Download USER`S MANUAL

9.Insert the wires into the Left Upright (89) as you
set the handrail assembly on the Left and Right
Uprights (89, 90). Be careful not to pinch the
wires.
9
Handrail
Assembly
Wires
Attach the handrail assembly with the four 3/8" x
2" Bolts (3) that you removed in step 6 and four
3/8" Star Washers (12). Start all four Bolts, and
then tighten them.
12
12
3
3
89
90
10.With the help of a second person, hold the console assembly near the handrail assembly. Be
careful not to pull on the wires during
assembly.
10
Console
Assembly
Connect the Handrail Wire (86) and then the
Pulse Wire (88) to the wires from the console.
The connectors should slide together easily and snap into place. If they do not, turn
one connector and try again. IF YOU DO NOT
CONNECT THE CONNECTORS PROPERLY,
THE CONSOLE MAY BECOME DAMAGED
WHEN YOU TURN ON THE POWER.
Metal
Bracket
Console
Wire
Set the metal bracket on the console assembly
onto the metal frame inside the handrail assembly. Be careful not to pinch the wires.
Console
Wire
86
88
ttach the console assembly with two 3/8" x
A
2 1/2" Screws (4) and two 3/8" Star Washers
(12). Start both Screws, and then tighten
them.
12
4
11
12
4
Handrail
Assembly