Download Operating and Installation Instructions Coffee System CVA 4062

Filling water, beans or ground coffee
Before using the coffee system for
the first time, clean the appliance.
See "Cleaning and Care".
Be sure to program the water
hardness (see "Settings - Water
hardness").
Filling the water tank
^ Pull the water tank out.
The beans and the water quality is
important for a good espresso or
coffee. The water tank must be washed
and filled with fresh cold drinking water
before each day of use. The unit
displays a reminder when turned on.
^ Fill the container with fresh, cold tap
water to the "Max." mark.
Never add hot water or any other
liquids except cold water to the
water tank.
Do not use mineral water. Mineral
water leads to heavy calcium
built-up in the machine that can
damage the unit.
The valve on the water tank ensures
that water cannot leak out.
^ Close the lid and push the water tank
into the unit until it clicks into place.
The water tank must be positioned
correctly or the valve will leak. If the
water tank has not clicked into
place, pull the tank out, check and
clean the niche.
^ Open the appliance door.
13