Download Hitachi Microcomputer Development Environment System H8/300H

Transcript
4.9.2
Setting a Trace Filter
Currently the Trace window shows all the MCU cycles.
• Display the Trace Filter dialog box by clicking the Trace window with the right mouse
button and selecting Filter... from the popup menu.
This allows you to define a filter to restrict which cycles will be displayed in the trace buffer.
• If necessary, click General to show the General panel.
• Select Pattern in the Type section.
• In the Address section click Address and type H'109a in the Address Lo field.
Figure 4.37 General Panel in Trace Filter Dialog Box
• Click Bus / Area to display the Bus / Area panel.
• Set Bus State to CPU Prefetch.
Rev. 2.0, 12/00, page 54 of 66