Download FlexDSL ORION 2(+)

Transcript
User Manual
LTU Orion 2
4.6.5.3 <MASTER ON/OFF [N = 1..4]> command
The <MASTER ON/OFF N> activates/deactivates the «MASTER» mode on the interface with
the number N.
For single-channel modems, the command is used without the number of the xDSL channel.
Note:
In the data transmission systems one device should be configured as a Master
device, while the other – as a Slave device.
For example:
RR_CM>MASTER ON 2
4.6.5.4 <EXT ON/OFF [N = 1..4]> command
The EXT ON/OFF N command activates/deactivates the standard and the extended G.SHDSL
mode on the interface with the number N.
Note:
The EXT ON feature needs a special LICENSE that has to be ordered together with the unit.
In extended mode higher data rates and line codes (PAM4, PAM8, PAM32, PAM64) are
available.
Standard mode
Command
Channel Coding
Min Baserate
Max Baserate
PAM 16
PAM 16
3
60
PAM 32
PAM 32
12
89
Extended mode
PAM 4
PAM 4
2
35
PAM 8
PAM 8
3
71
PAM 16
PAM 16
1
119 (106)
PAM 32
PAM 32
1
159 (142)
PAM 64
PAM 64
2
199 (178)
PAM 128
PAM 128
4
238 (not available)
Please NOTE:
The values in the braces are for Model that have no ++ in the Hardware Version (HW 1.8++)
4.6.5.5 < MASTER ON/OFF N command
CO_01_CM>The < MASTER ON/OFF N > activates/deactivates the «MASTER» mode on the
interface with the number N.
For single-channel modems, the command is used without the number of the xDSL channel.
Note:
In the data transmission systems one device should be configured as a Master
device, while the other – as a Slave device.
For example:
RR_CM>MASTER ON 2
83