Download DITEC GLOBE Technical data

6. Assembling belt and chain
1
A
B
C
2
D
3A
E
F
A
E
F
3B
E
F
A
E
F
-Attach the belt or chain [A] to the transmission [B] and slide [C].
-Assemble the belt stop [D].
-Fasten the two ends of the belt [A] to the release pin [E] through the couplings [F] in the direction of the
pin, as shown in the figure.
-Fasten the two ends of the chain [A] to the release pin [E] through the couplings [F] in the direction of the
pin, as shown in the figure.
9
IP1839EN • 2012-07-31