Download User`s Manual

34
04
1. Channel Mode (PTZ model)
a. The Default setting is none.
b. Selectable options include PelcoP / PelcoD / Merit-Lilin /
Transparent / Visca /DynaColor.
2. Channel ID
a. Define the address value. The default value is zero.
3. Baud rate / Data bits / Parity / Stop bits
a. The values of these parameters depend on the enabled protocol.
PORT
Caution: The default port value is 80. Users may change the value. Please
pay attention that if the port is changed (e.g.80), users have to put :80 in the end
of the IP address.
The values of WEB and AV port can be changed.
34