Download eRide Serial Interface Protocol (eSIP)

eRide Serial Interface Protocol (eSIP)
User’s Manual - OPUS III ezRide
13)
eTM000001
May 14, 2007
Revision 1
M – Manual Input, S – Simulator, N – Data Invalid
Checksum
4.6
ZDA – Time & Date
UTC, day, month, year and local time zone
1
2 3 4
5 6 7
|
| | |
| | |
$GPZDA,hhmmss.ss,xx,xx,xxxx,xx,xx*hh<CR><LF>
Field Number:
1)
UTC Time, e.g. 024611.08
2)
UTC Day, (01 to 31)
3)
UTC Month (01 to 12)
4)
UTC Year (4 digits, i.e. 2007)
5)
Local Time Zone Hours offset from UTC [not supported]
6)
Local Time Zone Minutes offset from UTC [not supported]
7)
Checksum
5
Standard NMEA Inputs
The PVT application supports the GPQ NMEA sentence query. This command allows a single NMEA
sentence to be requested. The module will respond with a single transmission of the specified sentence.
5.1
GPQ – NMEA Sentence Query
• Format: $GPGPQ,type*cks
type –
Three-letter designation for sentence being requested. Valid values are GGA, GLL, GSA,
GSV, RMC and ZDA
• Examples:
Preliminary and confidential
Page of 16
$GPGPQ,GGA*3C
$GPGPQ,GSV*3F
Request the GGA sentence
Request the GSV sentence
Copyrights: ® 2007, eRide Inc.
Disclaimer: The content of this document are subject to change without notice. Customers are advise to consult with eRide sales representatives before ordering.
The information and circuit diagrams in this document are presented “as is,” no license is granted by implication or otherwise