Download User Manual

ADVANCED OPERATION
4)
PORT
The valid number ranges from 1 to 9999. The default value is 80. Typically, the TCP port used by HTTP is 80.
However in some cases, it is better to change this port number for added flexibility or security.
See the example below:
STATIC
NETWORK TYPE
STATIC
IP
GATEWAY
NETMASK
PRIMARY DNS
SECONDARY DNS
PORT
192 . 168 . 001 . 012
192 . 168 . 001 . 254
255 . 255 . 252 . 000
168 . 095 . 001 . 001
139 . 175 . 055 . 244
0080
PLEASE CONSULT YOUR INSTALLER FOR ADVANCE SETTING
uv SELECT s BACK t NEXT ENTER
5.7.2. PPPOE
5)
NETWORK TYPE
Select the network type as PPPOE.
6)
USER NAME / PASSWORD
Set the “username” and “password” subscribed from your ISP supplier
7)
DNS (PRIMARY DNS / SECONDARY DNS)
Key in the IP address of the domain name server obtained from your ISP (Internet Service Provider).
8)
PORT
The valid number ranges from 1 to 9999. The default value is 80. Typically, the TCP port used by HTTP is 80.
However in some cases, it is better to change this port number for added flexibility or security.
See the example below:
PPPOE
NETWORK TYPE
USER NAME
PASSWORD
IP
GATEWAY
NETMASK
PRIMARY DNS
SECONDARY DNS
PORT
PPPOE
EMPTY
EMPTY
000 . 000 . 000 . 000
000 . 000 . 000 . 000
000 . 000 . 000 . 000
168 . 095 . 001 . 001
139 . 175 . 055 . 244
0080
PLEASE CONSULT YOUR INSTALLER FOR ADVANCE SETTING
uv SELECT s BACK t NEXT ENTER
Note: The PPPOE function needs to have one “username” and one “password” subscribed from one ISP
supplier, and a “DDNS account” to correspond the dynamic IP address to a specific “Hostname”.
17