Download PDF - Adafruit Learning System

So lder
You will want rosin core, 60/40 solder.
Good solder is a good thing. Bad solder
leads to bridging and cold solder joints
which can be tough to find.
Click here to buy a spool of leaded
solder (recommended for
beginners). (http://adafru.it/145)
Click here to buy a spool of lead-free
solder. (http://adafru.it/734)
Multimeter
You will need a good quality basic
multimeter that can measure voltage and
continuity.
Click here to buy a basic
multimeter. (http://adafru.it/71)
Click here to buy a top of the line
multimeter. (http://adafru.it/308)
Click here to buy a pocket
multimeter. (http://adafru.it/850)
Flush Diago nal Cutters
You will need flush diagonal cutters to
trim the wires and leads off of
components once you have soldered
them in place.
Click here to buy our favorite
© Adafruit Industries
http://learn.adafruit.com/adafruit-menta-kit-mint-tin-arduinocompatible
Page 7 of 31