Download AC_CP_LCM_Manual_EN

2
The pin holding the test strip drum in position retracts with an audible
CLICK.
 Insert a new test strip drum in the meter as illustrated (the two rows
of bar code must be nearest the display window).
 Close the drum compartment cover and push it shut. There will be
an audible CLICK.
The meter turns on and rotates the test strip drum until the first test
strip is in the correct position. At the same time the meter reads the bar
code that provides it with information on the specific characteristics of
the test strips. After that, the meter turns off.
If there is a test strip drum in the meter:
 Tip the meter forwards.
The test strip drum drops out.
26
Initial steps before testing
Initial steps before testing
27