Download Anti-Lock Braking System Training Program
Transcript
ATC Diagnostics ATC Valve Pinpoint Test In order to find the location of a fault, tests can be performed on the component suspected to be faulty. Resistance can be measured across the ATC valve solenoid connector terminals. Resistance should be between 8 and 14 ohms. ATC Valve Solenoid Pins If the resistance is greater than 14 ohms, clean the electrical contacts and check the resistance again. To check the cable and ATC valve resistance as one unit, measure resistance across the pins on the ECU connector harness as called out in the ABS Maintenance Manual. 3-18