Download View - Synchro Arts

10) When the alignment looks satisfactory, the user can generate the Aligned Audio by pressing
Process. This creates the Aligned audio into a file on the disk and the Process button will
also “grey out” indicating the user cannot press it again until changes are made to the
settings or signals.
11) To hear the Processed audio for this example, select All and GA in the Preview Control, and
click the Preview button to hear the Guide and Aligned signals together. Select A to hear
the Aligned audio on its own.
12) If the alignment is satisfactory, select a destination track (e.g. “Aligned” in this example) and
click Spot to send the Aligned audio automatically to the correct time position and destination
track in Pro Tools.
13) If the alignment does not look or sound satisfactory, there are several options:
a) Select another Setting or Alignment mode (which will clear the aligned trace and reset
the Align and Process buttons), click Align again, and examine the results.
b) Adjust the "leader" audio before the start of the Guide and Dub to be roughly equivalent
with the Dub "leader" being somewhat longer.
c) Insert Sync Points at points of misalignment (see section J).
d) Reselect and recapture the Guide or Dub audio in Pro Tools, if the selection is thought to
be causing the problem.
VocALign_PRO_PT AAX Manual V6-1.doc
21