Download Instruction Manual SyCore / PC104 - Manual Release

User Manual SyCore
9.9.5.3. DATA:POINTER
This command is required for the adjustment of the destination pointer or the source pointer
of the binary data. The address of the memory range of oscillator cards >1kB can be
calculated according to the following formula:
Address = (Phase number – 1) * total memory of the oscillator card / 4
For 1kB oscillators always the address 0 is used.
Execution time: approx. 20ms
Group
Interface
Syntax
Syntax : DATA:POINTER <INT1>,<INT2>
Arguments
<INT1> is the segment address
Range: 1 = Oscillator memory
<INT2> is the offset address
Range: 0-2097151(2^20*2).
Return
-Example
DATA:POINTER 1,0
With this command the segment address is adjusted to the oscillator and the offset address to
Page 0.
9.9.5.4. DATA:WRITE
This command is required for the Transfer of the binary date from the IEEE buffer to the
destination pointer (DATA:POINTER).
Execution time: approx. 100ms per 1k
Group
Interface
Syntax
Syntax : DATA:WRITE
Arguments
Return
-Example
DATA:WRITE
With this command the binary data are transferred from the IEEE buffer to the destination
pointer.
16.07.2013 E_SYC_V6_11.doc
Spitzenberger & Spies GmbH & Co. KG
Page 128