Download User`s Manual
Transcript
4. Each Component Function DIO CX-100n-DC5311-C02 features digital I/O. This function is compatible with that of CONTEC's DIO-1616L-PE. Pin Assignments of digital I/O connector Common plus pin for +2/+3 output port +3 port (Output) +2 port (Output) Common minus pin for +2/+3 output port OP 2/3 37 19 N.C. O-37 36 18 IP 0/1 O-36 35 O-35 34 17 I-17 16 O-34 I-16 33 15 I-15 O-33 32 14 I-14 O-32 31 13 I-13 O-31 30 12 I-12 O-30 29 11 I-11 O-27 28 10 I-10 O-26 27 9 I-07 O-25 26 8 I-06 O-24 25 7 I-05 O-23 24 6 I-04 O-22 23 5 O-21 22 O-20 21 ON 2/3 20 Connector used : 37 19 20 1 I-03 4 I-02 3 I-01 2 I-00 1 ON 2/3 Common plus pin for +0/+1 input port +1 port (Input) +0 port (Input) Common minus pin for +2/+3 output port 37pin D-SUB connector [F (Female) type] DCLC-J37SAF-20L9E [mfd.by JAE] or equivalence to it Connector pin assignment is compatible with that of CONTEC's DIO-1616L-PE. I-00 - I-17 16 input signal pins. Connect output signals from the external device to these pins. O20 - O37 16 output signal pins. Connect these pins to the input signal pins of the external device. IP 0/1 Connect the positive side of the external power supply. These pins are common to 16 input signal pins. OP 2/3 Connect the positive side of the external power supply. ON 2/3 Connect the negative side of the external power supply. These pins are common to 16 output signal pins. These pins are common to 16 output signal pins. N.C. Figure 4.6. 38 This pin is left unconnected. Pin Assignments of digital I/O connector CX-100n User’s manual