1
Download THRESHER User Manual
Transcript
5.2.4 LOAD CELL REPLACEMENT continued First remove the recessed screw. For this task a ¼ inch drive with an 8 to 10 inch extension will work the best and a flexible connection on the extension is also helpful. The screw is accessed by putting the extension in the position shown “between the frame and the idler wheel” behind the encoder as shown in the picture. Then attach a ratchet to the extension, loosen and remove the screw and remove the extension and socket. AMSLA595 THRESHER OCT 2013 Page 53 of 136
