Transcript
Use ShineCountry software to clear country setting and re-select If the inverter’s country / standard had been selected wrong, we need to first use ShineCountry software to clear the setting, then following the instruction on User Manual to reselect it. 1. Use ShineCountry software to clear country. a. Connect inverter and laptop via RS232-to-USB cable (or RS232 cable directly if you use desktop computer) b. Run ShineCountry software c. Fill in correct COM port number on COM port field. d. Check the Inverter COM Address on inverter LCD and fill in INV CommAdd field (the default is 1) e. Click “Clear”. Once accepted the inverter will reboot, and then display “Please Select VDE-0126”. 2. Follow the instructions on Use Manual to reselect a country standard. Usually it is in the Use Manual’s “Country selecting” chapter. Growatt New Energy Technology Co., Ltd 2014/8/22
