Download THD-6290 - NextWave Digital
Transcript
UsingtheMENUSystem SD Output Aspect Ratio You can select best fitting display mode for your SD TV screen. This function is available only Composite Video and S-Video output when the 16:9 source is coming from Broadcaster. The 16:9 format is the standard mode for most wide TV screens. You can select Widescreen or 4:3 Letter Box for fit your SD TV s screen. 1) 2) 3) 4) 5) 6) 7) Press Press Press Press Press Press Press MENU to display the menu. OK or RIGHT to select the User Preference menu. DOWN to select display format menu. RIGHT to select sub-menu. UP or DOWN to select desired display format. OK or RIGHT to save the selected display format. MENU to exit the menu. i-Plate Banner Duration You can adjust Information Banner (i-Plate) time duration. If you feel i-Plate time is too long or shor t, you can select time out period using i-Plate Banner Duration setup. It is affected with i-Plate and 7-DAY EPG display. . Front Panel LED Dimmer You can adjust front LED display brightness. If you feel the front panel LED is too brighter or darker, you can adjust the brightness of LED display using Front Panel LED Dimmer setup. Power Restore This HD-STB has Power Restore function. If you setup the Power Restore to Enabled and when AC main power is restored, the HD-STB will automatically turn on and display final memorized channel. It is useful for multiple display or exhibition for control the HD-STB. After setup the Power Restore to Enabled, just turn on the AC main power for HD-STB on and turn off the AC main power for HD-STB off. The factory default value is Power Restore Disabled. 20