Download R-Series User Manual

R-series
4
Diagnostics
The R-series is not user serviceable. Specialized tools are necessary for the
repair of any R-series component.
4.1 Introduction
An abnormal condition may be indicated by a flash code on the Status output. A Flash Code
is a sequence of flashes, separated by a pause, followed by a repetition of the sequence.
Additionally, Flash Codes may be sounded by connecting a beeper to a suitably
programmed output and enabling the “BeepOnFault” feature. Depending on the condition,
the scooter may or may not allow driving. In some cases driving may be allowed but in a
reduced speed (‘limp’) mode.
4.2 Flash Code Display
To make the most of your existing industry knowledge of products, the R-series has the ability
to display a variety of different flash code types. These may be one of Scooter, Shark, Type 3,
or Type 4. The Diagnostics Report lists the Flash Code type that the controller is currently set to
display. See the following sections for each set of flash code details.
Chapter 4 : Diagnostics
43