Download mGuard-Handbuch 7.0 - Innominate Security Technologies AG

mGuard 7.0
6.9.2
SEC-Stick connections
SEC-Stick >> Connections >> SEC-Stick connections
SEC-Stick connections
List of the defined SEC-Stick connections. If you want to add a new connection,
click on the downwards arrow on the top left. You can edit an existing connection
by clicking the Edit button.
Not all the functions of the SEC-Stick can be configured using the web
interface of the mGuard.
Enabled
The Enabled switch must be set to Yes for a defined SECStick connection to be used.
User Name
A SEC-Stick connection with a uniquely assigned user name
must be defined for every owner of a SEC-Stick who has
authorized access. This user name is used to identify the
defined connections.
Name
Name of the person.
Company
The name of the company.
After clicking on the Edit button, the following page appears:
General
SSH Port Forwarding
6-192
INNOMINATE
Enabled
As above
User Name
As above
A descriptive name of
the user
Name of the person. (Repeated)
Company
As above
SSH public key
(including ssh-dss or
ssh-rsa)
Here you must enter the SSH public key belonging to the
SEC-Stick in ASCII format. The secret equivalent is stored on
the SEC-Stick.
List of the allowed access and SSH port forwarding relating to the SEC-Stick of
the corresponding user.
IP
IP address of the computer to which the access is allowed.
Port
Port number to be used when accessing the computer.
7961_en_00