Download Landtech GEM Manual

GEM2xxx Operation Manual
Clicking on Done will open the Export Readings to CSV screen.
Note: Depending upon your specific GEM2xxx Instrument model you will see additional fields specific to the
instrument. For example GEM2NAV has the fields of Latitude, Longitude, Altitude, Herror, Verror, and
HDOP Status that the other GEM2xxx models do not have.
This interface provides several options described below.
 To add or remove a single reading from export, uncheck the checkbox in the leftmost column.
 To add or remove a specific parameter from export, uncheck the corresponding checkbox across the
top.
 To clear all rows click the Clear All Rows button at the bottom of the screen. After Clearing all Rows
you can the button will change and you can Set all Rows
 To clear all column selections, click on the Clear All Columns button at the bottom of the screen. After
Clearing All Columns the button will change and you can then choose Set All Columns
 To exit the operation without saving, click the Cancel button.
 To specify a filename and save the selection to a file, click the Save File button. Clicking this button will
open a Save window.
Page 41
REV C2 (English) LANDTEC Release Date: November 30th, 2010