Download User`s Guide

Viewing Patient Measurement Data (continued)
Activating the Analysis Tab
NOTE: New Ocular Response Analyzer systems may come pre-configured with the Analysis tab already
activiated. In this case, the instructions for unlocking the analysis tab on this page can be disregarded.
NOTE: The analysis tab of Ocular Response Analyzer version 3.0 software contains features that have not
yet been cleared by the US FDA. Access to these features cannot be provided to users in the USA.
Ocular Response Analyzer version 3.0 features an optional Analysis tab that will not appear by default. To
access these features, users must contact Reichert or an authorized distributor to obtain an unlock code.
To activate the analysis tab, go to the Tools
menu and click on Options. On the General
tab, click the Unlock KC Score Tool button.
A window with an installation ID will appear.
Note the Installation ID and provide this
information to Reichert or to your Reichert
Authorized Distributor to obtain the matching
unlock code.
Analysis Tab
Once activated, the Analysis Tab will
appear next to the Results and History tabs
in the software.
The data presented on this tab will only be
generated for measurements taken after the
installation of version 3.0 software.
If you have upgraded a pre-existing system
to version 3.0 software, the previously
acquired data will not be retroactively
updated to display the new indices provided
on the analysis tab. However, all of the
previous data will remain intact and will be
accessible.
24
13880-101 Rev. E