Download TELE-Network

Transcript
Operating instructions Tele-Network
9.4.10 Voltage Connection
For the voltage supply of the TELE-BOOK-device, either the provided plug-in power
supply or the existing power supply of 24V/DC ±20% with at least 625mA current is
connected to the green 3pin plug. The device can be switched on/off with the power
switch on the front side, so you don’t have to unplug/plug the green power connector.
So, as you can see the TELE-PROFessional on the picture, we have from up to
down following pinning:
+24V DC
PE
PE must be connected allways!
0V
© 2003 - 2011 by PI + TIS
155