Download Siemens B8762.0GB Technical data

Transcript
BOILER INSTALLATION SEQUENCE
Fitting the boiler hanging
bracket
Fix the hanging bracket (2) to the wall
using the screws supplied. (it may be
necessary to use additional or
alternative fixings to ensure adequate
support).
320
131
105
131
Note: If the boiler is to be fitted in a
timber framed building ensure that
the bracket is secured to a
substantial part of the timber frame
capable of taking the weight of the
boiler.
2
105
22
27
26,5
1
Install the flue system
Install the flue system (refer to
separate air/flue duct installation
instructions).
3
Fitting the boiler
● Lift the boiler (3) up to the wall so
that it is slightly above the hanging
bracket (1).
Note: Lift the boiler from either side
at the bottom edge.
Fig. I.4: Fitting the boiler
Euro B/S 091/0
● Lower the boiler slowly onto the
hanging bracket so that the cross
member at the rear of the boiler
fully engages onto the hanging
bracket.
21