Download FlexDSL ORION 2(+)

User Manual
LTU Orion 2
6 SERVICE INSTRUCTIONS
6.1
General requirements
•
Before unpacking, check if the packing box is intact and if the equipment model is consistent
with that specified in the purchase contract.
•
Before starting operating the device, read carefully the present technical description and
service instructions. Remember that the guarantee and the free-of-charge repair will not be
granted under the following conditions:
a)
b)
if the device or any of its parts fails due to improper installation, testing or operation.
demages resulting from:
1) misuse and improper installation, including but not limited to:
- to use the product for its normal purpose or in accordance with the instructions on
the proper use and maintenance,
- installation and use of the product in a manner inconsistent with technical or safety
standards in force in the country where it is used, as well as the connection of the
device to the power supply source, other than required by the technical or safety
standards,
2) maintenance or repair performed by unauthorized service centers and dealers;
3) operation of a malfunctioning device;
4) accidents, lightning strokes, flooding, water, fire, improper ventilation, voltage
drops, ingress of moisture and insects inside the equipment as well as other reasons,
for example, electromagnetic and other interferences which are beyond the Supplier
control and do not correspond to technical conditions;
5) transportation except for the cases, when shipping is performed by an authorized
dealer or a service center;
7) defects of the system into which this product is incorporated.
•
The equipment should be powered from a primary DC source (38 … 72 V) with the
grounded “+”.
•
Environment requirements:
•
Temperature: from -5 to +45 °C;
Relative air humidity: from 5% to 85% at +25 °C.
It is strictly prohibited:
a)
b)
c)
to alter, delete, remove or make illegible the serial number of the device;
to adapt, adjust and change the equipment in order to improve it or extend its
applications without the prior written consent of the Supplier;
to alter or adjust the equipment without the consent of the Supplier.
105