Download Nokia N93 User Guide - FCC Draft - QR-Code
Transcript
Make calls • Ensure that both the sender and recipient are registered to the UTMS network. If you invite someone to a sharing session and that person’s phone is turned off, or the person is not within UMTS network coverage, they do not know that you are sending an invitation. However, you receive an error message that the recipient cannot accept the invitation. Settings Person-to-person connection settings A person-to-person connection is also known as a Session Initiation Protocol (SIP) connection. The SIP profile settings must be configured in your device before you can use Video sharing. Setting up a SIP profile allows you to establish a live person-to-person connection to another compatible phone. The SIP profile must also be established to receive a sharing session. Ask your network operator or service provider for the SIP profile settings, and save them in your device. Your network operator or service provider may send you the settings over the air. If you know a recipient’s SIP address, you can enter it on your contact card for that person. Open Contacts from your device main menu, and open the contact card (or start a new card for that person). Select Options > Add detail > Web address. Enter the SIP address in the format 56 FCC DRAFT sip:username@domainname (you can use an IP address instead of a domain name). UTMS connection settings To set up your UMTS connection, do the following: • Contact your service provider to establish an agreement for you to use the UMTS network. • Ensure that your device UMTS access point connection settings are configured properly. For help, see ‘Connection’, p. 98. Share video To receive a sharing session, the recipient must install Video sharing and configure the required settings on their mobile device. You and the recipient must both be registered to the service before you can start sharing. To receive share invitations, you must be registered to the service, have an active UMTS connection, and be within the UMTS network coverage. Live video 1 When a voice call is active, select Options > Share video > Live. 2 The phone sends the invitation to the SIP address you have added to the contact card of the recipient.