Download ThankYou! \
Transcript
oFF
I
SetStored Channel
go16 [r'ro0 ano
@ to switch power on. LCD screen
[D, f-CO screen shows*CH-1 ".
1. Select Channel Number
@)lml
to select your needed channel, you can select
ranges from 1 -199.
2. Set Receive Frequency
Press @ to set receive frequency. Press
@ *o select whether
setting receive frequency of current channel. lf you want to delete
curret channel, you can pre". @, LCD screen shows,,-----",then press @ ,o confirm,now this channel is deleted. Radio
go to delete next channel.
You can also input 6 digital numbers,then pre""
then radio enters to receive signa programming.
You calso can press
@m
change current frequency. Press
(D
to confirm,
to change frequency step to
@
switch current frequency
step(sMOK/1 2.5K/2OK/25K/3OK/5OK). Press {D to confirm
and tner to receive signal programming.
ao
3. Set Receive Signal
When you enter this option,LOD screen shows(3 OFF), press
@ ao select your needed signal type, then press @m
to select your needed group of receive signal, press (F, to
confirm.
lzt
67.0
d 023N
--->OFF
When you select DQT signal, you can press
DCS N
shows"SELF", then press
ersess
@@@
+
+
@
+DCS
@
to adjust.
I
4. Set Transmit Frequency
Please refer to "Set Receive Frequency".
5. Set Transmit Signal
Please refer to "Set Receive Signal".
6. Set Busy Channel Lock
eress
@)[
press(Dto
lto select
OFF,WAVE Lock or CALL tock, then
confirm.
7. Set Add/Delete Scan Function
@)[F]l
itDto confirm
eress
to select Add or Detete scan function,then press
8. Set High/Low Power
ryS. @[El
@
to select High or Low power function,then press
to confirm.
9, Set Channel Name
You can set channel name with five digital names, press
to select letter, then pr""" @ to next tetter,press
@m
fo
delete
front letter,then pr""" [D to confirm. Now
@
current channel is programmed, and radio enters to next
programming channel.
221