Download User`s Manual

4-7 Port Security
This section shows you to configure the Port Security settings of the Switch. You can use the
Port Security feature to restrict input to an interface by limiting and identifying MAC addresses.
4-7.1 Limit Control
This section shows you to to configure the Port Security settings of the Switch. You can use
the Port Security feature to restrict input to an interface by limiting and identifying MAC
addresses.
Web Interface
To configure a System Configuration of Limit Control in the web interface:
1. Select “Enabled” in the Mode of System Configuration.
2. Checked Aging Enabled.
3. Set Aging Period (Default is 3600 seconds).
To configure a Port Configuration of Limit Control in the web interface:
1. Select “Enabled” in the Mode of Port Configuration.
2. Specify the maximum number of MAC addresses in the Limit of Port
Configuration.
3. Set Ation (Trap, Shutdown, Trap & Shutdown)
4. Click Apply.
Figure 4-7.1: The Port Security Limit Control Configuration
252
Publication date: Dec., 2012
Revision A1