Download Arri Alexa XT

Warning and Error Messages
Mirror shutter phase error
Appendix 261
ALEXA Studio only.
Mirror shutter continuosly not in
phase with sensor. If rebooting
does not solve the problem,
contact ARRI service.
Mirror shutter: Cannot reach
sync speed
ALEXA Studio only.
No M head detected. Reboot.
ALEXA M was booted without
head connected. Connect head
and reboot camera.
Fibre Connection Error
Fibre connection between
ALEXA M head and backend
could not be established or has
terminated. Check and clean
connection, then reboot.
M head: Low power
The power level of the ALEXA M
head is critical. Make sure power
supply can deliver at least 40 W
of power. Check if power
warning levels are set correctly.
M head: Temperature high
The temperature of the ALEXA
M head is too high. Apply
additional cooling to prevent
automatic shutdown.
M head: Fan error. Contact
service.
The fan of the ALEXA M camera
head is defect. If replacing the
fan does not solve the problem,
contact the camera service.
Mirror shutter continuosly not
reaching sync speed. If
rebooting does not solve the
problem, contact ARRI service.
If any error that requires rebooting continues to occur regularly, contact
the ARRI service.