Download FA162C User Manual
Transcript
ARMING ALL PROTECTION (With Entry Delay ON) 2-Partition AWAY Arming (Continued) To arm both partitions, first make sure both partitions are READY TO ARM. AWAY 1. + 2 (Master Code) 2. ARME D ** AWAY ** YOU MAY E XIT NOW The "You May Exit Now" portion of the message disappears when the exit delay expires. AWAY + 2 ENTER MASTER CODE THEN PRESS AWAY TWICE Example: 7 2 9 6 and press the AWAY key, then press the AWAY key again. The first press of AWAY arms the local partition, the second press of AWAY arms the other (remote) partition. The “Armed Away” display should appear, and remain displayed (with exit warning beeps, if programmed) throughout the exit delay period if both partitions were successfully armed AWAY. The red ARMED indicator should also light. If the “READY TO ARM” message re-appears when the second AWAY key press is made, both partitions have failed to arm due to an open zone in the remote partition. If the remote partition is not ready to arm, neither partition will arm when using this particular procedure . – 18 –