Download addendum 3

Sturgis Library Renovations
Kennesaw State University
Kennesaw, Georgia
mcmillan | pazdan | smith architecture
MPS Project No. 013328.00
SECTION 23 73 13 - MODULAR INDOOR AIR-HANDLING UNITS
PART 1 - GENERAL
1.1
RELATED DOCUMENTS
A.
1.2
Drawings and general provisions of the Contract, including General and Supplementary
Conditions and Division 1 Specification Sections, apply to this Section.
SUMMARY
A.
1.3
This Section includes constant-volume, modular air-handling units with coils for indoor
installations.
SUBMITTALS
A.
Product Data:
following:
1.
2.
3.
4.
5.
6.
7.
B.
For each type of modular indoor air-handling unit indicated.
Include the
Certified fan-performance curves with system operating conditions indicated.
Certified fan-sound power ratings.
Certified coil-performance ratings with system operating conditions indicated.
Motor ratings, electrical characteristics, and motor and fan accessories.
Material gages and finishes.
Filters with performance characteristics.
Dampers, including housings, linkages, and operators.
Shop Drawings: Signed and sealed by a qualified professional engineer.
1.
2.
3.
Design Calculations: Calculate requirements for selecting vibration isolators and seismic
restraints and for designing vibration isolation bases.
Vibration Isolation Base Details:
Detail fabrication including anchorages and
attachments to structure and to supported equipment. Include auxiliary motor slides and
rails, and base weights.
Wiring Diagrams: Power, signal, and control wiring.
C.
Coordination Drawings: Submit with Shop Drawings. Show mechanical-room layout and
relationships between components and adjacent structural and mechanical elements. Show
support locations, type of support, and weight on each support. Indicate and certify field
measurements.
D.
Field Quality-Control Test Reports: From manufacturer.
INDOOR MODULAR AIR HANDLING UNITS
23 73 13 - 1