1
Download TD Direct User Guide
Transcript
Figure 4-24 Multi-Edit Selection Filter for thermal tags • submodel name (Section 4.4.1.1) • material and orienter names (Section 4.4.1.2) • domain names (Section 4.4.4) For surfaces and faces of bodies, the tag options are: • submodel name (Section 4.4.1.1) • material and orienter names (Section 4.4.1.2) • thickness (Section 4.4.1.3) • optical property name (Section 4.4.2.1) • insulation material name and thickness (Section 4.4.2.2) • radiation analysis group names and active sides (Section 4.4.3) • domain names (Section 4.4.4) For edges, the tag options are: • submodel name (Section 4.4.1.1) • domain names (Section 4.4.4) These options are described in the above-referenced subsections. Some tags for faces, such as optical properties, insulation, radiation analysis groups, and domains, can be defined for specific sides of the face. The sides are positive (or top), and negative (or bottom). Meshing with TD Direct 4-25
