Download T&l 01 / 9 - Whirlpool Corporation
Transcript
T&l 300INCH FREE-STANDING 01 / 9 ELECTRK RANGE Model RJE-365B Control Pane Model and Serial Nutiber Plate Broil Element Automatic Oven Light Stitch Guides Bake Element Copy Your Model and Serial Number Here - If you have questrons or need to call for serv~cc the service company will ask for your Model and Srrlal Numbers. Your new range has these numbers WI a plate above the oven .Just behmd the top of the overt door Copy the numbers in these spaces whrle you are thinking about it Keep this book in a handy place Your warrarlli _ and sales slip should be kept with It See Cooking Guide for important Model Number Serml Number Purchase Date Service Company and Phone Number safety information. Oven Signal Light Oven Temperature dntrol Clean Light Lock Light Knob Oven Selector Knob Table of Contents Page YOUR RESPONSIBILITIES ................. ......... USING THE SURFACE UNIT CONTROLS .............. USING THE OVEN CONTROLS ................... Bakrng ................ .................... Broiling ..... ........................ Vanable Broil Feature ........... Resetting the Oven Temperature Control. ................ l l l l 3 4 4 4 4 ..... 2 SETTING THE CLOCK TO THE CORRECT TIME OF DAY USING THE MINUTE TIMER .......................... ... USING THE AUTOMATIC MEALTIMER” CLOCK ........... OVEN RACK POSITIONS .... ........................ USING THE OVEN LIGHT ... ....................... THE OVEN VENT ...... ........................ THE OPTIONAL ROTISSERIE ......................... ACCESSORY CANNING KIT .............................. USING THE SELF-CLEANING OVEN. ..................... CLEANING AND CARING FOR YOUR RANGE ............ l l l l Removing Cleaning Removing Cleaning and Replacing Control Knobs ............. Under the Cooktop ............................. the Storage Drawer ............................ Chart ........................................ IF YOU NEED SERVICE OR ASSISTANCE 1. 2. 3. 4. ................. Before Calling for Assistance ........................... If You Need Assistance ................................. If You Need Service .................................. IfYouHaveaProblem ................................ ..... 6 6 6 8 8 8 9 9 9 12 12 13 13 14 15 1.5 16 16 16 l Tmk Surface Unit Signal Light Clock Surfa’ce Unit Control Knobs Minhte Timer Surface Unit Indicators Stop Time Knob Start Time Knob Your responsibilities Proper installation and safe use of the range are your personal responsibilities. Read this “Use and Care Guide” and the “Cooking Guide” carefully for important use and safety information. You must be sure your range. l is properly installed and leveled on a floor that will hold the weight, and in a well-ventilated room. l isconnected only to the right kind of outlet, with the right electric supply and grounding (see “Installation Instructions”). l is used only for jobs expected of home ranges. l is out of the weather l is properly maintained. l is not used by children or others who may not understand how it should be used. Using the surface unit controls Surface Unit Control Knobs must be pushed in before turning. Turn either- way to the setting you want. A design by each knob tells which unit is turned (For exampie. [ ;] shows the right front unit,) on by that knob, The Signal Light will glow whenever a Surface Unit is on. Be sure this light is off when you have finished cooking. PUSH IN and turn to setting. The knob may be set anywhere between “HI” and “OFF.” As you use your surface units. you will get used to the settings that match your pots. pans and favorite foods the best. As a guide. the setting should cook at about the following heats: HI - To start most foods cooking To bring water to a boil. MED-HI - To hold a rapid boil; to fry pancakes or chlcken. MED - To make gravy. puddings and icings; to cook large quantities of vegetables. MED-LO - To keep food cooking after starting it at a higher setting. LO -To keep food warm until ready to serve. You will notice that you can set the heat higher or lower within the LO band [ &!?I to help keep food at the temperature you want NOTE: Use only flat-bottomed utensils for best results and to preor ndged bottoms vent damage IO the Ianye Specialty Items with rounded (woks. ridged-bottom ca!lnerh or tea kettles) are not recommended See the “Cooklnq C,ulde” for !mportant utensil informatlon Using the oven controls Baking: First--Follow the dIrectIons on page 8 for “Positioning Oven Racks.” To bake, turn the Oven Selector Knob to BAKE. Second-Turn the Oven Selector Knob to “BAKE.” the Oven Temperature Control Knob to the baking temperature you want The Oven Signal Light will glow while the oven is heating. When this light goes off. the oven has heated to the temperature you set. Fourth-Place food In the oven. During baking, the elements will turn on and off to help keep the oven at the temperature you set. The Oven Signal Light will turn on and off with the elements. The top element helps beat during baking, but does not turn red. Fifth-When the baking is done. turn both the Oven Temperature and Oven Selector Knobs to “OFF ” Third-Turn NOTE: Do not lock the oven door during baking. may not be able to unlock it until the oven has cooled. Broiling: To broil. turn the Oven Selector Knob to BROIL. 4 (Note-The If you do. you door must be partly open while broiling.) First-Follow the directions on page 5 for placing meat at the right distance from the Broil Element. Second-Turn the Oven Selector to “BROIL.” Third-Turn the Oven Temperature Control Knob to “BROIL” or 5). turn it to a lower temperature (see “Variable Broil Feature,” on page Fourth-Put the broiler pan on the oven rack. Fifth-Keep the oven door open about four inches (10 cm). There is a stop in the hinges to hold it there The Oven Signal Light will glow while the broil element is on. Sixth--When you are through, turn both the Oven Temperature Control and the Oven Selector Knobs to “OFF.” The following chart suggests broiling times and oven-rack positions for different kinds of meats when the Oven Selector Knob is set to BROIL. Inches (cm) from Food -~ ALWAYS broil with the door open about 4 inches (10 cm). _~-- Beef Steaks Rare Medium Well dOi Beef Steaks Rare Medlurn Well done Hamburgers Lamb Chops Medium Ham sloe. precooked QTtendered Canadian Bacon Pork Rib or Lo~r Chop Well done Chlckel-i fEiSh i..; ei Description top of food to Broil Element Approximate Minutes 1st side 2nd side 1” (2 5 cm) 1 (2 5 cm) 1’ (2 5 cm) 3” (8 cm) 3” (8 cm) 3” (8 cm) 7-9 9-11 11-13 1’2” (4 cm) 1’2 (4 cm) llj’ (4 cm) ‘2 (1 cm) 4” -5” (IO-13 cm) 13-15 4”-5’110-13 cm) 17-19 4” -5” (IO-13 cm) 19-21 3” (8 cm) 6-8 1” (2 5 cm1 ‘>“-I 11-2 5cm) ‘2” j 1 cm) ‘4” 1” (2-2 5 cm) 2-3 lb (l-l 5 kg) cut In half whole illlets 1.“t iJ I l-2 cm) 3” (8 cm] 6-8 4-5 3” (8 cm) 3” (8 cm) 6-8 6 4-5 4 f’rank!urrprs Loosen the Locking Screw Higher: move black part toward “HI.” One notch equals about 10°F (SW. 6-8 8-10 14-16 4-5 4” -5” 110-13 cm1 15 10 7” -9” (18-23 cm) 25-30 11-16 3” (8 cm) 3” (8 cm) 7-8 10-12 9-14 5-7 3” (8 cm) 4”-5” (lo-13 cm) 3 6-7 3 4-5 Variable Broil Feature: You might want to broil some foods slower than others. Broiling down by setting a lower temperature on the Oven Temperature Control Knob instead of “BROIL.“ Using a lower temperature will cause the broil element to turn on and off during the broiling so that the food broils more slowly. When the Oven Temperature Control Knob is on “BROIL,” the Broil Element heats all the time. Set the temperature lower and it heats some of the time. The lower the temperature setting, the shorter are the periods of heating. can be slowed must Lower: move black part toward “LO.” One notch equals about 10°F (5%). 3-5 4-7 5-7 NOTE: The Oven Selector must be on BROIL and the door be partly open for all broiling temperatures. Resetting the oven temperature control: Does your new oven seem hotter or colder than your old oven? The temperatures in older ovens often shift very gradually, getting hotter or colder without the user really noticing the change. Your new oven is properly adjusted to provide accurate temperatures, but when compared to your old range, the new design may give you different baking results. If you think that the temperature setting on your mnge needs to be hotter or colder. you can adjust the Oven Temperature Control Knob by yourself. To adjust the setting, first pull the Oven Temperature Control Knob straight off. On the back. just across from the locking screw, are a row of notches on the black part of the knob and one tooth on the chrome part. To set your oven about lO”F(5”C) cooler, loosen the locking screw about two full turns and move the row of notches one notch closer to “LO.” To set your oven about lO”F(5”C) warmer, move the row of notches one notch closer to “HI.” Each notch equals about lO”F(5”C). Tighten the locking screw and put the knob back on the control panel. 5 Setting the clock to the correct time of day 1. Push in the Minute Timer Knob and turn it clockwise to set the hands to the correct time i,f day 2. The Minute Timer hand will turn as you set the clock. When the clock is set, let the knob pop out. Then, while it is out. turn the Minute Timer hand clockwise to “OFF,” If you push in on the knob when setting Clock and Timer Knob the Minute Timer, you will change the setting of the clock. Using the Minute The small numbers Timer inside the clock face are the minute markings Turn the knob in the center of the clock...don’t push it in...to the number of minutes you want to time. When the time you set is up. a buzzer will sound. Turn the hand to “OFF” to stop the buzzer. The Minute Timer does not start or stop cooking It only buzzes when the time you set IS up It can be used to time almost any cooking operation. It can even remrnd you of other things (like when to add the softener to the washer) For the most accurate trming. turn the knob past the time you want Then turn it back to the setting Minute Timer Using the automatic MEALTIMER’ clock The automatrc feature of the MEALTIMER’ Clock lets you be away from home when the oven starts, or when it stops. It WIII turn on and off automatically. or Just turn off automatically. Let‘s say you haI.‘e a roast that will take four hours to cook. Dinner is supposed to be at 6~00. but you have an apporntment at 1.30 and you know you won’t get horne until at least G-00. When do you have time to put in the roast’) With the Automatrc MEALTIMER* Clock, It‘s easy. Just before you leave for your apporntment. put the roast in the oven. set the start time for 2:00 and the stop trme for 6:00 (four- hours). Set the Oven Selector to “TIMED” and set the Cven Temperature Control Knob for the temperature you want Then leave The oven will start at 2:O0. bake for four hours at the selected temperature. and shut off at 6:OO. ‘Tmk To start and stop your oven automatically: 1. Put racks where you want them and place food in the oven. 2. Be sure the clock is set to the right time of day. (The start and stop time hands will also show the correct time. I 3. Push in and turn the Start Time Knob clockwise to the time you want the oven to start. 4. Push in and turn the Stop Time Knob clockwise to the time vou want the oven to shut o-if. 5. Turn the Oven Temperature 6. Set the Oven Selector to Control Knob to the temper“TIMED.” ature you want to use to cook the food. When cooking is finished, turn both the Oven Selector and the Oven Temperature Control Knobs to “OFF.“ If you want to stop the oven before it stops automatically, the Temperature oisen. You don’t and Selector Knobs to “OFF.“ Remove food have ro do anything with the Stop Time Knob from turn the When you want the oven to start now, but stop automatically: 1 2 Put racks where you want them and place the food in the oven. Be sure the clock ;Irrd the start and stop time hands show the right time of day 3 Push tn and tur’n tile Stop Time Knob to the trme you want the oven to stop cooklny. 4. Turn the Oven Seltictor to “TIMED” and the Oven Temperature Control to the temperature setting you want 5. When cooking is finished, turn the Oven Selector and Temperature Control Knobs to ‘OFF“ Oven rack positions Your them oven has rwo racks. Always put the racks where you want to be before you turn on the oven. To rernove a rack. take hold of it on the front edge and pull it out until it stops Then 11ft up the front edge and pull again It will slide past the stops. out of the guides and out of the oven. To put it back. ill the back corners into the guides at each side of the oven alld slide it in. keeping the front tilted up until the rack passes the stops in the rack guides. -.__Place Rack: For: Baking To remove rack, pull forward until rack stops, lift and pull. ___ Broiling On the second rack guide from the bottom so food is in the center of the oven -.~ or So food is about the distance from the broil element suggested in the broiling timetable under “Using the Oven Controls.” Roasting LARGE cuts of meat On the bottom Roasting SMALL.ER cuts of meat _____._.~~ &I food rack guides. IS in the center of the oven. ~~ ~-. When baking, always leave at least 1% to 2 inches (4-5 cm) of air space between the sides of a pan and other pans and the oven wall for air circulation. sheets For best results. yer addItIonal information on placlng and (Ither utensils from the “Cooking Guide ” Using pans. cookie the oven light The oven light will come on when the oven door is opened To replace the oven light bulb: To replace the oven light, remove glass cover. The oven light bulb has a glass cover which is held on by a wire holder This cover must be in place when the oven is being used 1 Turn off the electric power at the main power supply. 2 Pull out on the wire holder and move it to one side. This will let YOU remove the glass cc)ver 3 Replace the bulb wlfh a 40.wat t appliance bulb (designed to stand up to oven heat) available at most grocery, variety and hardware stores 4. Replace glass cover snap the wire holder in place The oven vent There is an oven vent under the right rear surface element. When the oven is on. heated air will escape through it. A vent is needed for air circulation in the oven during baking. You can cook on this surface unit while the oven is on A warm pan of food will stay warm on this unit while the oven is on It may be warm enough to melt butter. too. Do not try to save heat or energy by blocking the vent. Poor baking can result. Plastic utensils may melt if they are over the vent while the oven is on. 8 The optional rotisserie If you would like a rotisserie with your oven, (Part No. 261881) from your dealer. Easy installation with the kit. Accessory canning you can order a kit instructions come kit (Part No. 242905) The large diameter of most water-bath or pressure canners combined with high heat settings for long periods of time can shorten the life of regular surface units and cause damage to the cooktop. If you plan to use the cooktop for canning, we recommend the installation of a Canning Kit. Order the kit from your Whirlpool Dealer or Tech-Care Service Company. SEE THE “COOKING INFORMATION. Using GUIDE” the self-cleaning FOR IMPORTANT CANNING oven cycle The Self-Cleaning Oven uses high heat that actually burns away oven soil. For best results and safety, read this section carefully. Make sure you understand how everything works before you set your oven to “CLEAN.” Things to do before you start: l l l l l l l l Some areas may not be cleaned during the Self-Cleaning cycle. -The frame around the oven opening -The door. especially the part around the outside of the oven seal. So11 on these areas will be more difficult to remove after the SelfCleaning cycle. Use hot water and detergent.. or a soapy steel-wool pad. Rinse well. Do not move or bend the fiberglass oven door seal. Do not try to clean it by hand. The high heat during the cleaning cycle will discolor the racks and take the shine off them if they are left in the oven during the SelfCleaning cycle If you want your oven racks to stay shiny and bright, take them out before starting the cleaning cycle. If you do clean the racks during the cleaning cycle. read the “Special Tips” at the end of this section. Don’t leave any pots or pans in the oven during cleaning. They won’t be able to stand the high heat. Wipe up spillovers. boilovers and grease that hasn’t baked onto the bottom of the oven. This WIII help reduce smoking during the cleaning cycle. Chrome reflector bowls must not be cleaned in the oven. Turn on the vent hood fan or other kitchen vents during the cleaning cycle. This will help remove smoke. odor and heat that are normal during the cycle. If you have a rotisserie, be sure the motor socket cover is closed. Setting the controls to the Self-Cleaning s*I*clor I I 1. Set the Oven Selector Knob to “CLEAN.” cycle: oren ,emp I 2. Set the Oven Temperature Control Knob to “CLEAN.” 1 10 3. The clock and dials for start and stop time should all have the right time of day. 4. Push in on the Stop Time Knob and set it ahead as manv hours as you want for the cleaning cycle. For a lightly soiled oven, two hours ahead may be enough. For heavy soil, three hours ahead may be about right. If some soil does not get removed during the cleaning cycle, see “Special Tips” later in this section. 5. Lock the oven door by moving the Lock Lever all the way to the right. When it is all the way over, the Clean Light will come on. If the Clean Light doesn’t come on, the lever isn’t all the way over and the cleaning cycle won’t start. When the clean light comes on, the oven starts the cleaning cycle. About 20 minutes later, the Lock Light will come on. It will stay on during the cleaning cycle. The door cannot be unlocked while the Lock Light is on. 6. The oven will shut off when the preset stop time is reached, but the oven door will stay locked until the oven has cooled. When the Lock Light turns off, turn the Oven Selector and Oven Temperature Control Knobs to “OFF.” Now move the Lock Lever back to the left. This turns off the Clean Light. Do notforce the Lock Lever. If it doesn’t want to move easily, wait until it does. With the Lock Lever all the way to the left, the oven door can be opened. 7. When the oven has cooled off all the way, wipe out any residue or ashes from the bottom. How the Self-Cleaning l l l l l cycle works: When oven controls are set to “CLEAN,” the oven gets much hotter than it does for cooking. This high heat causes soil on the inside oven walls to burn off. or break up and mostly disappear. While this is happening, a special part in the oven vent helps remove smoke. Do not cover the right-rear surface unit during the cleaning cycle. The chart below shows about what happens during a Z-hour SelfCleaning cycle. Any time less than that shortens only the cleaning cycle, not the heating and cooling times. Don‘t touch the range during the cleaning cycle .it will be hot. When the cleaning cycle is over, you will find some fine ashes in the oven. The amount of ash depends upon the amount of soil there was in the oven. When the oven is cool, clean up all that is left with a damp cloth, cleanser. or a soap-filled steel-wool pad. During the cleaning cycle. you may hear the sounds of metal heating and cooling. These are normal sounds, and a lot like those you can hear when the oven heats for regular cooking. SELF-CLEAN H hr. OVEN-LIGHT 1 hr. 1% hr. SOIL CYCLE 2 hr. 2HI 91. 11 1 Special tips: l l l l If the cleaning cycle doesn’t get the oven as clean as it should be, the time set for cleaning was probably not long enough. Set the cleaning time longer next time. You can set it for more than 3 hours, If you want Plan to clean the oven before it gets too heavily soiled. Otherwise. you may notice more smoke than you would expect coming from the oven vent. And. the cleaning cycle has to be longer to clean a very soiled oven. There will be normal “heat odors” during the cleaning cycle. To help get rid of them. keep the kitchen well ventilated. To stop -Turn -Turn -Turn -Unlock off. the the the the cleaning cycle after Stop Time Knob to Oven Selector Knob Oven Temperature and open the oven it has started: the right time of day to “OFF.“ Control Knob to “OFF” door when the Lock Light turns NOTE: Do not force the Lock Lever. Wait until it moves easily. l l l Do not use foil or other oven liners in your Self-Cleaning Oven. Don’t use commercial oven cleaners in your Self-Cleaning Oven. If racks are left in the oven during a cleaning cycle. they will lose their shine, discolor and be harder to slide in and out. To make them slide easier. polish the edges of the racks and rack gurdes with a soap-filled steel wool pad. rinse well. and wipe on a thin coating of salad oil Cleaning and caring for your range Your range is desrgned to be easy to clean. You will usually wipe off spills and spatters when they happen, but you will sometimes want to clean under and behind the control knobs and surface units This section will tell you how to remove those. and what to use when cleaning. Removing and replacing surface unit control knobs: 1. Be sure the control knobs are set to “OFF.” 2 Pull the black knobs straight off. 3. If the control has a chrome trim ring, pull it straight off. 4 Wash the knobs (and trim rings) in warm. sudsy water. 5. Replace the trim rings first. If the control spring was removed, it back exactly as shown on the left...small 6. Hold the black knob so it points to “OFF” put end first. Push it straight back on. Removing and replacing oven control knobs: Pull knob and trim ring straight out. Remember how the spring goes. 1, Be sure the knobs are set to “OFF” 2. Pull each knob straight off. 3. Wash the knobs in warm, sudsy water. 4. The knobs are not interchangeable. Make sure you put the adjustable Oven Temperature Control Knob on the right place, and the nonadjustable Oven Selector Knob on the other. 12 Removiny surface units and reflector bowls: ! 2 First. be sure the Surface Unit Controls are all “OFF” and that the surface units are cool. im.iit czach surface unit about an inch (2.5 cm) at the edge away from the pl~:y in (receptacle) Pull the unit straight away from the plug-in. DO not wdsh surf~e units: they will burn themselves clean during normal UW : I-lft (jut the refiec:or bowls To remove surface unit, lift and pull straight out. Hold surface unit Ic~ei when replacing. I : Puch Replacing reflector bowls and surface units: 1 2 ,i 4 Re ‘;lure the surface unit controls are on “OFF” F’i~t the reflector bowls back into their places. Make sure you can see eile plug-ir!s (receptacles) !or the surface units through the square !:c~le 1~ tht’ side oi each bowl. i~!oid the surface [[nit level with the prongs (terminals) pointing at 1119 j:iLig in 1Vit’i :&J prong5 started In the plug-in, start pushing in on the surface ITII! At the 5ame t~~r,e. lift a little 011 the side of the surface unit that’s 8,/’ ‘r!t’ piag !i I lJIal;t; ~lirt7 ‘he surfxe-unit prongs are pushed into the plug-in as far as !hec. wili gs-, T’tl(> sIrface unit should fit into the reflector bowl and be k!W! Cleaning under the cooktop: Prop up the top with support rod. To clean the area under the cooktop, lift the front of the cooktop at !t>e [-enter Raise the swing-up rod to hold it. (Be sure the tip of the rod is in the notch in the cooktop. ) Use warm soapy water and a sponge or cloth. 5, oi:nng powders 01 any other abrasive cleaner may harm porcelaine,~an;t’l finishes and can scratch chrome. Be carefui nor to raise the cooktop so high that it touches the i :.lnlrol console. And don’t drop it. Dropping the cooktop can chip or crack a hard po:c-elain finish or damage side panels and surface units Removing the storage drawer (use care when handling the drawer): The drawer below your oven is meant to store pots and pans. Never keep anything in there that will burn or melt. Pull to stop. Lift; pull again. You may want to remove the drawer for cleaning under the range. Pull 1~straight out until it stops. Lift the front and pull some more to get it over the stop Now slide rt out until it stops again. Lift the drawer away f:cJm the range until it slips out of the guides. To put it back. fit the side rails at the back of the drawer into both guide> on the range. Push it closed while lifting the front to get past the stops 13 PART WHAT TO USE Outside of appliance Soft cloth, warm HOW TO CLEAN soapy water Nylon or plastic scouring for stubborn spots Surface units pad l Do not immerse l Wash. l Do not soak. l Clean l Wash with l Do not use harsh l Do not place l Wash l Do not place l Wash, rinse and dry with cycle l Leave in oven Warm, soapy water steel wool pads or soapy l Wash, rinse and dry. stubborn areas Warm. soapy water scrubbing pad or plastic l Make certain oven with soft cloth. l Follow l Clean before using Self-Cleaning burn-on of soil. cycle l Follow directions given on page Self-Cleaning Oven Cycle.” 9, “Using l Do not use commercial sudsy water Control Warm, soapy Self-Cleaning Commercial Self-Cleaning Oven Do not allow food containing acids (such as vinegar, tomato, lemon juice or milk) to remain surface. Acids will remove the glossy finish. Wipe off excessive spills with damp cloth when surface unit IS cold. Do not place in Self-Cleaning Oven. Warm, soapy water steel wool pads door l and bristle or soapy water Oven glass cleaner For areas outside SelfCleaning area use warm. soapy water or soapy steel wool pads or harsh or spills will burn on cleansers. off. in water rinse and dry well frequently. other with cooking utensils. abrasives in Self-Cleaning other cooking Oven. utensils. in Self-Cleaning directions during Oven. soft cloth. Self-Cleaning Use soapy is cool. provided Do not use foil to line the bottom of your Self-Cleaning 14 is cool. l Aluminum broiler pan and grid Oven glass range Spatters required Automatic dishwasher or warm. soapy water or plastic scrubbing pad racks when l No cleaning Chrome reflector Oven off regularly Do not use abrasive - Warm. brush panel Wipe l Control knobs and chrome rims bowls l cycle steel wool Wash, with oven pads for rinse and dry well cleaner cleaners. Oven. to prevent the IF YOU NEED SERVICE OR ASSISTANCE. FOLLOW THESE FOUR STEPS: 1. Before calling for assistance.. WE SUGGEST YOU . Performance problems often result from little things you can find and fix yourself without tools of any kind. If nothing operates: l l Is the range plugged into an operating outlet or wired into a live circuit with the proper voltage? (See Installation instructions.) Have you checked the main fuse or circuit-breaker box? If the oven will not operate: l l Is the Oven Selector Knob not TIMED)? Is the Oven Temperature setting? turned Control to a setting Knob (BAKE turned or BROIL, but to a temperature If surface units will not operate: l l l Have you checked the main fuse or.circuit-breaker Are surface units plugged in all the way? Do the control knobs turn? If surface-unit l l box? Control Knob or Knobs will not turn: Is the spring put in correctly, as shown and Caring for your Range” Section? Did you push in before trying to turn? If the Self-Cleaning on page 12 in the “Cleaning Cycle will not operate: 0 Are the Oven Selector Knob and Oven Temperature Control Knob set to “CLEAN”? l Does the Start Time Knob show the correct time of day? l Is the Stop Time Knob set ahead to the time you want the cleaning cycle to stop? l Is the Lock Lever al! the way to the right? (The Clean Light will come on ) If cooking results aren’t what you expect: Is the range level? Are you using pans recommended in the Cooking Guide? l If baking. have you allowed 1% to 2 inches (4-5 cm) on all sides of the pans for air circulation? l Does the oven temperature seem too low or too high? See page 5, “Resetting Your Oven Temperature Control Knob.” l Have you preheated the oven as the recipe calls for? l Are the pans the size called for in the recipe? l Are you following a tested recipe from a reliable source? l Do the cooking utensils have smooth, flat bottoms? l Do the cooking utensils fit the surface unit being used? See the Cooking Guide for more information on cooking problems and how to solve them l l 15 2. If you need assistance*. .. Call the Whirlpool COOL-LINE3 service assistance telephone number. Dial free from: Continental U.S. . . . . . . . . . . . . . . . . . . . . . . . (800) 253-1301 Michigan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (800) 632-2243 Alaska & Hawaii . . . . . . . . . . . . . . . . . . . . . . . . (800) 253-1121 and talk with one of our trained Consultants. The Consultant can instruct you in how to obtain satisfactory operation from your appliance or, if service is necessary, recommend a qualified service company in your area. Tkl 01 2 7m//CA~E FRANCHISED SERVICE 3. If you need service*. . Whirlpool has a nationwide network of franchised TECH-CARE8 service companies. TECH-CARE service technicians are trained to fulfill the product warranty and provide after-warranty service, anywhere in the United States. To locate TECH-CARE service in your area, call our COOL-LINE service assistance telephone number (see Step 2) or look in your telephone directory Yellow Pages under: APPLIANCES-HOUSEHOLDYAJOR-SERVICE A REMIR WHIRLPOOLAPPLIANCES FRANCHISEDTECH-CARESERVICE SERVICE XYZSERVICECO 123Map,e, WASHING MACHINES, A IRONERS-SERVICING ELECTRICAL APPLIANCESMAJOR-REFUIRING A #RX OR C0MPA.AlE.S .999~99!3s WHIRLPOOLAPPLIANCES FRANCHISEDTECH-CARESERVICE SERVICE XYZSERVICECO 123 Maple, COMPANIES ,999.9999 OR DRYERS WHIRLPOOLAPPLIANCES FRANCHlSEOTECH.CARESERVlCE SERVICE XYZSERVICECO 123 Maple COMPANIES -9989999 4. If you have a problem*. Call our COOL-LINE service assistance telephone number (see Step 2) and talk with one of our Consultants, or if you prefer, write to: Mr. Guy Turner, Vice President Whirlpool Corporation Administrative Center 2000 US-33 North Benton Harbor, Ml 49022 “If you must call or write, please provide: model numbers, serial number, date of purchase, and a complete description of the problem. This information is needed in order to better respond to your request for assistance. Benlon Harbor, Michigan. Automatic Washers, Clolhes Dryers, Freezers, Relrigeralor-Freezers, Ice Makers, Dishwashers, Built-in Ovens and Surlace Units, Ranges, MicroWave Ovens, Compaclors, Room Air Condilioners. Dehumidiliers, Cenlral Healing and Air Conditioning Syslems. Part No. 310615 Printed in U.S.A.