1
Download System configuration
Transcript
CLI command interface The following table lists the CLI commands and description. Modes Access Method Exit Prompt Method About This Mode The user commands available at the user level are a subset of Begin a User EXEC session with switch> your switch. Enter those available at the logout or privileged level. quit. Use this mode to • Perform basic tests. • Display system information. The privileged Enter the Privileged EXEC command is the enable command switch# while in User Enter advanced mode. disable to Use this mode to exit. • Display advanced EXEC mode. function status • Save configuration Enter the configure Global command switch Configuration while in (config)# privileged EXEC mode. VLAN Enter the switch 24 To exit to Use this mode to privileged configure those EXEC parameters that are mode, enter going to be applied to exit or end your switch. To exit to Use this mode to
