Download "user manual"
Transcript
dCS Verona User Manual dCS Ltd Manual for Software Issue 1.1x August 2005 TYPICAL APPLICATIONS Using a Verona with an upsampling transport This is the simplest disc-only system using the Verona. The La Scala outputs DSD data whether you play SACDs or ordinary CDs. dCS Verona Master Clock WORD CLOCK OUTPUTS SPDIF OUTPUTS 1394 EXT. REF. IN SUC 1 POWER LINK 1 2 3 4 5 1 2 POWER ~ 3 44.1kHz Word Clocks dCS Verdi La Scala SACD Transport CAUTION: VISIBLE AND INVISIBLE LASER RADIATION. WHEN OPEN, DO NOT STARE INTO BEAM. RCA AES BNC CLASS 1 LASER PRODUCT TOSLINK CH2 CH1 1394 SUC IN SDIF POWER 1 WORDCLOCK LINK OUT DSD (SACD+CD) L R L OUTPUT LEVEL AES 1 AES 2 PUSH RCA1 A ST CH1 dCS Elgar Plus DAC SUC CH2 B POWER PUSH HIGH R RCA2 BNC TOSLINK DSD / SDIF 1394 LOW IN - WORDCLOCK - OUT L R R REC OUT L Balanced - or - Unbalanced Outputs Outputs To Power Amplifier or Preamplifier Figure 1 – Using Verona to clock a La Scala and an Elgar Plus do this: do this: do this: Connect up as shown in Figure 1. The first time you use this arrangement, open the menu and run the Factory routine on all three units. This sets the Verona to 44.1kHz. If necessary, use the Input button on the Elgar Plus to select the 1394 input. Open the Elgar’s menu and set the MS page to MS:Sync. It is as simple as that. Manual filename: Verona Manual v1.1x.doc English version Page 10 email: [email protected] web-site: www.dcsltd.co.uk