Download ZyXEL Communications VSG1432-B101 START V1.10 Specifications

EPSON
Date:
PSB #:
Reference:
Product(s):
Subject:
PRODUCT SUPPORT BULLETIN
05/10/2010
Originator: esc
PSB.2010.06.002
Authorization:
TI08-45e Rev. A
Total Pages: 2
PowerLite 835p and PowerLite 1815p
Connection Issue Using Quick Wireless Connection Mode
This bulletin was created to inform you of an issue and solution when the projector cannot be
detected with NS Connection using Quick Wireless Connection.
Description of Issue:
When IP addresses of both wired and wireless LAN ports of the projector are on the same
network segment, the projector cannot be detected or connect using Quick Wireless
Connection mode of NS Connection.
Reason:
Solutions:
• Set the IP addresses of both wired and wireless LAN ports on different network
segments.
•
In the case that the IP address is not assigned to the projector’s Wired LAN port by
DHCP server, set the DHCP to OFF and set up the IP address for other network
segment other than 169.254.xxx.xxx/255.255.255.) for the projector’s wired LAN port.
Page 1 of 1
PSB.2010.06.002
EPSON
Date:
TIB #:
Reference:
Product(s):
Subject:
PRODUCT SUPPORT BULLETIN
06/10/2009
Originator: DS
PSB.2009.06.002
Authorization:
TI 09-08j Rev. A
Total Pages: 8
PowerLite 735c / 737c / 745c /755c/ 765c / 835p /1705/1715/1815/1825/7850p
/ 8300 with EasyMP.net option, Pro G5150/G5350 / 1725 / 1735W / 85 / 825 /
826W
Release of EMP NS Connection for Windows & Mac Upgrade from v2.50 to
v2.51
This bulletin was created to inform you of the release of the new version 2.51 of the
EMP NS Connection software.
Description of Change:
Improvements have been made to the EMP NS Connection utility.
Reason:
The improvements to NS Connection V2.51 are as follows
Improvements（V2.50 ( V2.51
Improvements
„ Addition of 10 new languages: Arabic, Ukrainian, Romanian,
Indonesian, Croat, Slovak, Bulgarian, Malay, Vietnamese and Hebrew.
„
Addition of troubleshooting function (Windows Only)
When pressing the troubleshooting button, the
corresponding troubleshooting and error number is displayed
in the error message window.
• When experiencing problems with NS Connect, please report to
Epson the error number along with the failure information.
Error number
Page 1 of 8
PSB.2009.06.002
Also you can access troubleshooting by clicking Start Æ All programs Æ
EPSON ProjectorÆEMP NS ConnectionÆEMP NS Connection V2.51
Troubleshooting.
Page 2 of 8
PSB.2009.06.002
„
Fixed error message displayed by the NVIDIA utility
Failure Symptom
When starting Quick Wireless/USB Display/NS Connection on a PC with
the built-in NVIDIA graphics chip (ex.ThinkPadT61 NVIDIA Quadro NVS
140M/NVIDIA Quadro FX 570M Display Driver), the NVIDIA utility
displays consecutive error messages. As a result, some PCs will
experience a lock-up.
Countermeasure
Hardware acceleration level is set to 3 when Quick Wireless/USB
Display/NS Connection are being used.
Limitation
By setting hardware acceleration level to “3”, the mouse cursor flickers
more visibly than the setting of “None”. This symptom can be avoided by
unchecking the box for Transfer Layered Window on the Adjustment
performance tab in the Set Options window of NS Connection.
Note: When NS connection is being used, and the hardware acceleration
setting is changed manually, at next startup, NS connection starts with
the same setting level of hardware acceleration.
Page 3 of 8
PSB.2009.06.002
Limitation
All Operating Systems
• When using EAP type of security that consumes a lot of CPU resources,
projectors may disconnect from NS connection. The solution is to click
Set Options of NS Connection and set Adjust Performance to Fast.
• It takes more time for the PowerLite 1725 / 1735W / 1825 / Pro G5150 /
Pro G5350 projectors to disconnect from NS connection as compared to
the PowerLite 1705 / 1715 / 1815 projectors, due to the limitation of the
new OS (WindowsCE) on IM-X4 projectors.
• To avoid conflicts between the Quick Wireless and other makers’
utilities, when the Quick Wireless starts, this version stops services of
the other utilities listed in the attached file (Exhibit 1). When quitting
Quick Wireless, the other utilities resume their services.
• In the network environment using IEEE 802.11 b/g standards, the
wireless connection may drop under the following conditions. Due to
specification of wireless controllers, some wireless controllers don’t send
their beacon periodically. Even if a projector is connected to a PC via
wireless, if the projector doesn’t detect the beacon for 11b signal for a
certain period (30 – 60 seconds) from the PC , the projector judges that
there isn’t any PC using the11b signal in the network and switches to
communication with11g (default) signal. On the other hand the PC still
tries to communicate with 11b. As a result, the wireless connection
between the projector and the PC drops.
Solutions to this problem:
a. Establish a wireless communication between the PC and
projector via 802.11a signal.
Windows OS
• Due to a limitation of the module VLC for the Movie Sending mode
of the IM-X4 version projectors, when IM-X4 projectors display
MPEG2 and WMV images in Movie Sending mode via NSC V2.40,
fast-forward and rewind functions cannot be used. When IM-X3
projectors display MPEG2 via NSC V2.40, fast-forward and rewind
functions can be used.
Windows Vista OS
• Multi screen display function cannot be used
• Virtual display driver cannot be installed in PC.
• When UAC (User Account Controls) screen is being displayed, the
projected image pauses.
• The Motion picture of Windows photo gallery cannot be projected in fullscreen mode.
• Still images and motion pictures from Windows Media Center cannot be
projected in full-screen mode.
• Since NS Connection can capture Layered windows, the tool bar of NS
Connection is projected.
•
•
• When projecting images via NS Connection, mouse cursor might blink
depending on PC specification.
Page 4 of 8
PSB.2009.06.002
Macintosh OS
In case of uninstalling NSC V2.20 or later version, it is
possible to uninstall by following 2 methods.
- Delete by installer exclusively for NSC version which you
want to uninstall.
For example, when you want to uninstall NSC V2.40, you need
to use installer for NSC
V2.40. NSC V2.20 and later version can not be uninstalled
automatically by different
version installer.
- Delete manually.
System Requirements:
OS
CPU
Memory
Available hard disk
space
Display
Windows 2000 SP4/ XP Home Edition/ XP Professional(32bit)
/Vista SP1 Home Basic / Home / Premium / Ultimate / Business
/ Enterprise(32bit) Mac OS X 10.3 minimum, OS
10.3.9/10.4.5/10.5.1 recommended
Windows: Mobile Pentium III 1.2GHz at least (Pentium
M1.6GHz at least recommended)
Mac: Power PC G3 900MHz at least recommended
At least 256MB (At least 512MB recommended）
At least 20MB
Minimum- VGA(640×480), Maximum- UXGA (1600 x 1200)
16-bit color or more
Obtaining the Update:
Download epson13123.exe from www.epson.com to the version 2.50 update for NS
Connection.
The files are extracted and copied to C:\EPSON\epson13123_EMP_NS_Connection_251.
The user should be directed to this folder to find the bulletin. The program will automatically
install after the download file is extracted.
Note: on the Mac, the extraction process copies the epson13124_EMP_NS_Connection_251
folder to the desktop. The program and bulletin are inside this folder. The user will double-click
on NSCv2.51_Installer to start the installation process.
Software Upgrade History:
Version Release date
1.00
December 25,
2002
1.10
January 1, 2003
1.20
September 10,
Remarks
New release
Release for PowerLite 7850p
Improved the transfer rate specification for PowerPoint
Page 5 of 8
PSB.2009.06.002
1.30
1.31
1.32
1.40
2003
May 31, 2004
June 18, 2004
January 18, 2004
April 1, 2005
2.00
2006/06/20
2.10
2006/12/08
2.20
2006/05/29
2.30
Nov. 27, 2007
2.40
Mar. 24, 2008
2.50
Jun.2,2008
2.51
Feb.9,2009
images
Support added for WPA and LEAP
Improved screen problem issue
Improved the internal function of connecting to the projector
• Addition of Presentation Mode and Interruption
Prevention function
• Able to present with video set for 32 bit color
• Function improvement with Excel and PowerPoint
• Improved ESSID search lockup prevention when
certain LAN adapters and drivers are used
• Addition of multi screen display function
• Addition of movie sending mode
• - Improvement of connection and usability
• Improvement in the ability to search projectors by
Automatic Search. (For Windows)
• Improvement in the operability of choosing projector.
• Improvement in operability and visibility of “Connect”
button.
• Preventing Virtual Display from being used as primary
display.
• Improvement in the ability of image processing speed.
(For Mac)
• - Change the packet size for a connection request
command used by Quick connection.
EMP NS Connection V2.20 supports Windows Vista (Home
Basic
/Home Premium/Ultimate/Business/Enterprise).
• Supported picture transfer for EMP-1825
• Improved wireless search and connection abilities.
• - Added video format supporting movie sending mode
• EMP NS Connection V2.40 supports Windows Vista
Service Pack 1
• - Supports 24 languages
Supported image transfer and virtual display of 1280 x 768
• Changed the operation method to prevent NS
connection from being blocked by Windows Firewall
Added another wireless LAN utility that NS connection
supports
- Addition of supported models (PowerLite-85/825/826W)
- Addition of supported languages
- Addition of troubleshooting function (Only for Windows)
[Exhibit 1] Wireless LAN client list that NSC V2.30 and V2.40 stops their service
process
Page 6 of 8
PSB.2009.06.002
Supported by V2.30
Manufacturer
Adapter Name
Name
D-Link
Air Plus XTREMEG DWL-G650
NETGEAR
WN511T
BUFFALO
Buffalo all products
IBM
ThinkPad products
IBM
ThinkPad products
Logitec
NETGEAR
Logitec LAN-WAG/U2 Wireless
LAN Adapter
Wireless-G Notebook Adapter
v.5.0
WG511AJP
NETGEAR
WGM511
NETGEAR
WPNT511
Linksys
WPC300N
Linksys
WPC54G
Linksys
WPC54GX4
Linksys
WUSB54GP
Linksys
WUSBF54G
NETGEAR
WG511 v2
Linksys
Page 7 of 8
PSB.2009.06.002
Wireless LAN Utility
Name
D-Link AirPlus
XtremeG Utility (CD)
Smart Wireless Utility
Ver.1.1.5.9(CD)
Client Manager 3
Ver.1.2.10(Web)
Access
Connection(Web) *1
Ver.4 or later
Access
Connection(Web) *1
Ver.3.71
Logitec Wireless LAN
Client Utility
WPC54G-JP setting
utility
NETGEAR WG511A
Smart Wizard
Ver3.2.3.306
NETGEAR SMART
WIZARD -Wireless
Assistant WGM511 Ver
1.0.0.7
NETGEAR WPNT511
SMART WIZARD
Ver1.1.3.0
Wireless-N Notebook
Adapter Wireless
Network Monitor v1.05
Wireless-G Notebook
Adapter Wireless
Network Monitor Ver
3.1
Wireless-G Notebook
Adapter with SRX400
Setup Wizard V1.1
Wireless-G Portable
USB Adapter WLAN
Monitor v1.05
Wireless-G USB
Adapter with Wi-Fi
Finder
Linksys
WPC54GX
Supported by V2.40
Linksys
WUSB54GSC
Supported by Quick
Wireless
Connection V.1.00 /
NSC V2.50
Supported by Quick
Wireless Connection
v1.02 / NSCv2.51
Atheros
Wireless-G Notebook
Adapter With SRX
Wireless Network
Monitor v. 1.2
Compact Wireless-G
USB Adapter Wireless
Network Monitor v1.05
Atheros Client Utility
Broadcom
BCM4311 / BCM2050
Broadcom Wireless
Utility
NETGEAR
WN511B
NETGEAR WN511B
Smart Wizard Utility
NETGEAR
WG111v3
NETGEAR WG111v3
Smart Wizard Utility
NETGEAR
wn111
NETGEAR WN111
Smart Wizard Utility
NETGEAR
WUSB600N
Linksys Wireless
Network Monitor
PLANEX
GW-US300MiniW
PCI GW-US300MiniW
Utility
*1: Because Access Connection service stops, power display of Power Manager becomes
invalid.
Page 8 of 8
PSB.2009.06.002
EPSON
Date:
PSB #:
Reference:
Product(s):
Subject:
PRODUCT SUPPORT BULLETIN
04/20/2009
Originator: JAM
PSB.2009.06.001
Authorization:
TI 09-05e Rev. A/B
Total Pages: 5
PowerLite 735c / Cinema 500 / 737c / 745c / 755c / 765c / 830p / 835p /
1705c / 1715c / 6100i / 6110i / 7800p / 7850p / 7900NL / 8300i / 8300i with
EasyMP.net module / 9300NL / 1815p / 1825 / 822p / 83c / 822+ / 83+ /
G5000 / Pro G5150 / Pro G5350 / Pro G5200W / 1725 / 1735W / 400W /
410W / 84 / 85 / 825 / 826W
PowerLite 61p / 81p / 82c / 821p / 1810 / 260d (Latin America) / 280d (Latin
America) with TCP/IP to Serial converter
Release of EMP Monitor for Windows version 4.30
This bulletin was created to inform you of the release of the new version 4.30 of the Epson
EMP Monitor software utility.
Description of Change:
Improvements have been made to the EMP Monitor software utility.
Note: For the PowerLite 61p / 81p / 82c / 821p / 1810 / 260d (Latin America) / 280d (Latin
America) models, a serial to TCP/IP conversion adapter is necessary. The function of Auto
Update does not work for these models. You need to manually click on refresh to get an
updated status of projectors.
Reason:
The improved points of version 4.30 are as follows:
Application
Version
upgraded
Improved
points
EMP Monitor
Version 4.22 Æ Version 4.30
(1) Addition of 7 new languages
- Indonesian, Croat, Slovak, Bulgarian, Malay, Vietnamese, and
Hebrew
Existing 27 languages
- Chinese (Traditional), Netherlands, Danish, Polish, Hungarian,
Czech, Romanian, Slovene, Norwegian, Swedish, Finnish, Russian,
Ukrainian, Greek, Turkish, Arabic (Windows NT4 does not support),
English, Japanese, French, German, Italy, Spanish, Portuguese,
Chinese (Simplified), Korean, Catalan, Thai
Page 1 of 4
PSB.2009.06.001
(2) Addition of Input Source (Only PowerLite 84 / 85 / 825 / 826W)
Previous version of EMP Monitor included USB Display, USB and LAN as
one source: EasyMP.
The input source buttons for USB display, USB, and LAN are available as
separate input sources as shown below:
- Old version - EMP Monitor V4.22
EMP Monitor V4.22
- New version - EMP Monitor V4.30
EMP Monitor V4.30
.
(3) New feature for the PowerLite 84 / 85 / 825 / 826W.
Displays projector’s serial number in the Menu settings
-
The projector’s serial number is now displayed in the projector’s
menu under “info”,
EMP Monitor can also display the projector’s serial number as
shown below:
Page 2 of 4
PSB.2009.06.001
Limitations
When the PowerLite1725 / 1735W exhibit a Lamp Cover Open error state,
EMP Monitor cannot detect the error. The reason is that when the lamp
cover is opened, the primary power source that reports the error state to
EMP Monitor is turned off immediately. This is different from other models
which make the secondary power source turn off under the same condition.
Note: EMP Monitor Ver. 4.xx is not compatible with EMP Monitor Ver. 3.05 and earlier
versions. EMP Monitor Ver. 4.xx cannot read the setting files of EMP Monitor Ver. 3.05
and earlier versions.
System Requirements:
OS
CPU
Memory
Available hard disk
space
Display
•
Windows 98 SE / Me / NT 4.0 (SP6) *Except Arabic and
Hebrew / Windows 2000 Pro / XP Home Edition / XP
Professional (32 bit) / Vista Home Basic / Home Premium /
Ultimate / Business / Enterprise (32 bit) *Except Ukrainian /
Vista SP1 Home Basic / Home Premium / Ultimate /
Business / Enterprise (32 bit)
• Internet Explorer Ver. 5.0 or later must be installed
Minimum: Pentium MMX 166 MHz (Recommended: Pentium II
233 MHz or higher)
At least 64 MB (Recommended: 128 MB or above)
At least 50 MB
SVGA (800×600) or higher resolution, 32 bit or higher display
color
Obtaining the Update:
Download epson13055.exe from www.epson.com to get the version 4.30 update for EMP
Monitor. The files are extracted and copied to C:\EPSON\epson13055_emp_monitor_430.
This file is a self-extracting archive and will start the installation utility for EMP Monitor. Follow
the on-screen instructions during the installation process.
Page 3 of 4
PSB.2009.06.001
Software Upgrade History:
Version Release date
3.00
December
25,2002
3.01
February
26,2003
3.02
April
18,2003
3.03
November
21,2003
3.04
April
1, 2004
4.01
October
18, 2004
4.02
August
29, 2005
4.10
4.22
May
8, 2006
May
15, 2007
September
26, 2007
March 31, 2008
4.30
April 3, 2009
4.20
4.21
Remarks
Supported PowerLite 735c
Supported PowerLite 7800p / 8300i
Supported PowerLite 7850p / 8300i with EasyMP.net option
module
Supported PowerLite Cinema 500
Supported Serial -TCP/IP conversion adapter for PowerLite
61p / 81p
Supported projectors that are configured on a large-scale
network.
Addition of timer function and auto search function by
specifying IP addresses.
Improvement of communication logs size.
Addition of new functions, Improvement of usability, and
Corresponding to PowerLite 6100i.
EMP NS Connection V2.20 supports Windows Vista (Home
Basic / Home Premium / Ultimate / Business / Enterprise).
Supported 25 languages
Supported 27 languages
Addition of new Error Information
Supported Video (BNC)
Supported 34 languages
Additional Input Sources
Displays projector’s serial number in Menu settings
Page 4 of 4
PSB.2009.06.001
EPSON
Date:
PSB #:
Reference:
Product(s):
Subject:
PRODUCT SUPPORT BULLETIN
12/18/2008
Originator: DS
PSB.2009.01.006
Authorization:
TI 08-22e Rev. A/B
Total Pages: 7
PowerLite 735c / 737c / 745c / 755c / 765c / 835p
1705c / 1715c / 1815p / 1825p / 7850p / 8300i with EasyMP.net option
Pro G5150 / Pro G5350 / 1725 / 1735W
Release of Check Tool for Network Projectors V1.00 (for Windows)
This bulletin was created to inform you about the release of Epson Check Tool software
for Network Projectors version 1.00.
Description of Change:
First release of the Check Tool for Network Projectors for Windows
Reason:
The Check Tool for Network Projectors makes it possible to easily check whether
EPSON Quick Wireless Connection and EMP NS Connection’s Quick Connection mode
can operate on the users’ Windows PC properly. The Check Tool for Network Projector
can also be used as a reference check before the purchase of the projector or as a
troubleshooting Tool.
1) Function of the Application
Application
name
Check Tool for Network Projector V1.00
Notes
The Check Tool checks automatically whether EMP Quick
Wireless Connection and EMP NS Connection’s Quick
Connection mode can operate properly on the user’s Windows PC
in terms of the following four points:
1. Checks OS support.
• Checks whether the OS is supported by EMP Quick
Wireless Connection / EMP NS Connection.
2. Checks user account
• Checks user’s account for administrator privileges to
install EMP Quick Wireless Connection / EMP NS
Connection.
3. Checks the wireless LAN adapter
• Checks whether the wireless LAN adapter and
driver are installed on the PC.
• Checks whether the wireless LAN is active.
Page 1 of 7
PSB.2009.01.006
Notes
4. Checks wireless LAN switching
• Checks whether wireless LAN adapter is turned ON.
• Checks whether EMP Quick Wireless Connection
and EMP NS Connection’s Quick Connection mode
can set the SSID on the user’s PC when trying to
connect to a projector using EMP Quick Wireless
Connection and EMP NS Connection’s Quick
Connection Mode.
The Check Tool checks for communication conflict and whether it
can actually stop the utilities when both utilities--EMP Quick
Wireless Connection V1.00 and EMP NS Connection-- are both
installed on the users PC.
Page 2 of 7
PSB.2009.01.006
Notes
Output of the log file:
• The Check Tool records the result in a text file (log file).
Usually, the log file is saved under the name of
CheckInfoDATE.log in the directory where “EB_CHT.exe”
is stored
Limitations
•
When the Check Tool is checking the user’s PC, the user’s
PC drops off network.
•
The Check Tool does not check whether the firewall of
manufacturers of security software other than Windows
may be blocking EPSON Quick Wireless Connection/EMP
NS Connection.
2) Operating Environment
Check Tool for Network Projector V1.00
OS
CPU
Memory
Disk space
Display
Windows 2000 SP4 Rollup1
/ XP Home Edition/ XP Professional(32bit) non-SP,SP1,SP2,SP3
/Vista SP1 Home Basic/Home
Premium/Ultimate/Business/Enterprise(32bit)
non-SP,SP1
Windows: Mobile Pentium III 1.2GHz at least (Pentium M1.6GHz
at least recommended)
256MB at least (Recommendation: 512MB at least)
20MB at least
Resolution: At least VGA(640 x 480) but no more than UXGA
(1600 x 1200)
At least 16 bit color
Page 3 of 7
PSB.2009.01.006
3) Location of download file: Check Tool for Network Projector V1.00
Download epson12794.exe from the Epson website (www.epson.com).
This is a self-extracting file; please follow the screen prompts to install the
Check Tool software.
4) Double-click the [EB_CHT.exe] icon
5) Read the contents of the [SOFTWARE LICENSE AGREEMENT], and click the
[Agree] button.
6) A dialog indicating the program is starting opens with the following message:
This tool cuts off the network connection temporarily.
Click the [Start] button to begin verification.
Page 4 of 7
PSB.2009.01.006
7) The Check tool dialog is displayed. It takes a few minutes for the results
of the verification are displayed
8) When two or more wireless LAN adapters are available on your computer, the
adapter selection dialog opens.
Select the wireless LAN adapter and press the OK button to continue.
Page 5 of 7
PSB.2009.01.006
9) When the verification is complete, the result is displayed on the bottom of the
dialog.
The result is stored in the same folder as the check tool.
File Name: CheckInfo<****>.log
**** indicates the created date and time.
[Exhibit 1]
Wireless LAN client list that NSC and Quick Wireless Connection stop their
service process
Manufacturer
Name
D-Link
Supported by
NSC V2.30
NETGEAR
BUFFALO
Adapter Name
Air Plus
XTREMEG
DWL-G650
WN511T
NETGEAR
Buffalo all
products
ThinkPad
products
ThinkPad
products
Logitec LANWAG/U2
Wireless LAN
Adapter
Wireless-G
Notebook
Adapter v.5.0
WG511AJP
NETGEAR
WGM511
NETGEAR
WPNT511
IBM
IBM
Logitec
Linksys
Page 6 of 7
PSB.2009.01.006
Wireless LAN Utility Name
D-Link AirPlus XtremeG Utility
(CD)
Smart Wireless Utility
Ver.1.1.5.9(CD)
Client Manager 3
Ver.1.2.10(Web)
Access Connection(Web) *1
Ver.4 or later
Access Connection(Web) *1
Ver.3.71
Logitec Wireless LAN Client Utility
WPC54G-JP setting utility
NETGEAR WG511A Smart
Wizard Ver3.2.3.306
NETGEAR SMART WIZARD Wireless Assistant WGM511 Ver
1.0.0.7
NETGEAR WPNT511 SMART
WIZARD Ver1.1.3.0
Linksys
WPC300N
Linksys
WPC54G
Manufacturer
Name
Linksys
Adapter Name
Linksys
WUSB54GP
Linksys
WUSBF54G
NETGEAR
WG511 v2
Linksys
WPC54GX
Supported by Linksys
NSC V2.40
Supported by Atheros
NSC V2.50 &
Quick
Wireless
Connection
V1.00
WPC54GX4
WUSB54GSC
Wireless-N Notebook Adapter
Wireless Network Monitor v1.05
Wireless-G Notebook Adapter
Wireless Network Monitor Ver 3.1
Wireless LAN Utility Name
Wireless-G Notebook Adapter with
SRX400 Setup Wizard V1.1
Wireless-G Portable USB Adapter
WLAN Monitor v1.05
Wireless-G USB Adapter with WiFi Finder
Wireless-G Notebook Adapter
With SRX Wireless Network
Monitor v. 1.2
Compact Wireless-G USB Adapter
Wireless Network Monitor v1.05
Atheros Client Utility
*1: Because Access Connection service stops, power display of Power Manager becomes
invalid.
Software Upgrade History Quick Wireless
Version
Release date
Remark
V1.00
August. 12, 2008 V1.00 release
Page 7 of 7
PSB.2009.01.006
EPSON
Date:
PSB #:
Reference:
Product(s):
Subject:
PRODUCT SUPPORT BULLETIN
09/17/2008
Originator: VS
PSB.2009.01.003
Authorization:
TI 08-29e Rev. A
Total Pages: 8
PowerLite 1735W, 735c, 737c, 745c, 755c, 765c, 835p, 1705c, 1715c, 1725,
1815c, 1825, 7850p, 7950p, 8300i with EasyMP.Net optional module,
Pro G5150 and Pro G5350 projectors
EMP SlideMaker2 updated Version 1.30 – provides scenario support for
WXGA
(1280 x 800) resolution
This bulletin was created to inform users about a software update for the EMP SlideMaker2 to
Version 1.30.
Description of Change:
Updated software release for creating scenarios in WXGA (16:10) format.
Reason:
• The updated version of EMP SlideMaker2 provides support for creating scenarios in
XGA (1024 x 768) resolution and WXGA (1280 x 800) resolution.
• It also provides the ability to select scenarios in XGA (4:3) or WXGA (16:10) format,
depending on the projector model used for the presentation.
Limitations:
• When creating a 16:10 scenario, the JPEG image must be in a 16:10 format.
• A 16:10 converted scenario can only be displayed with a WXGA (1280 x 800) projector.
• A 4:3 converted scenario can be displayed with a XGA or WXGA supported projector.
• When adding a PowerPoint slide from a thumbnail window to EMP SlideMaker2 with
Microsoft Office 2007, the scenario image file may deteriorate due to an issue with
Microsoft Office 2007 SP1.
1 of 8
PSB.2009.01.003
1) Selecting Aspect Ratio for the Projector being used:
a) Properties Window
b) Drag and Drop Window
2 of 8
PSB.2009.01.003
2) How to Verify the Aspect Ratio of the Scenario:
The resolution of the scenario is displayed in the window title of the Scenario Window and
Scenario Preview as shown below:
a) Scenario Window
b) Scenario Preview
3 of 8
PSB.2009.01.003
3) Location of download file: EMP SlideMaker2 updated Version 1.30
Download epson12812.exe from the Epson website (www.epson.com)
This is a self extracting file, please follow screen prompts.
After “Clicking” on the “Setup.exe” file, your will be prompted to:
4 of 8
PSB.2009.01.003
Select you language.
5 of 8
PSB.2009.01.003
Click “Next” at this screen.
6 of 8
PSB.2009.01.003
Click “Finish” to complete the installation.
7 of 8
PSB.2009.01.003
4) How to User the software: Please refer to the original documentation that came with your
Projector.
5) Operating Environment:
OS
Office
CPU
Memory
Disk space
Display
Windows 98/98SE/Me/ 2000 Professional/XP Home Edition SP4
/ XP SP1,SP2,SP3 Professional(32bit)
/ Vista non-SP,SP1 Home Basic/Home Premium/Ultimate
/Business/Enterprise(32bit)
Office2000、OfficeXP、Office2003、Office2007
At least Celeron 300MHz (Recommended: Celeron 400MHz or
above)
At least 64MB（Recommended: 128MB or above）
At least 50MB
At least SVGA（800×600） (Recommended: XGA(1024x768))
8 of 8
PSB.2009.01.003
EPSON
Date:
PSB #:
Reference:
Product(s):
Subject:
PRODUCT SUPPORT BULLETIN
11/13/2007
PSB.2007.11.005A
TI 07-63e, Rev. A
Epson EMP Monitor
EMP Monitor Version 4.21 Release
Originator: AP
Authorization:
Total Pages: 3
This bulletin was created to inform you of the release of Epson EMP Monitor version 4.21
utility.
New Functions and Improvements:
New Functions,
Improvements
Support for 25
languages
Supported Models
All projectors (see Supported
Projectors table)
Abnormally low air
flow notification
PowerLite 6100i / 6110i
Air flow sensor error
PowerLite 6100i (with firmware
version 1.10 or later) / 6110i
Clean air filter
notification
PowerLite 6110i
Supported Projectors:
This application supports the following Epson projectors:
Page 1 of 3
PSB.2007.11.005A
Function / Improvement
Description
Language support extended to
include Chinese (traditional),
Dutch, Danish, Polish,
Hungarian, Czech, Romanian,
Slovene, Norwegian, Swedish,
Finnish, Russian, Ukrainian,
Greek, Turkish, Arabic.
Languages supported in prior
version of EMP Monitor: English,
Japanese, French, German,
Italian, Spanish, Portuguese,
Chinese (simplified), Korean
Indicates an abnormal decrease
in the force of air flow through
the air filter. User should check
for air filter obstructions, clean
and replace air filter as
necessary.
This feature is available only for
the indicated models.
Indicates air flow sensor error.
This feature is available only for
the indicated models
User notification to clean air filter.
This feature is available only for
the indicated model.
PowerLite 735c
PowerLite 737c
PowerLite 745c
PowerLite 755c
PowerLite 765c
PowerLite 830p
PowerLite 835p
PowerLite 1705c
PowerLite 1715c
PowerLite 6100i
PowerLite 7800p
PowerLite 7850p
PowerLite 7900NL
PowerLite 8300i / 8300NL
PowerLite 8300i with the
EasyMP.net Option Module
installed
PowerLite 9300NL
PowerLite 1815p
PowerLite 822p
PowerLite 6110i
PowerLite Cinema 500
PowerLite 61p
PowerLite 81p
PowerLite 82c
PowerLite 821p
Supported Operating Environment:
Operating System requirement
Minimum CPU requirement
Minimum RAM requirement
Drive space requirement
Display requirements
•
Windows 98SE / Me / NT 4.0 SP6 (except
Ukrainian) / 2000 Professional / XP Home Edition
/ XP Professional (32 bit) / Vista Home Basic /
Vista Home Premium / Vista Ultimate (32 bit) /
Vista Business (32 bit) / Vista Enterprise (32 bit)
(except Arabic)
• Internet Explorer 5.0 or later
Pentium MMX 166 MHz (Recommended: Pentium II 233
MHz or faster)
At least 64 MB (Recommended: 128 MB or more)
At least 50 MB free
SVGA (800 x 600) or higher resolution, 32 bit color
display or higher
Obtaining the Update:
Download epson12456.exe from www.epson.com to get the version 4.21 update for EMP
Monitor. This file is a self-extracting archive and will start the installation utility for EMP
Monitor.
Page 2 of 3
PSB.2007.11.005A
Software History:
Version
3.00
3.01
3.02
Release Date
December 25, 2002
February 26, 2003
April 18, 2003
3.03
3.04
November 21, 2003
April 1, 2004
4.01
October 18, 2004
4.02
August 29, 2005
4.10
May 8, 2006
4.20
4.21
May 29, 2007
September 26, 2007
Notes
Added support for the PowerLite 735c
Added support for the PowerLite 7800p / 8300i
Added support for the PowerLite 7850p / PowerLite 8300i
with the EasyMP.net option module installed
Added support for the PowerLite Cinema 500
Added support for the Serial ↔ TCP/IP conversion
adapter for the PowerLite 61p / 81p
Added support for projectors installed on large scale
networks
Addition of timer function, auto search by specifying IP
address.
Improvement of communication logs sizes
Addition of support for PowerLite 6100i with support for
additional monitoring features unique to the PowerLite
6100i
Added support for Windows Vista (32 bit)
Increased language support to 25 languages
Page 3 of 3
PSB.2007.11.005A
EPSON
Date:
PSB #:
Reference:
Product(s):
Subject:
PRODUCT SUPPORT BULLETIN
09/25/2007
Originator: DJS
PSB.2007.09.001
Authorization:
TI 06-91e Rev. B
Total Pages: 5
PowerLite 755c / 765c / 835p / 1705c / 1715c / 1815p
EPSON Projector control for Win V.1.00 release
This bulletin was created to inform you on the release of the new Epson Projector Control
software version 1.00.
Description:
EPSON Projector Control lets you control the projector from your computer with a one-on-one
connection between your computer and the projector over a network. It allows you to perform
operations, such as turning the projector on/off and switching sources, from your computer
without using the projector’s remote control.
Function:
EPSON Projector Control has 2 modes: Advanced Mode and Simple Mode.
Although there is a difference in main display layouts between the two modes, their operation
procedures are almost the same. The difference is as follows:
Advanced Mode: Each source has each source button. Therefore source can be selected
by clicking each source button directly.
Simple Mode:
Source buttons are toggle-type. Therefore source can be switched every
time the toggle-type button is pressed.
[1] Advanced Mode
The main display is larger than that of Simple Mode. Each source has a source button,
so the source can be selected by clicking the applicable source button directly.
Page 1 of 5
PSB.2007.09.001
Button Functions
For Advanced Mode
Button
Power
Computer1
Computer2
EasyMP
Video
S-Video
A/VMute
Freeze
CC
Volume
Volume
[2]
Function
Turns the projector power on/off.
Switches the input source to the Computer1
input port.
Switches the input source to the Computer2
input port.
Switches the input source to EasyMP.
Switches the input source to the Video input
port.
Switches the input source to the S-Video input
port.
Turns the A/V Mute function on/off on the
projector.
Turns the Freeze function on/off on the
projector.
Displays the selection menu for Closed
Caption.
Select one of the following: "OFF," “CC1,” or
“CC2."
This function may not be available depending
on the projector models.
Turns the volume up on the projector.
Turns the volume down on the projector.
Switches between Advanced Mode and Simple
Mode.
Simple Mode
• You need to switch sources by using the toggle-type button but the main display is
simpler.
Page 2 of 5
PSB.2007.09.001
For Simple Mode
There is a difference in the following buttons between
Simple Mode and Advanced Mode.
Button
Computer
Video
Item
Register at startup
Projector IP Address
Monitor Password
OK
Cancel
Function
Switches the input sources among the Computer
input port, the Computer1 input port, the
Computer2 input port, and EasyMP.
Every time you click the button, the source
changes in the following order.
Computer input port or Computer1 input port->
Computer2 input port→ EasyMP-> Computer
input port or Computer1 input port…
Switches the input sources between the Video
input port and the S-Video input port.
Every time you click the button, the source
changes in the following order.
Video input port-> S-Video input port-> Video
input port
Function
Check this for EPSON Projector Control to start
up automatically when the computer starts.
Enter the IP address for the projector to be
connected. You need to do this only when you
make a connection for the first time or when
you want to change to another projector to be
connected.
Enter the Monitor Password that is set on the
projector. You do not need to do this when the
Monitor Password is not set on the projector.
Click this to reflect the setting changes that you
made. The setting screen is saved and closed.
Or
Click × on the title bar not to reflect the setting
changes.
Click this to abort the setting changes.
Page 3 of 5
PSB.2007.09.001
Settings Display
Uncheck the boxes for
the buttons that you do
not want to display in
Simple Mode.
Uncheck the boxes for the buttons
that you do not want to display in
Advanced Mode.
[3] How to set up EPSON Projector Control software
[Note] Be sure to set the projector to Network ON in Standby Mode in the Extended Menu.
1) Download “Epson12378.exe” from Epson website. This file contains
“ProjectorControlSetup.exe” which is used to install EPSON Projector Control for
Windows V.1.00 on the computer.
2) Set up your computer and the projector to connect over a network.
3) Start the EPSON Projector Control software as follows: “Start”Æ“Program”Æ“EPSON
Projector”Æ“Projector Control V1.00.” Then the main screen is displayed. Click
“Tool”Æ“Settings” on the main screen. The setting screen is displayed.
4) Enter the Projector IP Address, click “OK” to save, and close the setting screen.
Page 4 of 5
PSB.2007.09.001
Operation Environment
[EPSON Projector Control V.1.00]
Operation Environment:
OS
Windows 2000 SP4 / XP SP2 32-bit (Professional / Home) /
Vista 32-bit (Business / Enterprise / Home Basic / Home
Premium / Ultimate)
CPU
At least Pentium MMX 166MHz
(Pentium II 233MHz or later recommended)
Memory
At least 64MB
HDD space
At least 50MB
Display
SVGA (800×600) or higher resolution / At least 32-bit color
Additional Note:
Other Epson projector models supported:
PowerLite 6100i / 830p / 83c / 822p
Projector models not supported:
PowerLite 735c / 732c / 737c / 745c / 7800p / 7850p / 7900p / 8300i with the
EasyMP.net Option Module installed/ 9300i
Page 5 of 5
PSB.2007.09.001
EPSON
Date:
PSB #:
Reference:
Product(s):
Subject:
PRODUCT SUPPORT BULLETIN
8/30/2007
Originator: DS
PSB.2007.08.001
Authorization:
N/A
Total Pages: 1
Epson Projectors with an HD-15 VGA Analog/Component Input
Elmo HV-110XG Document Camera and Projector Compatibility
This bulletin was created to inform you of an operational issue with the Elmo HV-110XG
Document Camera when initially connected to an Epson projector.
Problem:
When attempting to use the Elmo HV-110XG Document Camera connected via the VGA HD15
connection to display content from its document bed. When connected to the projector, the
projector displays only the Blue Screen - No Signal message and will blink off and on or
display just the Blue Screen - No Signal message. When a computer is connected to the Elmo
HV-110XG Document Camera and switched to Pass-Through mode, the computer image is
displayed correctly by the projector. When switching back to the document table source of the
Elmo HV-110XG Document Camera, the problem returns. The Elmo HV-110XG Document
Camera puts out a Progressive Scan 20fps signal to the projector's VGA Analog port. This
signal is detected at 15 kHz Vertical and 291.8 kHz Horizontal frequencies which are beyond
projector sync specifications.
Solution:
With the Elmo HV-110XG Document Camera powered on and connected to the projector via
the VGA computer cable, access the Computer1/Computer2 setting in the projector menu
system and select the Component setting within the appropriate connection. This will allow
the Elmo HV-110XG Document Camera and projector to sync and the projector to display the
image of the document camera bed and its contents. However, the image will have a pink
cast. To eliminate the pink cast, change the projector setting from Component to RGB then to
Auto and exit from the menu. The projected image will now look normal. This will now allow
the Elmo HV-110XG Document Camera to sync and display the image properly to any other
connected Epson projector without having to change the projector settings.
Page 1 of 1
EPSON
Date:
PSB #:
Reference:
Product(s):
Subject:
PRODUCT SUPPORT BULLETIN
04/20/2006
Originator: AP
PSB.2006.04.002
Authorization:
TI 05-95e Rev. A
Total Pages: 1
PowerLite 735c / 737c / 745c / 755c / 765c / 835p / 7850p
Animation converter issue found with EMP SlideMaker2 version 1.12
This bulletin was created to inform users of the EMP SlideMaker2 version 1.12 software of a
problem converting certain animations from Microsoft PowerPoint into a Scenario file.
Details:
In the previous EMP SlideMaker2 version 1.11, certain PowerPoint animations were supported
in the Scenario files which are created by EMP SlideMaker2. Table 1 shows the list of
animations supported in EMP SlideMaker2 version 1.11:
Table 1
- Fly
- Crawl
- Spiral
- Swivel
- Blinds
- Dissolve
- Split
- Wipe
- Box
- Peek
- Stretch
- Zoom
- Checkerboard
- Random Bars
- Strips
Table 2 shows the list of animations from Table 1 that will not be ported from PowerPoint into
the Scenario file by EMP SlideMaker2 version 1.12:
Table 2
- Crawl
- Spiral
- Swivel
- Peek
- Stretch
- Zoom
Countermeasure:
If it is necessary to use these animations in the Scenario files, use EMP SlideMaker2 version
1.11. Versions of EMP SlideMaker2 subsequent to version 1.12 are expected to incorporate
the animations shown in Table 1 above.
EMP SlideMaker2 version 1.11 may be downloaded at www.epson.com. Download
epson10855.exe to get this version of the software.
If it is not necessary to use these animations listed in Table 2 above, continue to use the EMP
SlideMaker2 version 1.12. Download epson11217.exe at www.epson.com for EMP
SlideMaker2 version 1.12.
Page 1 of 1
PSB.2006.04.002
EPSON
Date:
PSB #:
Reference:
Product(s):
Subject:
Product Support Bulletin
May 11, 2005
VS
Originator:
PSB.2005.05.002
Authorization:
TI 04-45e Rev. D
6
Total Pages:
PowerLite 737c / 745c / 835p
Supported USB devices, memory cards, and LAN (wired and wireless) cards
Reason:
This bulletin is to inform you of the testing results for USB devices, memory cards for
operation and functionality and supported wired and wireless LAN cards.
Models and firmware versions used in the evaluation:
Firmware and Software versions
PW firmware version
IM-X firmware version
EMP Monitor version
EMP NS Connection version
PowerLite 745c
1.01
1.10
3.04
1.32
USB Device evaluation report:
1) Test Procedure:
a) Connect the USB device to be evaluated to the “USB type A connector” of the
PowerLite 835 and the PowerLite 745.
2) Test response:
a) The projector should detect the USB device or memory card when connected.
b) The EasyMP CardPlayer feature of the projector should function properly.
Evaluation results of USB devices and memory testing:
USB Device / Model
USB HDD
BUFFALO HD-P20U2/UC
I.O DATA HDPX-U20
I.O DATA HAD-iU80
Logitech LHD-PBB40U2
ADTEC AD-HDD2.5PU/20G
PowerLite 737c
/ 745c
PowerLite 835p
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Fail
Page 1 of 6
PSB.2005.05.002
BUFFALO HD-P40U2/UC
BUFFALO HD-P60U2/UC
I.O DATA HDPX-U40
I.O DATA HDMX-U40
Logitech LHD-PBB80U2
NOVAC NVHD260U
Alpha data AD-USB225HD
CENTURY CSZ25U2
Bus Link DL-60-U2
Apple iPod（Third Generation）15GB
Apple iPod（Fourth Generation）40GB
Apple iPodmini 4GB
Apple iPodPhoto 40GB
FREECOM FXD-XS
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Fail
Pass
Pass
Pass
Pass
USB MEMORY
I.O DATA EDP-512M
I.O DATA EasydiskLight
I.O DATA EDP2-256M
I.O DATA TB-B128
GreenHouse GH-UFD256SAP
GreenHouse GH-UFD64SAP
BUFFALO RUF-X256M/U2
BUFFALO RUF-X1G/U2
BUFFALO RUF2-M128-S
BUFFALO RUF2-M256-R
Logitech LMC-128UD2
Princeton PFU-XS128
ADTEC AD-DSH256M/U2
HAGIWARA SYS-COM HUD-RW256J
HAGIWARA SYS-COM HUD-256PPJ
ADTEC AD-DSH2G/U2
LEXAR JumpDrive 256M
GreenHouse PicoDriver 1G
GreenHouse PicoDriver 512B
SanDisk Cruzermini 256B
SanDisk SDCZ2-128-780
BUFFALO Petit Driver2x 1G
BUFFALO Petit Driver2x 512B
BUFFALO Clip-Driver(USB2.0)128B
BUFFALO Clip-Driver (USB2.0)512B
BUFFALO Clip-Driver (USB1.1)128B
Logitech LMC-512UD2
Logitech LMC-2GUD2L
Creative NOMAD Mu V NX (MP3 player)
Rio SU40 (MP3 player)
Transcend JetFlash2.0 512MB
Pass
Fail
Fail
Pass
Fail
*3
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Fail
Pass
Pass
Pass
Pass
Pass
Pass
Fail
Pass
Pass
Pass
Page 2 of 6
PSB.2005.05.002
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Fail
Pass
Pass
Pass
Pass
Pass
Fail
Fail
Pass
Fail
*1
Pass
Pass
Pass
Pass
Pass
*2
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Fail
Pass
Pass
Pass
Pass
Pass
Pass
Fail
Pass
Pass
Pass
Transcend JetFlash2A 512MB
Pen Driver (mini) USB2.0 256M
SONY USM-32D
PNY P-RFD256U20-BX
Digital Camera
CASIO
Exilim EX-Z3
FUJIFILM
FinePixF401
FUJIFILM
FinePix50i
FUJIFILM
FinePixF700
KONICA
DigitalRevioKD-500Z
KYOCERA FinecamS5
MINOLTA
DiMAGE F300
MINOLTA
DiMAGE Xi
MINOLTA
DiMAGE Z1
NIKON
COOLPIX2500
NIKON
COOLPIX4300
OLYMPUS CAMEDIAX-2
OLYMPUS CAMEDIA C-730UZ
OLYMPUS CAMEDIA C-5060 Wide
Zoom
Panasonic DMC-FZ1
Panasonic LUMIX DMC-LC5
Panasonic LUMIX DMC-FX5
Pentax
Optio330GS
SANYO
XactiJ2
SHARP
ViewcamZ VL-Z7
SONY DSC-P72
SONY DSC-T1
Kodak DX 3500
Pass
Pass
Pass
*4
Pass
Pass
Pass
Pass
*4
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Fail
Fail
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Fail
Fail
Remarks:
*1. Depends on the memory size.
a) 256MB product failed the test.
b) 64MB product passed the test.
*2. Since the USB memory device is made of rubber, it is difficult to connect the USB memory card to the
projector. By using a USB extension cable between the USB memory card and the projector, the USB memory
card is read properly.
*3. If, during playback, the format of the USB memory card is in “FAT16”, the card is read properly. When the
format is “FAT32” during play back, the projector will stop playing the Scenario file.
*4. This device combines the USB memory with a card reader. The projector can read the USB memory, but can
not read the USB memory card from the card reader.
Note:
This evaluation was conducted to make sure that the USB devices listed above will function
normally with the PowerLite 745c and PowerLite 835p projectors.
Page 3 of 6
PSB.2005.05.002
Wireless LAN cards configuration:
The tested Wireless LAN cards are inserted into the PC and a wireless LAN connection (Ad
hoc mode) is made to the projector.
The tested Wireless LAN cards are inserted into the PC and a wireless LAN connection is
made to the projector using an access point (Infrastructure mode).
Items evaluated:
The following items were tested and confirmed to work in both Ad hoc and infrastructure
modes. (WEP is only supported in the infrastructure mode.)
All functions of EMP Monitor.
The following was tested in Infrastructure mode:
DHCP, ESSID and WEP can be setup by a browser and function properly.
WPA and LEAP works when implemented.
EMP NS Connection functions properly with the freeze, mute, zoom, and video input change
features.
Power Point slide show works.
Page 4 of 6
PSB.2005.05.002
Evaluation results for the Wireless LAN cards:
Wireless LAN card
3Com 3CRPAG175
3Com 3CRWE154A72
Buffalo WLI-CB-G54
Buffalo WLI-CB-AG54
Corega PCCL-11
Corega WLCB-11 V2
Corega WLCB-54GT
Corega WLCF11
D-Link DWL-G630
D-Link DWL-AG660
Hawking WE120P
Linksys WPC54G
Netgear MA401
Netgear MA521
Planex GW-NS11X
Planex GW-NS54G
SMC SMC2435W
SMC SMC2835W
ZyXel ZyAIR B101
Proxim 8480-WD
HAWKING WE110P+
VER10
NETGEAR WG511FS
D-Link DWL-G650
OLITEC CW-100G
PowerLite
835p
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
PowerLite
745c
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
PowerLite 745c
(WPA, LEAP)
Pass
Pass
Pass
Pass
Pass
Pass
Pass
-
PowerLite
737c
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
-
Pass
Pass
Pass
Wired LAN cards configuration:
Insert the wired LAN card to be tested into one of three projectors, connect the projector to a
hub and connected two PCs to the same hub.
Items evaluated:
The following items were tested and confirmed to work:
All functions of EMP Monitor.
DHCP can be setup using a browser and functions properly.
EMP NS Connection functions properly with the freeze, mute, zoom, and video input change
features.
Power Point slide show works.
Using EMP NS Connection, a PC can take control of a projector from another PC.
Page 5 of 6
PSB.2005.05.002
Evaluation results for the Wired LAN cards:
Wired Card name
3Com 3CFXFE575CT-JP
3Com 3CCFE574BT
3Com 3CXSH572BT
3Com 3CXFEM656C
Allied Telesyn AT-2800TX
Belkin F5D5020f
Corega FEther PCC-TXM
Corega FEther II CB-TXD
Corega FEther II PCC-TD
Come Once (Taiwan Card)
D-Link DFE-670TXD
D-Link DFE-690TXD
Hawking PN652TX
Hawking PN672TX
Intel PRO/100S
Linksys PCM100 ver. 2
Linksys PCMPC100 ver. 3
Planex FNW-3800-TX
SMC SMC8041TX
SMC SMC8041TX V. 2
SMC SMC8036TX
Surecom EP-427X
Xircom CE3B-100BTX
Xircom CBE2-100
PowerLite 745c
Pass
Pass
Pass
Fail
Fail
Pass
Pass
Pass
Pass
Fail
Pass
Pass
Pass
Fail
Fail
Pass
Pass
Pass
Pass
Pass
Fail
Pass
Fail
Fail
The following cards are NOT compatible:
3Com 3CXFEM656C
Allied Telesyn AT-2800TX
Come Once (Taiwan card)
Corega FEther CB-TXM
Hawking PN672TX
Intel PRO/100S
SMC SMC8036TX
Xircom CE3B-100BTX
Xircom CBE2-100
NOTE:
No EMI (electro magnetic interference) testing was done, only a functionality evaluation.
Page 6 of 6
PSB.2005.05.002
EPSON
Date:
PSB #:
Reference:
Product(s):
Subject:
Product Support Bulletin
March 8, 2005
PSB.2005.01.004A
TI 04-45e Rev. C
PowerLite 835p and PowerLite 745c
Supported USB devices and memory cards
Originator:
Authorization:
Total Pages:
VS
3
Reason:
This bulletin is to inform you of the testing results for USB devices and memory cards for
operation and functionality.
Models and firmware versions used in the evaluation:
Model
PowerLite 835p
PowerLite 745c
PW Firmware Version
V1.03
V1.11
EasyMP Firmware Version
V1.21
V1.21
USB Device evaluation report:
1) Test Procedure:
a) Connect the USB device to be evaluated to the “USB type A connector” of the
PowerLite 835 and the PowerLite 745.
2) Test response:
a) The projector should detect the USB device or memory card when connected.
b) The EasyMP CardPlayer feature of the projector should function properly.
Evaluation results of USB devices and memory testing:
USB Device / Model
PowerLite 745c
PowerLite 835p
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Fail
Pass
Pass
Pass
Pass
Pass
Pass
Pass
USB HDD
BUFFALO HD-P20U2/UC
I.O DATA HDPX-U20
I.O DATA HAD-iU80
Logitech LHD-PBB40U2
ADTEC AD-HDD2.5PU/20G
BUFFALO HD-P40U2/UC
BUFFALO HD-P60U2/UC
I.O DATA HDPX-U40
I.O DATA HDMX-U40
Logitech LHD-PBB80U2
NOVAC NVHD260U
Alpha data AD-USB225HD
Page 1 of 3
PSB.2005.01.004A
CENTURY CSZ25U2
Bus Link DL-60-U2
Apple iPod Third Generation 15GB
Apple iPod Fourth Generation 40GB
Apple iPodmini 4GB
Apple iPodPhoto 40GB
Pass
Pass
Fail
Pass
Pass
Pass
Pass
Pass
Fail
Pass
Pass
Pass
I.O DATA EDP-512M
I.O DATA EasydiskLight
GreenHouse GH-UFD256SAP
GreenHouse GH-UFD64SAP
BUFFALO RUF-X256M/U2
BUFFALO RUF-X1G/U2
Logitech LMC-128UD2
Princeton PFU-XS128
ADTEC AD-DSH256M/U2
HAGIWARA SYS-COM HUD-RW256J
ADTEC AD-DSH2G/U2
LEXAR JumpDrive 256M
GreenHouse PicoDriver 1G
GreenHouse PicoDriver 512B
SanDisk Cruzermini 256B
BUFFALO Petit Driver2x 1G
BUFFALO Petit Driver2x 512B
BUFFALO Clip-Driver(USB2.0)128B
BUFFALO Clip-Driver (USB2.0)512B
BUFFALO Clip-Driver (USB1.1)128B
Logitech LMC-512UD2
Logitech LMC-2GUD2L
Creative NOMAD Mu V NX (MP3 player)
Rio SU40 (MP3 player)
Transcend JetFlash2.0 512MB
Transcend JetFlash2A 512MB
Pen Driver (mini) 256M
SONY USM-32D
Pass
Fail
Fail
*3
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Fail
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Fail
Fail
*1
Pass
Pass
Pass
*2
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Fail
Pass
Pass
Pass
Pass
Pass
Pass
Digital Camera
CASIO
Exilim EX-Z3
FUJIFILM
FinePixF401
FUJIFILM
FinePix50i
FUJIFILM
FinePixF700
KONICA
DigitalRevioKD-500Z
KYOCERA FinecamS5
MINOLTA
DiMAGE F300
MINOLTA
DiMAGE Xi
MINOLTA
DiMAGE Z1
NIKON
COOLPIX2500
NIKON
COOLPIX4300
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
USB MEMORY
Page 2 of 3
PSB.2005.01.004A
OLYMPUS CAMEDIAX-2
OLYMPUS CAMEDIA C-730UZ
OLYMPUS CAMEDIA C-5060 Wide
Zoom
Panasonic DMC-FZ1
Panasonic LUMIX DMC-LC5
Panasonic LUMIX DMC-FX5
Pentax
Optio330GS
SANYO
XactiJ2
SHARP
ViewcamZ VL-Z7
SONY DSC-P72
SONY DSC-T1
Kodak DX 3500
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Fail
Fail
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Fail
Fail
Remarks:
*1. Depends on the memory size.
a) 256MB product failed the test.
b) 64MB product passed the test.
*2. Since the USB memory device is made of rubber, it is difficulty to connect the USB
memory card to the projector.
Using a USB extension cable between the USB memory card and the projector, the USB
memory card is read properly.
*3. When the format of the USB memory card is in “FAT16”, the card is read properly.
When the format is “FAT32”, during play back, the projector will stop playing the scenario
file.
Note:
This evaluation was conducted to make sure that the USB devices listed above will function
normally with the PowerLite 745c and PowerLite 835p projectors.
An EMI test was not conducted on the USB devices tested.
Page 3 of 3
PSB.2005.01.004A
EPSON
Date:
PSB #:
Reference:
Product(s):
Subject:
PRODUCT SUPPORT BULLETIN
10/08/2004
Originator: DS
PSB.2004.10.002
Authorization:
TI 04-46e Rev. A
Total Pages: 14
EMP NS Connection, EMP Network Manager, EMP Monitor,
EMP Multi Screen Adjustment, Cinema Color Editor, VCOM Driver
Evaluation results of Epson Projector PC applications tested in Windows XP
with SP2.
The purpose of this bulletin is to provide information on Epson PC projector applications tested
under the Windows XP SP2 (Service Pack2) environment.
Description:
Information is provided about the evaluation results and recommendations for Epson PC
projector applications functionality in Windows XP SP2 Firewall environment.
Reason:
Compatibility testing for functionality of EMP NS Connection, EMP Network Manager, EMP
Monitor, EMP Multi Screen Adjustment, Cinema Color Editor, VCOM Driver in the Windows
XP SP2 environment.
Results of Windows XP SP2 installation:
Installing SP2 on PCs did not disturb the installation of the above software applications.
Also, the application software can be installed on PCs where SP2 or earlier versions are
installed without any issues.
The information contained in the following pages provides details for executing the
applications in Windows XP SP2.
Page 1 of 14
PSB.2004.10.002
Executing the Software:
When executing the software noted below for the first time after SP2 installation completes,
the following security alert messages are displayed:
[EMP NS Connection]
Security alert screen (EMP NS Connection)
[EMP Network Manager]
Security alert screen (EMP Network Manager)
Page 2 of 14
PSB.2004.10.002
[EMP Monitor]
Security alert screen (EMP Monitor)
[EMP Multi Screen Adjustment]
Security alert screen (EMP Multi Screen Adjustment)
The Security Alert screen for EMP Multi Screen Adjustment is shown after clicking the
Auto button of Network or clicking the Add button after entering an IP address in the
IP Address box.
Page 3 of 14
PSB.2004.10.002
[Cinema Color Editor]
Security alert screen (Cinema Color Editor)
The functions of the three buttons displayed in the security alert screen are explained
below.
[Keep Blocking] --- Enables you to register a started application in the “Exceptions”
program of the Windows Firewall. The network port that the
application uses is blocked. By selecting this button once, this
security alert message will not be shown when starting the
application next time.
[Unblock] ------------- Enables you to register a started application in the “Exceptions”
program of the Windows Firewall and unblock the network port that
the application uses. By selecting this option once, this security alert
message will not be shown when starting the application next time.
[Ask me later]-------- When you want to select both buttons above or select either one
later, this button is selected. The started application is not registered
in the “Exceptions” program of the Windows Firewall and the
network that the application uses is not unblocked. However, when
restarting the application, the same security alert message is shown.
•
PC applications will work normally on Windows XP with SP2 if the “Unblock
Item” is selected when the security alert screen is shown.
For the detail operation information of each application, please refer to the following:
Page 4 of 14
PSB.2004.10.002
Operating Status Report
When selecting the Keep Blocking button, the security alert message is closed and the
main screen of each application is displayed.
[EMP NS Connection Application]
Port 3620 is necessary for searching for projectors. If this port is blocked, projectors are not
detected.
The other applications operate normally. However, there is a case that execution of
automatic search disables automatic detection. This occurs when projectors are registered
for automatic detection in EMP Monitor before installing SP2, then the registered projectors
may not be detected again after SP2 installation. Therefore it is recommended to select
Unblock in the security alert screen.
If “Keep Blocking” has been selected when starting the application for the first
time, and the blocking needs to be removed, complete the execution of the application and
proceed with unblocking as follows:
a.) Start the Windows Security Center. Double click the icon in the shape of a shield that
is always displayed on the taskbar after the installation of SP2.
Windows Security Center screen
b.) Select and start Windows Firewall
Page 5 of 14
PSB.2004.10.002
[Caution]
In case the check box
for Don’t allow
exceptions
is checked (this box is
not checked at the
initial setting), a
network port for
software is not
unblocked even though
the software is checked
on Exceptions.
Make sure this option is
not selected.
Windows Firewall screen
Page 6 of 14
PSB.2004.10.002
c.) Select the Exceptions tab and display exceptions program.
[Caution]
If this check box is
not checked, the
security alert
screen is not
displayed when
starting software.
•Exceptions screen
d.) Check the check boxes for the software you don’t want to block.
Page 7 of 14
PSB.2004.10.002
[EMP NS Connection] • Check EasyMP Software box
Unblock screen (EMP NS Connection)
Page 8 of 14
PSB.2004.10.002
[EMP Network Manager Application]• Check EPSON Projector box
Unblock screen (EMP Network Manager)
Page 9 of 14
PSB.2004.10.002
[EMP Monitor Application]→ Check EasyMP.net Software box
Unblock screen (EMP Monitor)
Page 10 of 14
PSB.2004.10.002
[EMP Multi Screen Adjustment Application]→ Check EPSON Projector Software for
Multi Screen box
Unblock screen (EMP Multi Screen Adjustment)
Page 11 of 14
PSB.2004.10.002
[Cinema Color Editor Application] ---> Check Cinema Color Editor.
Unblock screen (Cinema Color Editor)
By following the above procedure, the network port that each application uses is unblocked
and they can operate normally.
Page 12 of 14
PSB.2004.10.002
Corresponding program name to PC applications
PC Application
Program name
EMP NS Connection
EasyMP Software
EMP Network Manager
EPSON Projector
EMP Monitor
EasyMP.net Software
EMP Multi Screen Adjustment
EPSON Projector Software for Multi Screen
Cinema Color Editor
Cinema Color Editor
When selecting the Unblock button:
The Security Alert screen is closed and the main screen is displayed. Then the search result
is displayed.
When selecting the Ask Me Later button:
Port 3620 which is used by EMP NS Connection and is necessary for discovering projectors
is blocked, and projectors are not detected.
The other applications operate normally. However, there is a case where execution of
automatic search disables automatic detection. This occurs when projectors are registered
for automatic detection in EMP Monitor before installing SP2, the registered projectors may
not be detected after SP2 installation.
Page 13 of 14
PSB.2004.10.002
VCOM Driver
The following message is shown after the VCOM driver is installed on your PC.
Select “No, not this time” item and continue the Plug&Play of the device.
8.) Notes:
When you add the program to Exceptions list, the program can receive network
communication from outside. This may cause a security risk such as exposure to a virus
attack.
Page 14 of 14
PSB.2004.10.002