Download Sonifex Redbox Range User manual

1
MIXER & SOURCE SELEC TORS
System Block Diagram
Inputs
1
L
Remote
Start I/O
R
Push Button
Switches
Mix Mode
L
Remote
Start In
2
Front Panel
Inhibit
R
Audio
Inputs
MIXER & SOURCE SELEC TORS - RB -SS10
Remote Select/
Switch Inputs
Status
Outputs
MCU
Audio
Inputs
3-6
Input Gain
Stage
Outputs
Volume
x10
L
Audio
Inputs
7-10
Headphone
Outputs
R
L
Analogue
Switches
Outputs
R
Fig 1-2: RB-SS10 System Block Diagram.
Front Panel Indicators & Controls
Illuminated
Push Buttons
Power LED
Indication
Fig 1-3: RB-SS10 Front Panel.
Front Panel
Gain Controls
Underneath
Designation Strip
Headphone
Output
Volume
Control
Illuminated Push Buttons
The front panel contains 10 illuminated push buttons, used for selecting an analogue
source. The push button illuminates when the input is selected. The status of pin 12 on the
remote connector determines whether the unit is in the selector mode, or the mix mode.
When pin 12 is connected to 0V, mix mode is enabled.
In selector mode, one push of a button will select the desired analogue stereo source and
pushing the button again will turn it off.
2
Redbox User Handbook No 3