Download User Manual/Installation Instructions

Features
Professional
and Identification
Replacinq
and Premier Models
Iqnition
Batteries
Locating the battery: The battery is located in a sealed compartment on the left-hand side of the
control panel.
To change the battery:
1. Disengage the battery compartment by pushing the battery cover
up on Professional models and towards the front of the grill on Premier
models (as shown).
(Note: The directional
gage)
arrow
on the battery
cover
indicates
which
direction
to push and disen-
2. The battery compartment will disengage and protrude so that you may pull and remove the battery and battery compartment.
3. Pull and remove the battery and battery compartment completely.
4. With the battery compartment removed you may remove and replace
the 9-volt battery.
5. After inserting the 9-volt battery into the battery compartment, insert
the battery compartment into the battery compartment slot and gently
push with your index finger until it engages.
To change
light bulbs:
Remove the Glass Light Cover by grasping the
edge of glass and pry it off. It may be necessary to remove one screw. Pull the old bulb
straight out from socket, do not twist.
Replace with 12v, 5 watt bulb of similar pin type
socket design and always avoid touching the
glass of new bulbs.
NOTE: Use only pin style 12v. 5 watt bulbs.
13
Rev.
04/2005