Download System Configuration Manual

2.2.4.3.1.1) Assigning a DID
1. First Add the number from the + icon.
2. Type in the number in the DID Number box, and click “Add.”
3. Find the number in the DID Number list, and click the edit button in the left-hand
column.
4. The DID Number will automatically populate, and the other information needs to be
filled out.
a. Description – Brief explanation of the number.
b. DNIS Name – Name to display on a device’s CID screen for an incoming call to
this DID (optional).
c. DNIS Number – Number to display on a device’s CID screen for an incoming call
to this DID (optional).
d. Prepend Caller ID – A prefix name or code to show up on incoming calls
(optional).
e. This is a Toll Free Number – Sets whether incoming calls are treated as a toll free
number or not.
f. This Number has E911 Enabled with PSAP – Set this if another E911 database or
service has the DID’s E911 information on file, otherwise E911 information must
be configured manually for each extension and number.
g. Route – Determines where the incoming calls should go.