Download QOLSYS IQ PANEL Installation manual

Transcript
TROUBLESHOOTING
MOVING THE PANEL
FIND IT
If, for ANY reason, you need to move the panel, be sure you have enough battery life to
keep the panel running while not connected to A/C power. If you do not, you must shut
down the panel’s operating system before disconnecting the power supply.
!
1.Select “Settings” from the home screen
2.Enter the installer or master code.
3.Select “Power Down”
IMPORTANT: Failure to perform these
4.Wait for panel LEDs to turn off
steps in the proper sequence may result in
5.Disconnect the power
data corruption and/or panel failure.
Settings
Power
Down
SUPPORT
?
QUESTIONS?
Contact us at [email protected]
QOLSYS CONFIDENTIAL AND PROPRIETARY
PAGE 81 OF 91
© 1/15/14 ALL RIGHTS RESERVED
Installer Code Access
Master Code Access