDC 15 1 1604174 Fan connection tube 16 1 1604151 Centrifugal Fan 24V 0.24A RBH7530B2 17 1 1561055 Air Flow Tube Cafe Elite 45 EXPLODED VIEW CAFÉ ELITE Tank Drawing 01 02 07 03 04 06 05 08 09 10 11 25 18 19 12 20 26 21 27 22 23 28 13 14 15 24 16 29 17 30 46 31 32 33 EXPLODED VIEW CAFÉ ELITE Tank Spare parts list POS. PCS Part No. 01 1 1401101 Nut M3 SS A2 Description 02 1 1461008 Spring washer M3 03 1 1364026 Sensor short 60mm 04 1 1205301 Sensor long 90 mm 05 1 1605362 Double seal level sensor 06 1 1666013 Harness water level sensor 07 1 1660057 Valve coil 24V DC black 08 1 1660058 Valve metal plunger and spring 09 1 1501193 valve silicone plunger 10 1 1660060 Valve upper body 11 1 1206452 O-ring adjustment screw 12 1 1206451 Valve body o-ring 13 1 1660062 Valve lower body 14 1 260851 SS clamp holder left 15 1 260852 SS clamp holder right 16 1 220220 High limit switch 17 1 1561014 Inlet pipe tank 18 1 250433 Tank washer 19 1 1402003 Screw M4 x 16mm 20 1 260144 Tank lid fixture 21 1 1206507 Fiber washer 22 1 1561012 Seal gasket tank 23 1 1206505 Gasket for Hl switch ber 16.8x12.4 24 1 1601311 Element 2200W/230V with SS nuts 25 1 1605363 Silicone plug 26 1 1561015 Overflow pipe 27 2 160538_03 Plug for water outlet 28 3 1561010 Seal for outlet valve 29 1 150501 Tube silicone 8-12mm 30 1 1206290 Outlet valve black 24V 31 1 1604135 NTC thermistor 32 1 1605361 Seal for NTC 33 1 1201295 Insulation 5L tanks (black 15mm) 47 EXPLODED VIEW CAFÉ ELITE Mixing system and outlet Drawing 11 03 10 12 09 08 07 06 05 04 14 13 48 14 02 01 EXPLODED VIEW CAFÉ ELITE Mixing system and outlet Spare parts list POS. PCS Part No. Description 01 1 1604591 Motor whipper 24V DC 02 1 1206701 Motor whipper plate 03 1 1206706 Bulkhead adaptor black 04 1 1604804 Slinger disc 05 1 1206702 Mounting plate 06 1 120638 O-ring 07 1 120655-02 Whipper shaft gasket 08 1 1206703 Whipper 09 1 1206704 Mixing bowl black 10 1 1206707 Steam trap black 11 1 7001111 Whipper motor complete 12 1 1206705 Outlet elbow mixer bowl 13 3 1201411 Angle of outlet 14 2 1031501 Elbow tube 49 EXPLODED VIEW CAFÉ ELITE Canister Drawing 01 08 02 03 04 05 09 10 50 06 07 EXPLODED VIEW CAFÉ ELITE Canister Spare parts list POS. PCS Part No. Description 01 2 1204953 Lid for canister W67 02 3 1204715 Auger 03 3 1204776 Auger holder 04 3 1204777 Auger nut 05 2 1204722 Canister base W67 06 3 120633 Outlet 07 3 1204775 Plastic nut for auger 08 3 1204746 Agitator 09 1 120489 Canister W64 pipe destra 7cm L/H 10 1 120493 Canister W64 pipe destra 7cm R/H 51 CIRCUIT DIAGRAM High Current 52 CAFÉ ELITE CIRCUIT DIAGRAM CAFÉ ELITE High Current 3-phase 53 CIRCUIT DIAGRAM CAFÉ ELITE HOT WATER MIXER 2 IO-Board Outputs 54 CIRCUIT DIAGRAM CAFÉ ELITE Ucmerisc and IO-pay board 55 For the warranty to be valid the conditions for maintenance must have been followed according to our instructions, proper precaution has been made and warranty claim been issued without delay. The affected equipment may not be used during awaiting service if there is any risk that the damage or defect would worsen. The warranty will not cover consumption supplies such as glassware, normal maintenance such as cleaning of filters, contaminations in water, lime, incorrect voltages, pressure or adjustment of water amounts. The warranty will not cover damages of defects caused by incorrect handling and operation of the appliance. FOR SERVICE Please contact your dealer Your Dealer www.creminternational.com