Download Personalize `N Stitch

Transcript
80
PERSONALIZE ‘N STITCH
Instruction Manual
can add more major grid lines as well as a minor grid. You can
increase the spacing values for the minor grid; however, zero
and negative spacing values are not supported. The minor grid
can also have different horizontal and vertical spacing values.
To make grid lines more visible on particular backgrounds, you
can change the color of the major and minor grids. You should
choose separate colors for each grid type.
You can also choose to display a full grid or only the grid
crosshairs in the design window.
To define grid settings:
1
Do one of the following:
2
Right-click on the rulers at the left or bottom of the
window and click Grid Settings. If the rulers are not
already visible in the design window, choose View—
Guide Rulers.
You see the Grid Settings dialog.
Š Choose Tools—Options. From the Options dialog, click
the Grid tab.
In the Grid Minor area, complete the following:
3
In the Horizontal spacing box, enter the measurements
for horizontal spacing in millimeters or inches.
Š In the Vertical spacing box, enter the measurements for
vertical spacing in millimeters or inches.
Š From the Color list, select a predefined color to use for
the minor grid. If you want to choose from a larger
selection of colors, click Custom from the color box.
In the Grid Major area, complete the following:
Š
Š
Š
Š
In the Horizontally Every (lines) box, enter how often you
want horizontal lines to be highlighted in the major grid.
For example, if you enter 3 in this box, every third
horizontal line will be highlighted in the major grid.
In the Vertically Every (lines) box, enter how often you
want vertical lines to be highlighted in the major grid. For
example, if you enter 5 in this box, every fifth vertical
line will be highlighted in the major grid.