Download WorldTracker RF - Tracking the World

WorldTracker RF Manual
Page 9
Advanced Tracking
1.10.
Multiple Unit Tracking
Setting up the TracID Network
To configure the transmitter units, you will use the hardware configuration wizards.
A well-planned network of transmitter units enables the units to send position data at the
required time intervals, without interference.
All transmitter names must be unique, and each transmitter must be assigned to a
different channel.
Global Setting - All units on network
Network
0
Can be 0-6
Total Units
10
Can be 1-590
Update (Seconds)
1
Can be 1-60
Indivdual Setting - Each unit different setting
TracID
Channel
TG1
1
TG2
2
Each unit has its own ID and
TG3
3
Channel. Duplicates in this list
TG4
4
will cause interference in the
TG5
5
entire network.
TG6
6
TG7
7
TG8
8
TG9
9
TG10
10
Figure 4: Global Network Settings
When planning your network, first answer the following questions:
1. What network number will you use? The wizard can define up to seven networks,
numbered 0-6. (Devices on separate networks cannot communicate with each
other.)
2. How many units do you want to track? When you first set up a network, it is a
good idea to name several extra units, so that you can add more units in the future.
2004 Security Concepts.