Download ADS1000 v1.5eng.user..

TRIGGER
(edge)
Type
edge
Source
Slope
CH1
Rising
Mode
Coupling
TRIGGER
(pulse)
TRIGGER
(Video)
TRIGGER
(Slope)
TRIGGER
(Alternative)
122
Auto
LEVEL
Type
DC
0.00V
pulse
Source
When
CH1
=
Set Pulse Width
Mode
Coupling
Type
1.00ms
Auto
Source
Polarity
Ch1
Normal
SyncAll
Lines
Standard
Mode
Type
NTSC
Auto
Slope
Source
Time
CH1
1.00ms
Auto
Mode
Type
Source
Mode
Coupling
Digital Storage Oscilloscope
APPENDIX D:
DAILY MAINTAIN AND CLEANING
DC
Video
Alternative
CH1
Edge
Daily Maintain
DO not store or leave the instrument in where the LCD display will be exposed to
direct sunlight for long periods of time.
CAUTION: To avoid damage to the instrument or probes, do not expose them to
sprays, liquids, or solvents
Cleaning
If this instrument requires cleaning, disconnect it from all power sources and clean
it with a mild detergent and water. Make sure the instrument is completely dry before
reconnecting it to a power source.
To clean the exterior surface, perform the following steps:
●
Remove loose dust on the outside of the instrument and probes with a
lint-free cloth. Use care to avoid scratching the clear plastic display filter.
●
Use a soft cloth dampened with water to clean the instrument. Use an
aqueous solution of 75% isopropyl alcohol for more efficient cleaning.
Note
1. To avoid damage to the surface of the instrument or probes, do not use any
abrasive or chemical cleaning agents.
DC
Digital Storage Oscilloscope
123