Download Broadband Bandwidth Controller

8. QoS Configuration
Overview
The Router supports QoS, providing high quality of network service.
It will classify outgoing packets based on policies defined by users and provide better
response or performance to various real-time applications.
8.1
QoS Setup
The following web page management will guide you on how to setup QoS and make QoS
work.
Figure: QoS Setup
Settings – QoS Setup.
QoS Feature
8.2
•
Enable QoS –Checkbox allows users enable QoS
mechanism. If set to "enable" QoS. QoS will allocate
Inbound/Outbound bandwidth to pass through the device..
•
WAN Inbound / Outbound Bandwidth –This allows you to
set the maximum inbound or outbound bandwidth, maximizing
your network's performance. This information can be obtained
from your ISP.
•
Set Policy Button –Setting the policy can allocate
Inbound/Outbound bandwidth (based on your configuration) to
pass through this device.
QoS Policy
Setting the QoS policy can allocate Inbound/Outbound bandwidth (based on your
configuration) to pass through this device. You can define some policies which classify
received packets based on Local/Remote IP, MAC, port and protocol type. This feature is
useful when the WAN link is very busy or congested or when using special applications
50