Download PBM4

7. TECHNICAL SPECIFICATION
Input channels
Impedances
Equalization
DSP Section
Main Mix Section
Amplifier Section
Power supply
Microphone Input
Frequency response
Distortion(THD&N)
Gain
SNR(Signal to Noise Ratio)
Line input
Frequency response
Distortion(THD&N)
Gain
Microphone Input
Channel Insert return
All other inputs
Tape out
All other outputs
Hi shelving
Low shelving
A/D and D/A converters
DSP resolution
Type of effects
2.5kOhm
10kOhm or greater
1kOhm
120Ohm
+/-15dB@12kHz
+/-15dB@80Hz
24bit
24bit
HALL, ROOM, VOCAL, PLATE, STEREO DELAY
REV+DELAY, and REV+CHORUS combinations
Presets
Controls
16
16-position PRESET selector
CLIP LED
MUTE SWITCH with LED indicator
Fader 0 dB, channels muted: -85dBr (ref.: +4dBu)
Fader 0 dB, all input channels assigned and set to
UNITY gain: -81dBr(ref.: +4dBu)
+22dBu unbalanced, 1/4"jacks
+22dBu
150W RMS (Nominal power)
Noise(Bus noise)
MONITOR max out
FX Sends max out
Output Power
Frequency Response
Output Impedance
Main voltage
25HZ-20KHZ
8 ohm
USA/Canada
Europe
100 120V~, 60Hz
210 240V~, 50Hz
Dimensions
Net Weight
Shipping Weight
U.K./Australia
240V~, 50Hz
260 watts
100-120V~: T4A
21 0-240V~: T2A
216.5x143.5x152.5mm(LxWxH)(8.5"x5.6"x6")
9.5kg
11.34 kg
Volume
2.8CFT
Power Consumption
Fuse
Physical
Electronically balanced, discrete input configuration
10Hz to 55kHz, +/- 3dB
0.05% at +4dBu, 1kHz
30dB
>94dB
Electronically balanced
10Hz to 55kHz, +/- 3dB
0.05% at +4dBu, 1kHz
10dB
1.4kOhm
12