Download DISHWASHER

EN
2.7
Additional Cooling Function (Optional)
This function can only be enabled if the machine is installed with the optional "Additional
Cooling" function.
Machine ON. Press the button "K" for at least 3 sec.
After the hot rinse is completed, an additional fresh-water rinse can be made.
During the wash cycle or manual draining the type of rinse selected cannot be changed.
The Additional Cooling selection is displayed with the decimal point of the second
display lighting up.
Note: The Additional Cooling selection is not memorised and must be set every time
the machine is switched off and then on again (if this function is required).
page 35