Download MEASUrement:MEAS? (Query Only)

Command Syntax
Waveform Mnemonics
In some commands, you can specify a waveform regardless of whether it is a
channel waveform, a math waveform, or a reference waveform. Specify such a
waveform as follows:
Symbol
Meaning
<wfm>
Can be CH<x>, MATH or REF<x>
Argument Types
The argument of a command may be in one of several forms. The individual
descriptions of each command tell which argument types to use with that
command.
Numeric Arguments
Many oscilloscope commands require numeric arguments. The syntax shows the
format that the oscilloscope returns in response to a query. This is also the
preferred format when sending the command to the oscilloscope though any of
the formats will be accepted. This manual represents these arguments as follows:
Symbol
Meaning
<NR1>
Signed integer value
<NR2>
Floating point value without an exponent
<NR3>
Floating point value with an exponent
Most numeric arguments will be automatically forced to a valid setting, either by
rounding or truncating, when an invalid number is input unless otherwise noted
in the command description.
2–8
TDS3000 & TDS3000B Programmer Manual