Download HD+ SC PVR

Video output:
This option selects to which output the video signalwill be sent to.
DVI
If you hav e connected your TV to the D\il output of your SATNUX set the
"Output type" option to DVI.
DVI-PC
If you hav e connected the TFT-Monitor of your PC to the D\il output of your
SATNUX set the "Output type" op tion to D\il and the "Mode" option to PC _
Searl
If you hav e conne cted your TV to the Scart output of your SA.TNUX set the
"Output type" option to Scart.
Use the Navigation-Buttonsl efVright to select the desired screen resolution. This option is only
available for the output type DVI.
Refresh Rate:(This optioni s only av ailable for the output typ es DVI)
Select the refresh rate supported by your TV sere en. This si either 50Hz or 60Hz.
0 isplav 4:3 content as:
Pillarbox
4:3 shows will be shown in full height on a 16:9 screen and you will have black bars on both sides.
Pan&Scgn
4:3 shows will be shown in full width on a 16:9 screen and a bit willbe cut off on the top and bottom.
Just Scale
4:3 shows will be shown in full height on a 16:9 screen and are stretched to fit the width of your
screen.
Nonlinear
Only the outer parts of the picture are stretched to prevent the centerfrom being distorted. You will
still have a full screen picture.
AC3 default:
If a pro gram is transmitted with anAC3 audio track (e.g. Dolby Digal).the SATNUX switches
automaticaly to this audio tra ck.
Volume control of ftC3 signals only works if ftC3 downmix is activ ated. Please ke ep in mind that ftC3
downmix will disable the output of real AC3 signals on ev ery audio out, even on the SIP DIF output
AC3 downmix:
If you're watching a show with a AC3 audio track it will be changed i1to a stereo signal. Set this option
to "ye s" if your have an AV-Receiver that does not support Dolby Digital.
- 69 -