Download LCD User`s Guide

LSRpools (RDO)
If defining a VSAM local shared resource pool (LSRpool) via RDO,
ensure that the maximum keylength specified in the LSRpool definition
(‘Maxkeylength’ field) is set to a value which is not less than:
d) (length of the longest Archive Manager primary key) + 2
and
e) the highest possible value for the combined length of the primary key
+ the longest secondary key in any Archive Manager database for
which one or more secondary indexes have been defined.
Program List Table - post-initialization (PLTPI)
OTASP235 DFHPLT TYPE=ENTRY,
PROGRAM=OTASP235
This entry should be made in the third phase of PLTPI processing (i.e.)
after the DFHDELIM entry.
Program List Table - shut-down (PLTSD)
OTASP240 DFHPLT TYPE=ENTRY,
PROGRAM=OTASP240
This entry should be made in the first phase of PLTSD processing (i.e.)
before the DFHDELIM entry.
Destination Control Table (DCT)
The system transient data queue 'CSMT' must be present in the DCT to
receive Archive Manager information messages.
CICS definitions for a secondary Archive Manager region
The following entries will be required in each CICS region that is to be
initialized as a secondary Archive Manager region (i.e.) which contain the
Archive Manager online interface processing only. Note that for v2.6, an
entry is required for the primary index of each Archive Manager database
to be accessed from a secondary Archive Manager region. This was not
the case for releases of the product prior to v2.5.
Files (RDO)
One entry per database is required, as follows:
OTASxxxx – the primary index entry.
46
Archive Manager User Guide